Foscam Outdoor Surveillance Camera User Manual
Getting Started
Package Contents
Security Tips
- Please change the camera’s password regularly, using a combination of numbers, letters, and special characters.
- We recommend that you regularly update your camera with the latest available software and firmware to ensure the best experience with your camera.
Physical Description
Add Device: Connection via the Foscam App (Recommended)
It is strongly recommended that you complete the “add devices” process on the Foscam app before the Floodlight hardware is installed.
Before You Get Started
Scan the QR code below to download and install the Foscam APP, and learn how to add the Floodlight camera to the APP.
To ensure a smoother video experience on your smartphone, it is recommended that your smartphone meet the following specifications:
- iOS: version 11 or higher.
- Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU).
Note: For the best experience, please update the APP to the latest version!
WiFi Connection
- Please tighten the antenna clockwise and make sure it is in a vertical position.
- Connect the camera to your router with an Ethernet cable.
- Plug the power adapter into the camera, and then wait for about 1 minute.
- Make sure your smartphone is connected to the same WiFi network as the camera.
Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band—most newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID: XXXXX_2.4G - Open the Foscam app and please register a Foscam account, or sign in if you have one already.
- After logging into the Foscam APP, select the “Tap to add a camera” or “+” icon on the upper right corner, then select “Scan the QR code” and scan the QR code labeled at the bottom of your camera.
- There are two options in the following steps, please pay attention to choosing the corresponding adding method.
- Please wait for a few seconds, you can tap “Configure WiFi” in the “Configure WiFi” interface, then select your WiFi network and enter your WiFi password. After, you can set the camera name and tap “Save” in the “Set name” interface.
Note: It is strongly recommended that you choose to configure WiFi at this step. - Please wait for a few seconds, you can tap “Configure WiFi” in the “Configure WiFi” interface, and then you tap “Skip” in the “WiFi Settings” interface. After, you can set the camera name and tap “Save” in the “Set name” interface.
Note: If the adding process fails, please reset your camera and try adding again according to the above method.
- Tapping on the play button in the video box will jump to the “Camera Login” setting interface. For your security, please set a new username and password for your camera before viewing live video.
- After completing the above steps, you can begin using your camera.
Note: If you choose installation step 7.2, please refer to the following steps for configuring WiFi. After setting your WIFi, you can unplug your network cable and the camera works normally.
Configure WiFi
If you selected “Skip” in
button > Tap “WiFi Settings” > Select your WiFi network and enter your WiFi password. After setting up successfully, you can view a live video without the Ethernet cable.
PC Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like to manage multiple cameras, we suggest you install Foscam VMS. You can download the “Foscam VMS ” Windows version from foscam.com/vms and can download the “Foscam VMS” Mac version from the APP store: https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note:
For the best experience, please update Foscam VMS to the latest version!
Add the IP Camera
- Run Foscam VMS, then create a local administrator account and log in.
- Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your camera. Please visit foscam.com/downloads to view the user manual and for additional detailed steps.
Hardware Installation
Point the camera at the desired location and use the screws provided to mount it. 0~90° 0~360° 0~360° Please Note: Ensure that rain or water will not reach the connector ports at the end of the tail cable. These connectors are not weather-resistant.
Important Notice
Camera Username & Password
The camera username & password are used to access and manage your camera. Having a strong password can significantly improve the security of your camera. If you have forgotten either of them, please press the “Reset” button and hold it for more than 10 seconds while the camera is powered on. After releasing the button. The camera will automatically reboot and the default settings will be restored. You can then reconnect the camera by following this Quick Setup Guide.
Foscam Cloud Service Account Username & Password
Your Foscam Cloud service account and password may be used to access both the Foscam App and the Foscam Cloud service website. Therefore, you can register your account username & password on either one.
Storage Media
Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (supports FAT32 and exFAT format) storage formats. If you wish to record and play back large amounts of video, we recommend using a Foscam NVR device as well.
Firmware Upgrade
You can upgrade the firmware of your camera with the Foscam App by using the new “One-Key Online Upgrade” feature (Open the Foscam App and Login into the camera, select Settings > Firmware Upgrade). You also can download the latest version to upgrade your camera from our official website foscam.com/upgrades.
Safety Tips
- Please ensure that the proper power supply is used before using the camera.
- Please install the camera securely using the screws provided.
- Please use this product within the temperature range. When the ambient temperature is too high or too low, it may cause product failure.
- To avoid the risk of fire or electric shock, please keep your camera connectors in a cool, dry place.
- Please keep the camera out of reach of small children.
- This product is not a toy; children should use the product under adult supervision.
- Change your default port to a greater range to help ensure the safety of your connection. How to change the default port: please visit foscam.com/downloads to view the user manual.
- Check the logs of your Foscam cameras frequently. Foscam Foscam
- Cameras have embedded logs reminding you of which IP address addresses are accessing the camera.
Product Performance
- WLAN frequency range: 2412MHz – 2472MHz Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, 518055, China
- Maximum transmission power: < 19dBm
- Wireless Standard: IEEE802.11b/g/n (2.4GHz)
- Power Supply: DC 12V 1.0A 12W
Technical Support
If you have problems with your Foscam device, please contact the reseller you purchased from, or you can e-mail the company headquarters technical support team: at support@foscam.com Your valuable comments and suggestions on improving Foscam products are welcomed!
