Morecam J7 Wireless Doorbell Camera User Manual

Morecam J7 Wireless Doorbell Camera User Manual

Warranty Service

Thanks for your shopping and trust. We are continuing to optimize products and improve our lifetime customer service to offer you a better shopping experience. If you have any problems, please feel free to contact us. We will solve your problems within 24 hours. Besides, your advice or suggestions will be much appreciated and welcomed. Register via the link below to get a 3-year Warranty Extension. http://bit.ly/zuReg

Product Service

• Email: support@mubview.com
• Distributor: business@mubview.com

About Us

• Web: www.mubview.com
• Facebook: www.facebook.com/mubview
• Amazon Store: www.amazon.com/mubview

Charge the Doorbell

Please charge your doorbell with a DC 5V 1A~2A phone adapter and the provided charging cable. The LED will glow blue once fully charged.

Supply Power to the Chime

Power by three AA batteries
Three units of AA batteries are required to make your indoor chime 100% wire-free. And you will be free to place your chime in almost anywhere indoors. *Please mind the electrodes when installing batteries!

Power by DC 5V adapter
You can also plug in the provided USB cable and connect the chime to a DC 5V 1A~2A phone adapter.

What’s in the Box 

• Doorbell * 1
• DingDong *1
• Quick User Guide *1
• USB Cable *1
• Screws Set/Screwdriver *1
• 3M Tape *2

NOTE: Micro SD card and power adapter are not included

Switch on the Doorbell
Remove the wall mounting bracket and silicone cover, and switch on your doorbell. The LED indicator will flash red (once per second), and it is ready for network setting.

• Solid Red Device is abnormal
• Flashing Red Slowly (Once per second Ready for WiFi configuration
• Flashing Red Quickly (Twice per second Device is connecting to WiFi
• Solid Blue Successfully connected to the WiFi network
• Flashing Blue Slowly (Once per second Live-viewing doorbell camera
• Flashing Blue Quickly (Twice per second Upgrading doorbell firmware

Download and Install App
Download the Mubview App from Google Play™ or App Store™. Or scan the QR codes below, with your smartphone. *Google Play™ is a trademark of Google Inc. App Store™ is a mark of Apple Inc.

NOTE:
Make sure to turn on both permissions below.

1. Allow the Mubview App to access mobile cellular data and wireless LAN, otherwise, it will fail to connect the camera (in the mobile Setting).
2. Allow the Mubview App to send messages, otherwise, the phone will not receive alarms when motion is detected (in mobile Setting-Mubview).

Account Registration
New user needs to sign up in the Mubview App with an email address. Click ‘Sign up’ to create a New Account and follow the steps to complete registration.

Add Doorbell to App

Preparations for connection

1. Insert a Micro SD Card into the camera to save video clips or you can start the 3-day free cloud service. Without a Micro SD Card or cloud service, no video will be saved.
2. The camera only supports 2.4GHz Wi-Fi, not support 5GHz.
3. When connecting to the network, please take the camera close to the router(suggest within 10-15ft)

Connect Doorbell to App

Connect the Chime

Click reset button
Click RESET on the chime, and the chime indicator on the left will flash red for 20 seconds, indicating that the chime is in pairing mode.

Press your doorbell to pair up
Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing. Chime pairing succeeds. NOTE: If your home is large and you need more than one Dingdong, please buy it on Amazon or contact the Mubview team to get an extra 2.

Install the Doorbell

Select a location

You can purchase the following angled brackets to point your doorbell to a specific view angle.

Mark the screw holes & Install the wall mount

1. Take apart the wall mount from your doorbell and mark the location of the two mounting holes on your wall. 10  support@mubview.com
2. Screw your bracket into the wood wall with the provided screws. If installing on stucco, brick, or concrete, drill holes in the wall, then insert the included anchors before driving in the mounting screws.

Mount your doorbell
Attach your doorbell to the mounting bracket and snap the doorbell to make sure it reaches the bottom. Then secure it with the provided star-shaped security screw.

Tamper Alert Setting
Kindly note the anti-theft alarm in the doorbell settings.

Tamper Alert on

Once the doorbell is detached from the bracket, a 30-second alarm will be triggered. Meanwhile, video recording will be activated, and alarm notifications will be pushed to the owner’s APP account.

Tamper Alert off

The owner can disable the tamper alarm in doorbell settings, and detach the doorbell for battery recharging or maintenance.

Product Specifications

Video Doorbell Model No.: Bell J7

Wireless Chime Model No.: Chime 06

REFERENCE LINK