Table of contents
show
Kepco RA 35-1 Rack Adapters User Manual
DESCRIPTION
The Kepco Models RA 35-1, RA 33-3, and RA 34-4 Rack Adapters are designed for the installation of Kepco PTR and OPS GROUP Ill Power Supplies into a standard 19-inch rack. The rack adapters are constructed as a single panel with (removable) handles, (4) elongated rack installation holes (standard 2½-inch hole distance) and predrilled holes for equipment mounting. An attached polyethylene bag contains the necessary mounting hardware. Refer to FIGS. 1 to 3 and to Table 1 for mounting instructions.
MODEL
RA 35-1
RA 33-3
RA 34-4
CAPACITY
1 UNIT
3 UNITS
4 UNITS
DIMENSIONS
HEIGHT
WIDTH
3%” (8.89 cm)
19″ (48.26 cm)
3%” (8.89 cm)
19″ (48.26 cm)
5%” (13.34 cm)
19″‘ (48.26 cm)
FIG.
- MODEL RA 35-1 RACK ADAPTER.
- MODEL RA 33-3 RACK ADAPTER.
- MODEL RA 34-4 RACK ADAPTER.
NOTE:
- Remove (2) cover-holding screws be- fore mounting unit. Unit is mounted with terminations facing right, as viewed from the front of the adapter.
- Mounting holes are offset from center of rack adapter. Mount units such that the chassis does not extend be- yond the height of the rack adapter.
- Mounts units such that the chassis side containing the power transistors faces to the right side, as viewed from the front of the rack adapter.
REFRENCE LINK
https://www.kepcopower.com/accspnl.htm
