DOSS BT-10 Wireless Portable Bluetooth Speaker User Guide

DOSS BT-10 Wireless Portable Bluetooth Speaker User Guide

 Packing Content

1. DOSS Sound Box Wireless Speaker
2. USB Type-C Charging Cable
3. User Manual

 Specifications

1.  Touch to switch among Bluetooth, TF card, and Aux in mode.
2. In Bluetooth mode/ TF card mode, touch to skip backward.
3.  Play/ Pause and handset button.
   • In Bluetooth mode, touch to answer/ end a call. Touch for 3s to reject a call.
   • Speak into the built-in mic located on the front part of the speaker.
   • In Bluetooth mode, touch to play/ pause music. Touch for 5s to disconnect with your device.
   • In TF card mode, touch to play/ pause music.
4.  In Bluetooth mode/ TF card mode, touch to skip forward.
5.  Volume control button.
   • Clockwise rotate on to turn up.
   • Counterclockwise rotate on to turn down.
6. Long press to turn on/ off.
7.  Play via 3.5mm Auxiliary cable (not included). In AUX in mode, audio playback can only be controlled via your device.
8. Play via TF card. TF card audio format: MP3, WMA, FLAC (Max capacity 32G, format to FAT32 or FAT)/ play in download order.
9. Type-C charge port.
10. Charging indicator

Indicator

Pairing DOSS Sound Box with Your Device

1. Place the speaker and your device within one meter.
2.  Turn on the speaker. The center indicator on the top flashes blue.
3.  Turn on Bluetooth on your device, and select DOSS Sound Box on the Bluetooth list.
4. Once paired, there’s a prompt tone and the top center indicator will change to steady blue. If the pairing fails, please repeat steps 1 through 3 again.

• Hold for 5s can disconnect DOSS Sound Box with your device..

Connect DOSS Sound Box to Echo Dot

You are able to connect the speaker to Echo Dot via Bluetooth/ Auxiliary.

1. Download Alexa app and get the Dot connected to your home Wi-Fi network.
2. Keep DOSS Sound Box in pairing status (Press for 5s to keep it in pairing status if it’s already paired with your device).
3.  Run the Alexa app, tap MENU and then tap SETTINGS.
4.  Tap the Echo Dot in the Alexa app and then tap BLUETOOTH.
5.  Select DOSS Sound Box in Bluetooth list. If it doesn’t appear in the list, hold for 5s and try to reconnect.

Product Specifications

• Output power: 6W x 2
• Driver unit: 1.5 inch driver x 2 + 2.6 inch passive radiator
• Frequency response: 100Hz-18 kHz
• Signal to noise ratio: >=55dB
• Unit weight: 560 g
• Unit dimension: 6.6 x 2.7 x 2.9 inch
• Bluetooth range: 10 meters/ 33ft
• Warranty: One-year limited

Battery

• Type: Li-ion 3.7V 2200mAh
• Input: 5V 1A
• Charging time: 3 hours
• Playback time: up to 20 hours (at 50% volume)
• Fully charge the speaker before initial use.
•  If the speaker beeps every few seconds, please recharge it for 2-3 hours.
• The speaker has a battery saver mode where it will auto power off without audio inputs for 15 minutes. To remove the function, please contact <support@dossav.com> for support

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protect on against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

REFERENCE LINK

https://www.dossaudio.com/