Instant AP100 AIR PURIFIER User Manual

Instant AP100 AIR PURIFIER User Manual

SAFETY WARNINGS

Cleaning and Repair

• DO unplug the appliance from the power supply before cleaning.
• DO inspect the unit frequently. Dirt that has been collected should be removed regularly to prevent excessive accumulation that may result in flashover or fire.
• DO use appropriate personal protective equipment during cleaning and filter removal.
• DO NOT insert fingers or objects into the air outlet.
• DO NOT handle the unit with wet hands. Thoroughly dry your hands before handling any part of the air purifier.
• DO NOT immerse the air purifier in water or liquids, or clean the appliance with any liquid to avoid electric shock and/or electrical fires.
• The power supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
• DO NOT attempt to repair this device in any way or use any replacement components or parts to modify the air purifier. Doing so will void your warranty.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

NOTE
This appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device to prevent or clean up accidents with combustion processes and hazardous chemicals.

What’s in the box?

The power cord included is not shown
AP300 model is illustrated, it is representative of the overall features and accessories for models AP100, AP200, and AP300. Illustrations in this document are for reference only and may differ from the actual product. Always refer to the actual product.

What to expect

Your new Instant™ Air Purifier features an Advanced 3-in-1 filtration system and plasma ion technology working together to treat the air in a room area. Treated Air means the air that is cycled through the Instant™ Air Purifier. Welcome to cleaner air in minutes!

Advanced 3-in-1 Filtration System

Consists of:

• HEPA-13 filter, which captures 99.9% of dust, dander, pollen, allergens, and other ultrafine impurities in the air.
• The carbon layer in the filter helps reduce odors.
• The antimicrobial coating prevents bacterial growth on the filter and protects it against degradation.

Cleaner Air in Minutes
Operating at AHAM-verified clean air delivery rate (CADR)., AHAM is the Association of Household Appliance Manufacturers (AHAM). AHAM delivery rate is based on filtering pollen, tobacco smoke, and dust. It does not relate to viruses or bacteria.

Control panel

Getting started

1. Remove the air purifier from the box.
2. Remove the packaging material.
3. Turn the air purifier on its side and twist the bottom panel anti-clockwise to remove the panel.
4. Remove the filter and remove the plastic bag. Reinsert the filter.
5.  Replace the bottom panel, turning it clockwise to tighten.
6. Place the unit on the floor to ensure there’s clearance on all sides to allow for proper circulation.
7. Plug the electrical cord into an electrical outlet.
8. Touch the power button to turn the unit on. The unit powers up, measures the room’s air quality (as it does, counts down for 30 seconds), and begins cleaning the air.
9. The unit sets itself to Auto operation.

Using your air purifier

Turn on the unit

• If the unit is unplugged, plug the electrical cord into an electrical outlet.
• If the unit is plugged in but turned off, press the Power button until the display turns on.

Turn off the unit

• To stop the unit from operating, press the Power button, and the unit will turn off.

Automatic operation
There are 3 modes of operation: (1) Fan auto mode; (2) Night mode and (3) Eco mode. Our product software uses sensors to intelligently control the Instant™ Air Purifier. One sensor constantly monitors and reports air quality. Another sensor monitors ambient light.

Auto Mode
Fan auto mode adjusts fan speed up or down according to detected air quality.

• When the sensor detects air quality is good (white), Instant™ Air Purifier turns the fan to low with plasma ion technology on.
• When the sensor detects air quality fair (yellow), Instant™ Air Purifier turns the fan to medium with plasma ion technology on.
• When the sensor detects the air quality poor (red), Instant™ Air Purifier turns the fan to high with plasma ion technology on.

Economy or Eco Mode
If air quality is detected as good for 30 minutes, the Instant™ Air Purifier enters Economy or Eco Mode, meaning that the fan cycles on and off every 10 minutes. When the fan is on, it is measuring air quality. Eco Mode allows 50% energy reduction. (Energy Star certified).

• If the sensor detects air quality is good (white), Instant™ Air Purifier remains in eco mode with plasma ion technology on.
• If the sensor detects air quality is fair or poor, Instant™ Air Purifier exits eco mode and returns to Auto Mode.

Using your air purifier, cont.

Night Mode
Night Mode senses room lighting, turns the light off and turns the fan speed to low. You may set custom light levels, providing for dimmed light levels. If Night Mode is chosen, plasma ion technology is turned off for the quietest operation. Efficacy in removing viruses and bacteria is reduced. During Night mode, touch the LIGHT button to turn on the display

Fan speed
If you press FAN ICON, you can manually control the fan level: low, medium, or high.

• The lowest fan speed operates at a whisper-quiet level, less than 24 decibels.
• To return to Auto operation, touch the Auto button.

Light level
If you press the LIGHT ICON button, you can manually control the light level at 0%; 20%; 60%, and 100%. The light levels are pre-set at these levels:

You change the current light level manually.

• Press the LIGHT ICON button to cycle through the brightness levels: 0%, 20%, 60%, and 100%. The next time the unit switches to either Day or Night, the light level will change back to the pre-set level. You can customize the pre-set for Day or Night light levels.
• First, set the light level manually. Then press and hold the LIGHT ICON button for 3 seconds to save the current setting as the Day or Night light level.

Air quality

As it constantly monitors the air in the room, your air purifier shows your air quality in two ways:

Air quality indicator

• A sensor monitors the concentration of the mass of particulates in the air. (ug per cubic meter). Also, known as PM2.5 sensor.
• If you press the INFO Button on an AP200 or AP300 model, you can switch between the air quality measurement (ug per cubic meter) or the % of good air quality based on the US air quality index.
  
• AP100 models Colour Indicator: white, yellow, red.
• AP200 models Colour Indicator and % of the cleaner air measured (based on particulates detected by the Sensor, which is translated to a % of good air quality as defined above).
• AP300 models Colour Indicator and % of the cleaner air measured (based on particulates detected by the Sensor, which is translated to a % of good air quality as defined above).

Caring for your air purifier

Cleaning the unit

• To remove dust, lightly wipe the unit with a soft, clean cloth.
• If needed, wipe the unit with a clean damp cloth, then immediately dry with a clean dry cloth.
• DO NOT immerse the unit in water.

Replacing the filter
Visit www.instantpot.com.au to locate a retailer to purchase compatible filters, designed to work with your unit. Use appropriate personal protective equipment during filter removal.

1. Unplug the air purifier from the electrical outlet.
2. Turn the air purifier on its side and twist the bottom panel anti-clockwise to remove the panel.
3. Remove the old filter and dispose of it properly. The filter is not recyclable.
4. Remove the new filter from its packaging and insert it into the air purifier.
5. Replace the bottom panel, turning it clockwise to tighten.
6. Place the air purifier on the floor again and plug it back into the electrical outlet.
7. The air purifier will automatically begin cleaning the air again.

Cleaning the sensor*
Clean the dust sensor every two months to keep your air purifier operating efficiently.

1. Open the Sensor Access Panel on the rear of the unit.
2. Clean any dust collected on the sponge.
3. Close the Sensor Access Panel.

Warranty

Limited Warranty
This Limited Warranty is issued by Corelle Brands (Australia) Pty Ltd (Corelle Brands Australia) and is effective for one year from the date of the original consumer purchase. Proof of the original purchase date and return of your appliance is required to obtain service under this Limited. Return of your appliance to us will be done in accordance with our instructions only.

Provided that this appliance is operated and maintained in accordance with written operating instructions attached to or furnished with the appliance or published operating instructions on www.instantpot.com.au, Corelle Brands Australia will, in its sole and exclusive discretion, either: (i) repair defects in materials or workmanship; or (ii) replace the appliance. In the event that your appliance is replaced, the Limited Warranty on the replacement appliance will expire 12 months from the date of the original consumer purchase. We remind you the appliance you purchased is for personal use only (not commercial use).

Any modification/alteration or attempted modification/alteration to your appliance will void this Limited Warranty unless such modification/alteration or attempted modification/alteration was expressly authorized by a Corelle Brands Australia Representative in writing.  This Limited Warranty only covers Corelle Brands Australia’s appliances/products and is not extended to any other appliances, products, equipment, components, or devices that you use or may use in conjunction with Corelle Brands Australia’s appliances. To claim under this Limited Warranty:

1. Contact Corelle Brands Australia at: 9C Commercial Road, Kingsgrove, NSW, 2208 Email: sales.australia@corellebrands.com
2. Provide a description of the appliance you believe has malfunctioned due to defective parts or workmanship.

Limitation and Exclusions

To the maximum extent permitted by law, the maximum liability of Corelle Brands Australia, if any, for any allegedly defective appliance or part shall in no circumstances exceed the purchase price of a comparable replacement appliance or part of the same age.

This Limited Warranty does not cover

1. Damage resulting from accident, modification/alteration (unless expressly authorized by a Corelle Brands Australia Representative in writing), misuse, abuse, neglect, unreasonable use, use contrary to the written operating instructions attached to or furnished with the appliance or published operating instructions on www.instantpot.com.au, normal wear, and tear, commercial use, improper assembly by you or anyone, disassembly by you or anyone, repair by you or anyone, failure to provide reasonable and necessary maintenance, force majeure event including but not limited to fire, flood, acts of God;
2. Repairs where your appliance is used for other than normal, personal use or when it is used in a manner that is contrary to the written operating instructions attached to or furnished with the appliance or published operating instructions on www.instantpot.com.au; or
3. Use of unauthorized parts and accessories, or repairs to parts and systems resulting from unauthorized repairs or modifications/alterations made to your appliance.

REFERENCE LINK

https://instantpot.com.au/portfolio-item/air-purifier-ap100-small/

Download PDF

Instant AP100 AIR PURIFIER