Table of contents
show
Braun BC08 Digital Travel Alarm Clock User Manual
Parts Description
Battery Precautions
- Do not use rechargeable batteries.
- Use only alkaline AAA batteries of the same or equivalent type.
- Insert batteries with the correct polarity.
- Keep batteries away from children.
- Dispose of exhausted batteries according to local legal requirements. Do not dispose them by throwing away with normal household rubbish.
- Avoid short circuiting the contacts in the battery compartment and battery terminals.
- Remove batteries from the unit if it will not be used for long period of time.
- Exhausted batteries should be removed from the battery compartment to prevent over-discharge, which can cause leakage and may cause damage to the clock.
Getting started
- Remove the battery door.
- Insert 1 x AAA size new battery as indicated in the battery compartment, and press the “reset” key to reset the clock. The display will turn on after a few seconds.
- Close the battery door.
Function keys
TIME SETTING / NEUTRAL / ALARM SETTING switch
- Slide the switch to the TIME SETTING position ( ) to set the clock time.
- Slide the switch to the ALARM SETTING position ( ) to set the alarm time.
- Slide the switch to the NEUTRAL position to exit the setting mode and return to normal display.
+ Key
- When the setting switch is in the NEUTRAL position, press the key to change between 12 and 24 hour display format.
- In TIME SETTING or ALARM SETTING mode press to increase the setting value. Press and hold to speed up the setting.
– Key
- In TIME SETTING or ALARM SETTING mode press to decrease the setting value. Press and hold to speed up the setting.
ALARM ON / OFF slider
- Shift the ALARM ON / OFF slider up to enable the alarm.
- Shift the ALARM ON / OFF slider down to disable the alarm.
SNOOZE / LIGHT touch button
- Tap to turn on the backlight for 10 seconds.
- Tap to stop the alarm and activate the 5 minute snooze function.
Product description (Image 1)
- LCD display
- SNOOZE / LIGHT touch button
- ALARM ON / OFF slider
- TIME SETTING / NEUTRAL / ALARM SETTING switch
- + Key
- – Key
- Battery compartment
- RESET key
Display details (Image 2)
- Time
- AM / PM indicator (for 12 hour format)
- Alarm time
- Alarm icon
Setting the Time
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the TIME SETTING position ( ).
- Press the ‘+’ or ‘-’ key to set the desired value. Press and hold the ‘+’ or ‘-’ key to speed up the setting.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Setting the alarm
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the ALARM SETTING position ( ).
- Press the ‘+’ or ‘-’ key to set the desired value. Press and hold the ‘+’ or ‘-’ key to speed up the setting.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Using the alarm and snooze function
- Enable the alarm by shifting the ALARM ON / OFF slider up (so the green detail is visible). The bell icon ( ) will appear on the LCD display.
- Tap the SNOOZE / LIGHT touch button to stop the alarm and activate the snooze function. When the snooze function is activated, the bell icon ( ) will flash.
- To disable the alarm and snooze function, shift the ALARM ON / OFF slider down. The bell icon ( ) will disappear.
Note: When the snooze function is activated, the alarm will automatically start again after 5 minutes. The snooze function will not stop unless the ALARM ON / OFF SLIDER is shifted down.
