PDP-GAMING Rematch Wired Switch Pro Controller User Guide

PDP-GAMING Rematch Wired Switch Pro Controller User Guide

Initial Setup

1.  To use the controller, plug the USB cable into the Nintendo Switch dock. The controller should automatically
   pair with the device.
2.  If the controller does not pair automatically, go into System Settings > Controller and Sensors > Change
   Grip/Order.
3.  When prompted, press L and R on your controller to connect.

Note: You can also pair the controller directly from the Controllers Menu found on the Nintendo Switch Home Screen and select Change Grip/Order.

Audio Setup

1. Plug the 3.5mm jack of your headset or headphones directly into the 3.5mm port on the controller.The Nintendo Switch only supports one audio output at a time. When connecting your headset/headphones into the controller, audio via HDMI connected devices (i.e. TV, amp, etc.) will be disabled. When connecting more than one USB audio device, only the first device will have audio output.
2.  You will be prompted by the Nintendo Switch to reconnect the controller. Press L and R to connect and then
   audio will start playing through the headset/headphones.
3.  If you do not hear sound after reconnecting your controller, please go to the Nintendo Switch OS settings to
   make sure the volume is above 0%.

Note: Under the System Settings, there’s an audio setting called “Mute when Headphones are Disconnected”
that can be enabled. When activated, this option will shut off the system speakers when unplugging or
disconnecting a headset until the volume buttons are pressed, or until this setting is manually turned off. To
disable this setting manually, select System Settings > System > Mute when Headphones are Disconnected (turn
to off).

 Volume Controls

1.  To adjust the controller’s volume, hold down the “function” button and press the Up/Down on the D-pad.
2.  You can easily mute your connected headset/headphone’s mic by pressing the “function” button twice. To
   unmute, press the “function” button twice again.

Note: The volume controls only adjust the volume output by the controller, and not the volume level of the Nintendo Switch OS. Adjust the Nintendo Switch OS volume in the device settings.

Programming the Back Buttons

A. To program the back buttons, hold the “function” button and press the button you’d like to map a control to.
Once the LED is flashing, press any button on the controller to map that button’s function to the back. The LED
will blink quickly 3 times, indicating successful programming.
B. To clear a mapped function or disable the back buttons completely, hold down the “function” button and
double press any back button.

Removing/Adding Interchangeable Pieces

The REMATCH Wired Controller is compatible with all REMATCH and Faceoff Deluxe+ Audio Wired Controller
face plates and interchangeable pieces (D-pad, analog sticks, and stick gates) to easily swap out and snap in
different looks.

Note: Before removing or installing any of the interchangeable pieces, the face plate must be removed.

 FACEPLATES

1.  To remove the faceplate, locate the small finger indentation on the inside of the right controller grip and pull up.
2. To install a different faceplate, simply line up the faceplate to the controller and press on.

ANALOG STICKS

1. To remove the analog stick, use a little force to pull it off the controller.
2.  To add a different analog stick, line it up with the node on the controller and gently push the stick down.

LIMITED WARRANTY

• Coverage and Term: PDP warrants that this product will be free from manufacturing defects for two years from the original date of purchase. Manufacturing defects are those defects in materials and/or workmanship, subject to Final determination by PDP’s customer service department.
• Exclusive Remedy and Exclusions: The exclusive remedy for valid claims will be the replacement, or refund of the product. This warranty does not cover defects caused by accidents, improper or abusive use of the product, unauthorized or improper modifications, repairs, or handling.
• How to Get Service: Purchasers with product issues should not return the product to the store, but instead contact PDP’s customer service department first.
• Your Rights Under Applicable Law: This warranty does not affect the legal rights of customers under applicable state, provincial, or national laws governing the sale of consumer goods.

REFERENCE LINK

https://support.pdp.com/