XTU J7 Smart Video Doorbell Camera User Guide
Introduction of doorbell
Introduction of chime
Charge your doorbell
Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED.
Compatible charger ( not provided ):
USB compatible mobile phone charger (DC 5V = 1A-2A).
Power on Camera
- Switch on power for your doorbell, and you will see the LED indicator flashes red (once per second). Start setting up your doorbell following the in-app instructions.
Tips
- Please operate the setup near your Wi-Fi router.
- Make sure your phone is connecting to a 2.4GHz Wi-Fi.
- Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.
- Ensure the Wi-Fi signal is good, and the Wi-Fi password is correct.
App Instructions
- Start setting up your doorbell following the in-app instructions.
Pair with your indoor chime
- Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.
Press the doorbell button to send a pairing signal, and your chime will sound to react together with its blue LED flashing. Chime pairing succeeds.
Press the doorbell button to send a pairing signal, and your chime will sound to react together with its blue LED flashing. Chime pairing succeeds.
Install Your doorbell
- Select location for your doorbell.
(OPTIONAL) Install at an angle: You can purchase the following angled brackets so as to point your doorbell to a specific view angle.
Standard installation.
(OPTIONAL) Install at an angle: You can purchase the following angled brackets so as to point your doorbell to a specific view angle.
Standard installation.
Tamper Alarm
Anti-theft Tamper Alarm
You can also enable the anti-theft alarm in doorbell settings.
Tamper Alarm On
With tamper alarm on, your doorbell detects disassembly by the trigger on its back, and then a 30-second siren alarm will be triggered. Meantime, video recording get started, and alarm notification will be pushed to the owner’s APP account.
Tamper Alarm Off
You can disable the tamper alarm in doorbell settings, and detach the doorbell without any alarm for battery recharge or regular maintenance.
Troubleshooting
Does it support legacy hard wire power source?
No, it doesn’t. If you need longer battery endurance, suggest that adding a solar battery charger for your doorbell, if only there is sunshine in your doorbell location. You can contact our after-sale service to know where to buy.
How many wireless chimes can be added to the doorbell?
You can add as many wireless chimes as your wish on one video doorbell.
Does it support customized Motion Detection zones.
Yes it does. You can customize the detection zone in the doorbell settings.
