BOBOT Sound Air2 Portable Wireless Speaker User Guide
Packing Content
- 1x Bobtot Sound Air2
- 1x USB charging cable(Type-C)
- 1x 3.5mm AUX cable
- 1x Quick Start Guide
Specifications
- Wireless Version: V5.1
- Transmission distance: 10m
- Battery: 2500mAh
- Input: DC 5V/1A
- Charging: USB Type-C
- Frequency: 180Hz-18kHz
- Connection: BT, USB, AUX, TF supported
- Playtime: Up to 14 hours (varies by volume level and content)
Device Overview
Buttons & Controls
Buttons | You want to | How to |
| Turn on/off | Long press |
Play/pause | Short press | |
Call back | Double click (in BT mode) | |
Accept an incoming call | Short press (in calling mode) | |
End an incoming call | Short press(in calling mode) | |
| Switch light ( 6 modes to light off) | Short press |
![]() | Switch play (BT-USB-TF-AUX mode) | Double click |
Pair two speakers (TWS) | Triple press | |
Disconnect the BT | Long press (in BT mode) | |
Reject an incoming call | Press 2s(in BT mode) | |
| Increase the volume | Short press |
Next song | Long press | |
![]() | Decrease the volume | Short press |
Previous song | Long press |
Getting Started
Charging the speaker
The Sound Air2 comes pre-charged, but you may need to charge it before the first use, in case it is low on battery. it will take 3.5-4 hours to fully charge
Note:
- We recommend using a USB wall adapter with a DC 5V=1A output. (USB Type-C)
- The indicator light is red when charging.
- The indicator light turns off once fully charged
Turn ON the speaker
Long press the power button to turn on the Sound Air 2 speaker.
Pairing your mobile device
- Enable the BT feature on your smartphone or tablet and search for “Bobtot Sound Air2”, then tap to connect.
- When hearing the prompt sound “connected” the wireless is pairing successfully. You can enjoy the music.
Connect your device to the speaker via a 3.5mm audio cable
- When using the audio input mode, control audio playback via the connected device.
- When the aux cable is plugged in, play mode will automatically switch to AUDIO mode.
Play music from a micro TF card or a USB flash drive
Support capacity: max file size 64Gb Support files: mp3, FLAC,wav, Play in order: music will play in the download/copy order. Automatically play: when the TF card/ USB drive is inserted, the play mode will automatically switch to TF mode/ USB mode. (Normally the speaker would play the last inserted media.)
How to Set TWS Sync Mode?
- Step 1, Long press the power button
about 2s speakers to turn the first speaker on.
- Step 2, Turn on the BT searching mode on your device, search “Bobtot Sound Air 2” and connect.
- Step 3, Long press the power
button about 2s to turn the second speaker on.
- Step 4, Quickly triple-click the light
button of either speaker. You can hear an indicated sound, which means connect successfully.
Troubleshooting:
- Automatic shut down: when the battery power is low, the speaker will turn off automatically, please charge it. 2. Unable to play music: Reset the speaker and connect the BT again. If the music file is stored in the USB or TF card, check if the right connect mode, and double press the to choose the right mode.
- Unable to connect to the computer: Check if the computer has a BT function. If not, please connect the speaker and computer by the AUX cable and choose the right model by pressing the
.
- The button does not respond or the function is disordered: try again after reset.
- Stuck in an abnormal situation: press the power button for 8 seconds to reset.
Warning
- Do NOT drop, hit, or shake the device.
- Do NOT disassemble, repair, or modify the speaker.
- Do NOT use cleaning products that contain benzene, solvents, or alcohol.
- Do NOT expose the speaker to excessive heat or direct sunlight for prolonged periods.
- Do NOT store the device in a place with high humidity or dust.
- Do NOT use the speaker near a microwave oven or wireless LAN products.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against tharmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used following the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
REFERENCE LINK
https://www.bobtot.net/p/7.html