Table of contents
show
Fiet Electric MOT Smart Door and Window Sensor User Manual
Pre-Installation
TOOLS REQUIRED TO MOUNT SENSOR
HARDWARE INCLUDED
| Part | Description | Quantity |
| AA | Door/Window Sensor | 1 |
| BB | Magnet | 1 |
| cc | Double-Sided Tape for the Sensor | 1 |
| DD | Double-Sided Tape for the Magnet | 1 |
| EE | 1.5V AAA Alkaline Batteries | 2 |
| FF | Mounting Screws | 4 |
Description
| ITEM DESCRIPTION | |
| Latch Button | Press to release the lock |
|
Status Light |
|
| Tamper Switch | Sends a notification in-app when the sensor is being tampered. |
| Reset Button | Press and hold for 5 seconds to reset the sensor. |
Screw Installation
- Remove the back plate from the Door/Window Sensor (AA) by pressing the latch button on top and gently pulling the back plate until it releases.
- Remove the back plate from the Magnet (BB) by grasping it from the middle and gently pulling the back plate until it releases.
Install Backplates with Screws
- Mark screw positions using the Door/Window Sensor (AA) backplate on your door frame or window frame and Magnet (BB) backplate on your door or window, or vice versa.
- Use the Mounting Screws (FF) to attach the backplates to the wall.
Insert Batteries or Remove Tag
- Insert two 1.5V AAA Alkaline Batteries (EE) or remove tag if batteries are already present in the open Door/Window Sensor (AA).
- Turn on the Door/Window Sensor (AA) by pushing on the RESET button. Follow the steps in the APP Setup on page 6.
Attach Door/Window Sensor and Magnet to Backplates
- Attach the Door/Window Sensor (AA) and Magnet (BB) to the appropriate Backplates until they lock in place.
- Door/Window Sensor (AA) and Magnet (BB) Arrows should align.
Adhesive Installation
Remove Backplate
- Remove the backplate from the Door/Window Sensor (AA) by pressing the latch button on top and gently pulling the backplate until it releases.
- Remove the backplate from the Magnet (BB) by grasping it from the middle and gently pulling the backplate until it releases.
Install Backplates with Double-Sided Tape
- Clean the mounting area thoroughly (surface must be free of dust, dirt or grease).
- Stick Double-Sided Tape for the Sensor (CC) to the backside of the Door/Window Sensor (AA) backplate. Stick Double-Sided Tape for the Magnet (DD) to the backside of the Magnet (BB) backplate.
- Peel the Double-Sided Tape (CC) (DD) and place the Door/Window Sensor (AA) backplate on your door frame or window frame and Magnet (BB) backplate on your door or window, or vice versa.
Insert Batteries or Remove Tag
- Insert two 1.5V AAA Alkaline Batteries (EE) or remove tag if batteries are already present in the open Door/Window Sensor (AA).
- Turn on the Door/Window Sensor (AA) by pushing on the RESET button. Follow the steps in the APP Setup on page 6.
Attach Door/Window Sensor and Magnet to Backplates
- Attach the Door/Window Sensor (AA) and Magnet (BB) to the appropriate Backplates until they lock in place.
- Door/Window Sensor (AA) and Magnet (BB) Arrows should align.
APP Setup
Download and install the Feit Electric app
- Search for the Feit Electric app in the App Store or Google Play Store.
- Download and install the Feit Electric app on your smart device.
Set up the Smart Door & Window Sensor using the Feit Electric app
Check to be sure the Sensor is in pairing mode. The BLUE Indicator light must be blinking rapidly to connect. If not
already blinking, press and hold the Reset button for five seconds. Use the Felt Electric app to complete the set up.
Troubleshooting Tips
If you are having difficulty connecting:
- Make sure the Wi-Fi network is a 2.4 GHz network. Smart Door and Window Sensor will not connect to a 5 GHz network.
- Test your Wi-Fi network with other devices such as your phone to make sure it is operating properly.
- The Wi-Fi connection may not have good coverage during set up. Try moving the Smart Door and Window Sensor closer to your Wi-Fi router.
- Your Wi-Fi network password is case sensitive, make sure you are entering it correctly.
