HamiltonBuhl Hygenx Sanitary Over Ear Headset Covers User Manual
Product
HamiltonBuhl’s Vray is a cordless UV-C Sanitizer that is safe, convenient, easy to use and keeps everyone healthier by killing the bacteria and viruses that cause diseases. Vray sanitizes 99.9% of common virus and bacteria and 99.997% of Human Coronavirus. See chart for sanitization times below. With its safety auto shut-off feature for avoiding direct exposure to UV-C radiation, Vray is the safe and easy way to sanitize items, such as: pens/pencils, scissors, desk/chair surfaces, books, staplers, laptop PCs, iPads, smartphones, door handles, faucets, keypads, instruments, toys, and more. Vray is convenient, cordless, portable, hands-free, lightweight and rechargeable.
Components
Specifications
- Model Number: HYGENX-VRAY
- Safety Features: Safety sensor, Timer,
- Overcharge Protection Circuit, Over Discharge
- Protection Circuit, Overcurrent protection circuit,
- Anti-Shatter UV-C Lamp: Anti-shatter coating prevents glass from shattering and keeps pieces of glass inside the coated lamp tube.
- Size: 19″W x 2.7″L x 4.3″H
- Weight: 1.11 lbs.
- Lamp: 8W UV-C Lamp, at 253.7 Wavelength
- Battery: L-lon Rechargeable
- Adapter: 100-240V, 50-60Hz, 12V 2.0A
- Charging Time: Approx. 2 hours
- Operation Time: Approx. 3 hours
- Please fully charge the unit before first usage.
Test Result Assessments between Strain Samples and HygenX™ Vray
See % reduction of the strain based on time and distance from the sample indicated on column headings.
Strains
5 Seconds
at 5cm (-20)
10 Seconds
at 20cm (-8*1
2 Minutes
at 5cm (-2*)
COVID-19|
Escherichia Coli (E-Coli)|
Pseudomonas Aeruginosa
Staphylococcus Aureus
Kiebsiella Pneumoniae
MRSA
Salmonella Typhimurium
Bacillus Subtillis
Vibrio Parahaemolyticus
Human Coronavirus
Influenza A Virus (H3N2)
Human Rhino Virus
5 Seconds
at 20cm (-87)
30 Seconds
at 20cm (-8°)
5 Minutes
at 20cm (-8″)
99.99%
99.9%
99.9%
99.9%
99.9%
99.9%
99.9%
99.9%
99.9%
98.531%
99.853%
99.9%
99.9%
99.9%
99.9%
99.9%
99.9%
99.9%
99.9%
*Human Coronavious me laoer cois and reovite more time to destroy. See columns at right.
99.99%
Killed in 5.10 seconds.
See columns at left.
99.997%
99.997%
99.999%
99.9999%
99.999%
99.9964% 8 6″
Safe Mode Safety Sensor
A safety sensor has been added to this unit to detect the proper angle of the Vray, and protect from accidental exposure of UV-C light. Equipped with this safety sensor, Vray can detect when there is danger of light being exposed towards the user. Safe mode is the default status when Vray is turned on. In sate mode, Vray will automatically turn off when tilted 30 degrees in either direction. For the user’s convenience, safe mode can also be turned off with the dick of a sensor button for 2 seconds. When safe mode is off, the light will stay on, even if Vray is held at an angle.
How to use
When using Vray in portable mode, the most effective distance to use is 2-8 inches from the item.
Safe Mode ON
- Push the power button for 2 seconds to turn the unit on. (Safe Mode is the default.)
- Set the timer you want. 5, 10, 15 minutes. Default time is 5 minutes.
- Place Vray over the area you wish to sanitize. (It will beep every 10 seconds during use.)
- After using, push the power button for approximately 2 seconds to turn off.
Safe Mode OFF
- Push the power button for 2 seconds to turn on.
- Push the safety button for 2 seconds to deactivate the safe mode. The light on the button turns off.
- Place Vray over the area you wish to sanitize. (It will beep every 10 seconds during use.)
- You can sanitize bulky items (desks, chairs, rugs, etc.)
- When you are done, push the safety button to activate the safe mode or push the power button more than 2 seconds to turn off.
Charging the Battery
- 1st Alarm of Low Battery: ‘Lo (Low battery)’ appears on the LED monitor and the power button turns red.
- 2nd Alarm of Low Battery: If the battery is running down after 1st alarm, the ‘Lo’ and red color on power button will blink.
- Charging: Beep to let you know the beginning of charging and the power button is red during charging.
- Charge Completion: Beep to let you know the finish and the light of power button is turned off.
- A single Vray, when placed on a surface, can sanitize an area 6″ to the left and 6″ to the right, measured from the center.
- To sanitize a wider area (shown above), move Vray 12″ center to center.
How to Change the UV Lamp
- Loosen the screws of the bracket both sides of the protection cover and lift it up by using both hands.
- Turn the lamp 90° to the right and remove. Insert a new lamp, and then turn 90° to the left.
- Cover the protection cover and tighten the screws.
- We highly recommend you use the Anti-shatter 8W UV-C Lamp provided by HamiltonBuhl PRIMETECH. Using another lamp may cause breakdown.
- Do not expose directly to eyes or skin. Overexposure of UVC induces skin erythema and keratoconjunctivitis.
- Koen using way in overtrand areas such as on tables, shelves, etc., please make sure children are not within UV-C ray range.
- Away i not waterproof product. is exposed to humidity or gets. wet, it may cause the unit to break down. Do not use with wet hands.
- When cleaning this product, Do NOT use water or chemicals.
- Please wipe gently with a soft cloth.
- Please charge the unit regularly, when not in use.
- Do not disassemble the Vray except to replace the UV lamp, when needed. Dissassembling the unit further will void the warranty.
FAQ
If Vray does not turn on:
- Lightly press the power button and hold for 2 seconds or more. This is part of a safety feature for children.
- Fully charge the unit and try again.
If the lamp doesn’t turn on:
- Please charge the unit.
- As a safety feature, the lamp will automatically turn off when the main body is tilted more than 30°.
- Try placing the unit on the floor, and try again.
If you hear a noise inside when you shake Vray:
- This sound is normal. The safety sensor makes that sound.
- There is an amalgam piece inside the lamp. This is normal.
REFRENCE LINK
https://hamiltonbuhl.com/store/p/9536-HygenX-Sanitary-Headphone-Covers-for-Over-Ear-Headsets-50-Pair
