MayFlash-MAGIC-S-PRO-USB-Wireless-Adapter-User-Manual-featured-img

MayFlash MAGIC-S PRO USB Wireless Adapter User Manual

MayFlash logo

MayFlash MAGIC-S PRO USB Wireless Adapter User Manual

MayFlash-MAGIC-S-PRO-USB-Wireless-Adapter-User-Manual-prduct-img

MAGIC-S PRO 2

Connect your Bluetooth or wired USB controllers to your PS4, PS3, Switch, PC Windows, macOS, NEOGEO mini, NEOGEO Arcade Stick Pro, PS Classic, SEGA MEGA DRIVE mini, SEGA Genesis Mini, SEGA Astro City Mini, Raspberry Pi entertainment system. If you find any issues or have any difficulty operating the device,please reach out to us at info@mayflash.com and we will be more than happy to help you out. Update to the latest firmware at www.mayflash.com

lncludes

MayFlash-MAGIC-S-PRO-USB-Wireless-Adapter-User-Manual-fig-1

System Compatibility

MayFlash-MAGIC-S-PRO-USB-Wireless-Adapter-User-Manual-fig-2

Controller Compatibility

Bluetooth Controllers
DualSense, DualShock 4, DualShock 3, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U Pro.

Wired USB Controller
DualSense, DualShock 4, DualShock 3, Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40 TR Controller PlayStation 4, PlayStation 4 SCUF Vantage 2 Controller, SEGA MEGA DRIVE and SEGA Genesis Mini USB Controller Pads, Logitech rumble gamepad F510 and F310, PS Classic Controller, Switch Taiko Drum, PS4 Taiko Drum. The wireless controller that comes from your console will become a wired controller by simply connecting a standard USB cable (except for Xbox 360 which requires an official Microsoft wired Xbox 360 controller). For best results, it is recommended that you use original Switch Controllers, or genuine Xbox or PlayStation controllers and quality certified USB cables.

Quick Start Guide

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-3

USB A-Male
Connect the adapter to your game console.

USB A-Female
Connect the wired game controllers to the adapter.

LED Indicators

System mode 

Switch

 

Switch Pro

 

PS3/Raspberry Pi/ PC (Dinput)

 

Raspberry Pi/ PC (Xinput)

NEOGEO Arcade Stick Pro/ NEOGEO mini 

macOS

SEGA MEGA DRIVE Mini/

SEGA Genesis Mini/ SEGA Astro City Mini

 

LED Indicator

RedPurpleBlueGreenYellowCyanWhite

 

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-4

  • LED Indicator blinks slowly: The Bluetooth is not connected yet.
  • LED Indicator blinks quickly: The Bluetooth is Pairing.
  • LED Indicator becomes solid: The connection is successful.
  • Switch Pro mode (LED is purple): Go to System Setting Controller and Sensors > Turn on Pro Controller Wired Communication.
  • Bluetooth headset only works for Switch mode (LED is red).

The button on the side of the adapter

  1. Press the button shortly to pair the controllers and the adapter. The indicator blinks quickly.
    MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-5
  2. To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds.

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-6

Bluetooth Controllers Set Up

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-7

  1. Connect the adapter to any spare USB port on your game console.
  2. To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly.
  3. Turn on the Bluetooth controller, press the Button on the side of the adapter, and then press the pair button on your Bluetooth controller. The LED indicator blinks quickly.
  4. The LED indicator becomes solid when the connection is successful.

Note:

  • If the Bluetooth pairing fails, please connect the Bluetooth controller to the adapter using a USB cable (not included in the packaging, you can purchase it separately). As soon as the controller is identified by the system, you can remove the USB cable and start to pair it again.
  • If you are having issues connecting an Xbox Series S/X or Xbox Elite 2 controller to the MAGIC-NS 2, this is what we recommend:
    1. Disable or turn off any Bluetooth device (like your Smart TV or Set Top Box, etc.) within range of the controller.
    2. Turn off your Xbox Series S/X controller and turn it on again.
    3. Pair your Xbox Series S/X controller with MAGIC-NS 2 again by pressing the button on the adapter and pair the button on your controller (LED indicator blinks quickly). The pairing process may take a few seconds. Please be patient! The connection may be disconnected shortly and then connected again during the pairing process. Please wait patiently until the LEDs stop blinking.
    4. The LED indicator becomes solid when the connection is successful.

Wired Controllers Set UP

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-8

  1. Connect the adapter to any spare USB port on your game console.
  2. Connect the wired controller to the adapter. The wireless controller that comes from your console will become a wired controller by simply connecting a standard USB cable (except Xbox 360 which requires an official Microsoft wired Xbox 360 controller).
  3. Your controller is now ready to use.

Modify the Vibration Intensity

  1. Press and hold the buttons R1/RB and R3 for 3-5 seconds until the controller keeps rumbling. (Please keep holding these two buttons until you finish the below whole process).
  2. To modify the vibration intensity, press the D-Pad “Up” or “Down”.
  3. To quit the modification, release any button of R1/RB or R3 once you’ve got your preferred vibration intensity.
  4. There are 7 levels of vibration intensity. The default one is 100%.

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-9

Adjust the Dead Zone

  1. Press and hold the Button START and D-Pad Left or D-Pad Right. Once the LED on the adapter starts to blink, you may release the Button D-Pad Left or D-Pad Right, BUT keep holding the Button START.
  2. To increase or decrease the dead zone, press the D-Pad “Up” or “Down”.
  3. As soon as you get the right dead zone value, you may release the Button START to quit the process.
  4. There are 7 levels of the Dead Zone Value. The default one is Level 3

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-10

Using Bluetooth Headset (Only for Switch mode / LED Red)

  1. Power on your Bluetooth headset to enter into the pairing mode.
  2. Press the pair button on the side of the adapter, LED starts to blink rapidly, wait for a few seconds.
  3. LED becomes solid when the connection is successful.

Note: 

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-11

  • Switch mode (LED is Red) does not support 6-axis motion and vibration.
  • If you need the 6-axis motion and vibration, please go to Switch Pro mode (LED is Purple)
Update the Software

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-12

If you are having problems with the adapter, you can follow the below instructions to update. Download the software from http://www.mayflash.com/Support and install it on your Windows system. Double-click on the updater and leave the updater window open on your screen. Press and hold the button on the side of the adapter, and connect the USB from your adapter to any spare port on your PC. Wait for 3-5 seconds. As soon as the adapter has been recognized, you may release the button. Select “Update”. Do not disconnect the device until you are informed that the update is completed successfully.

Additional Functions

MayFlash-NS-2-Wireless-Controller-USB-Adapter-User-Manual-fig-13

  1. Only one Bluetooth controller is supported for one adapter.
  2. A wired USB controller and a wireless Bluetooth controller can be connected at the same time, but both of them have the same functions and can only play one game character.
  3. To switch A-B, B-A, X-Y, Y-X, press and hold the button “START” and “A” for 3 seconds.To switch A-A, B-B, X-X, and Y-Y, press and hold the buttons “START” and “B” for 3 seconds. (This function is optional. It depends on the different controllers.)
  4. The TouchPad button on the PS4 Controller works as the Capture button of the Joy-Con or Switch Pro controller when you connect your PS4 controller to the Switch system by the adapter. Please see more details about the other controllers on the below “Controllers Buttons Table”
  5. To disconnect the controller and the adapter, press the button on the side of the adapter. But if you want to disconnect the Xbox Elite 2 and the adapter, you need to press and hold the HOME button on your controller to shut off the power.
  6. The adapter can remember up to 6 paired wireless controllers. But if your controller is a BLE device like Xbox Series X/S, then the adapter can only remember one.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

MayFlash-MAGIC-S-PRO-USB-Wireless-Adapter-User-Manual-fig-3

REFERENCE LINK

https://www.mayflash.com/

Leave a Reply