BOSE Headphones II Around-Ear Wireless Manual
IMPORTANT SAFETY INSTRUCTIONS
Please read and keep all safety and use instructions.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance
This product conforms to all applicable Electromagnetic Compatibility Regulations 2016 and all other applicable UK regulations. The complete declaration of conformity can be found at:
www.Bose.com/compliance Bose Corporation hereby declares that this product is in compliance with the essential requirements per Radio Equipment Regulations 2017 and all other applicable UK regulations. The complete declaration of conformity can be found at: www.Bose.com/compliance
INSTRUCTIONS
- Do NOT use the headphones at a high volume for any extended period.
- To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
- Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
- Do NOT use your headphones while driving or at any time the inability to hear surrounding sounds may present a danger to yourself or others.
- Focus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the headphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
- Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
- Remove and disconnect immediately if you experience a warming sensation or loss of audio.
- Do NOT expose this apparatus to dripping or splashing, and do not place objects filled with liquids such as vases, on or
near the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Exposure to liquids may create a failure and/or fire hazard. - Do NOT submerge or expose for extended period to water, or wear while participating in water sports, i.e. swimming, waterskiing, surfing, etc.
REGULATORY INFORMATION
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3(B)/NMB-3(B)
Temperature range:
Operating: -4°F to 113°F (-20°C to 45°C)
Charging: 41°F to 104°F (5°C to 40°C)
- Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “8” is 2008 or 2018.
- China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, 1441 RG Purmerend, The Netherlands - Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan
- Phone Number: +886-2-2514 7676
- Mexico Importer: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec,
11000 México, D.F. Phone Number: +5255 (5202) 3545 - UK Importer: Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ, United Kingdom
LEGAL INFORMATION
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android, Google Play, and the Google Play logo are trademarks of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Bose Corporation is under license.
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
Bose Corporation Headquarters: 1-877-230-5639
©2021 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Features
- Unlock the full potential of your headphones.
- Free app compatible with most Apple and Android™ systems.
- Easily connect and switch between multiple Bluetooth® devices with a single swipe.
- Keep your headphones up-to-date with the latest software.
- Customize headphone settings, like voice prompt language and hibernation mode.
Charging the battery
- Plug the small end of the USB cable into the micro-USB connector on the right earcup.
- Plug the other end into a USB wall charger or computer that is powered on. Allow up to three hours to fully charge the battery. A full charge will power the headphones for up to 15 hours. A 15-minute partial charge will power the headphones for 2 hours.
Note: The headphones will not play while charging.
Battery indicator
The battery indicator is located on the right earcup. While the battery is charging, the battery indicator glows amber. When the battery is fully charged, the indicator glows green.
Note: While the headphone are in use, the battery indicator will blink red when the battery needs charging. See “Headphone status indicators” on page 17.
Pairing a mobile device
- Slide the Power/Bluetooth® button all the way up to the symbol and hold until you hear, “Ready to pair” or you see the Bluetooth indicator blinking blue.
- On your mobile device, make sure the Bluetooth feature is on. (The Bluetooth menu is usually found in the Settings menu.)
- Select Bose AE2 SoundLink from the device list.
You will hear, “Connected to ” or you will see the Bluetooth indicator glow solid white.
Note: Refer to your mobile device owner’s guide to learn more about how it pairs/ connects with other devices. - Repeat these steps to pair another device.
Using the back-up audio cable
Use the supplied back-up audio cable to connect a non-wireless device, or if the headphone battery is depleted. To use the audio cable:
- Plug the audio cable into the connector on the left earcup.
- Plug the audio cable into the connector on the device.
Note: Make sure is in the off position when using the back-up audio cable.
CARE AND MAINTENANCE
Battery care
- Be sure to turn off the headphones when not in use.
- Before storing the headphones for more than a few months, be sure the battery is fully charged.
- If the battery indicator begins to blink red while in use, the battery is low and you must charge the headphones now.
REFERENCE
https://www.bose.com/en_us/products/headphones.html
