Honeywell RPWL400W2000 Doorbell User Manual
Features
- Works with Honeywell Series 3, 5, and 9 Wireless Doorbells
- Wireless “E” compatibility
- Feedback LED
- Weather Resistant
- Available in black or white
- Surface mount
- Up to 2-year battery life
- Battery included (CR2032)
- Individually coded signal avoids interference with other users
- Honeywell ActivLink
- Includes mounting kit: screws, mounting bracket and adhesive strip
Accessory Push Button
Connect to Doorbell
Press and hold the Setting button on the doorbell for three seconds.
Within 12 seconds, select a tune and light color (if available).
Product information
About this item
- Works with Honeywell Home Series 3, 4, 5, and 9 Wireless Doorbells.
- Easy to install surface mount push button requires no tools, no wires, no fuss – it’s ready to use within minutes.
- The RPWL400W Wireless Doorbell Push Button is equipped with a weather-resistant exterior to maximize its durability and longevity.
- The push button illuminates a halo light when pressed, providing feedback so your visitors know the bell has rung.
- Install it anywhere – the Wireless Doorbell Push Button has a battery life of up to 2 years and includes multiple mounting options for installation.
- Individually coded signal avoids interference with other users.
- Includes mounting kit: screws, mounting bracket, and adhesive strip.
Note:
Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Easy install, ready to use in minutes
A wireless doorbell push button doesn’t get any easier than this. No tools, no wires, no fuss – it’s ready to use within minutes. The halo light activates when pushed for ambient feedback. It’s weather resistant and comes with a battery.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
Such modifications could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 millimeters between the radiator and your body.
IC Regulations
CAN ICES-3(B)/ NMB-3(B) This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 millimeters between the radiator and your body. The operation of this equipment is subject to the following two conditions: (1) this equipment or device may not cause harmful interference, and (2) this equipment or device must accept any interference, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
- this equipment or device may not cause harmful interference,
- this equipment or device must accept any interference, including interference that may cause undesired operation.
2023 Resideo Technologies, Inc. All rights reserved. The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates. Tous droits réservés. La marque de commerce Honeywell Home est utilisée avec l’autorisation d’Honeywell International, Inc. Ce produit est fabriqué par Resideo Technologies, Inc. et ses sociétés affiliées.
