featured Jabra A120s Bluetooth Music Adapter User Manual prduct img

Jabra A120s Bluetooth Music Adapter User Manual

Jabra-logo

Jabra A120s Bluetooth Music Adapter User Manual

Jabra A120s Bluetooth Music Adapter User Manual prduct img

Thank you
Thank you for purchasing the Jabra A120s Bluetooth® music adapter. We hope you enjoy it! You will discover a new way of enjoying your music – wirelessly! This instruction manual will get you started and ready to make the most of your adapter.

About your Jabra A120s

  1. Light indicator (LED) and multi-function button
  2. Charging socket
  3. 3.5mm audio jack

Jabra A120s Bluetooth Music Adapter User Manual fig 1

What your Jabra A120s can do

Your Jabra A120s is designed to work with any Jabra Bluetooth stereo headset such as the Jabra BT620s. The adapter connects to most audio sources such as portable MP3 players, handheld gaming devices, computers, etc. via a standard 3.5mm audio connector

Specifications:

  • Up to 10 hours of music – standby time up to 240 hours
  • Rechargeable battery with charging option from AC power supply (not included in the pack), PC via USB cable or car charger (car charger not included)
  • Weight ½ ounce (14 grams)
  • Operating range up to 33 feet (10 meters)
  • Advanced Audio (A2DP)5, Remote Control (AVRCP)6
  • Bluetooth1 specification 1.2

What’s in the pack?

  • Jabra A120s Bluetooth music adapter
  • USB charger for charging from any PC or laptop
  • Velcro tape for fixing the adapter to the back of the music player
  • User manual

Getting started

The Jabra A120s is easy to operate. The multi-function button performs different functions depending on how long you press them:

Instruction:Duration of press:
Tap Press

Press and hold

Press briefly and let go Approx: 1 second

Approx: 5 seconds

Charging your Jabra A120s
Make sure that your Jabra A120s is fully charged for 2 hours before you start using it. Use only the chargers provided in the box or Jabra-approved chargers such as the Jabra BT620s AC charger – do not use chargers from any other devices as this might damage your Jabra A120s. When the indicator light is solid red, your music adapter is charging. When the light turns green, the adapter is fully charged.

Pairing3 with a headset or other device

Before you use your Jabra A125s you must pair it with a Bluetooth headset or headphone

  1. Make sure the headset and Jabra A120s are turned off.
    • Put the headset into pairing mode:
      Refer to your headset’s manual for pairing mode instructions, if you are pairing
      with the Jabra BT620s:
    • Press and hold the answer/end button until the LED is solid blue.
  2. Put your Jabra A120s in pairing mode
    •  Press and hold the multi-function button until the LED light is solid blue
  3. Connect your Jabra A120s to your iPod via the dock connector.

Using the Jabra A120s

Start playing music

  • Make sure that your headset is turned on before turning on the music adapter. The music adapter will then connect automatically to your headset.

Pause (Mute) music

  • Tap the button on the music adapter or use your headset’s play/pause button.
  • Repeat the above to resume the music playing on the headset.

If you lose the connection between the Jabra A120s and your headset:

  • Tap the button on the music adapter. (Make sure that the headset is switched on.)

What the lights mean

What you seeStatus
Solid redCharging
Flashing redLow battery
Solid greenFully charged
Solid bluePairing mode
Soft flashing blue (every 3 sec)Streaming connection is established
Flashing rapidly blueSearching for devices

Troubleshooting and FAQ

Please see the headset’s manual for further information regarding the headset. I hear crackling noises Bluetooth is a radio technology which means it is sensitive to objects between the headset and the device it is connected to. You should be able to have 10 meters (33 feet) of distance between the headset and the connected device when there are no major objects in the way (Walls etc.)

I cannot hear anything in the headset Increase the volume in the headset and on the music player. Ensure that the headset is paired to a device that is playing. Make sure that music is playing on the audio device. I have pairing problems Ensure that both devices are fully charged and repeat all mentioned steps under pairing.

Need more help? 
Jabra offers customer support online at www.jabra.com or you can see the inside cover for the support details for your country.

Certification and safety approvals

FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Jabra will void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The user must place the base 8” (20cm) or more from any personnel in order to comply with FCC RF exposure requirements

CE

This product is CE-marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, GN Netcom, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.jabra.com Within the EU this device is intended to be used in Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and Switzerland.

Bluetooth
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom is under license. Other trademarks and trade names are those of their respective owners.

Taking care of your music adapter

  • Always store the Jabra A125s with the power off and safely protected.
  • Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.
  • Do not expose the Jabra A125s to rain or other liquids.

Warranty

Jabra (GN Netcom) warrants this product against all defects in material and workmanship for a period of two years from the date of the original purchase. The conditions of this warranty and our responsibilities under this warranty are as follows:

  • The warranty is limited to the original purchaser
  • copy of your receipt or other proof of purchase is required.
  • The warranty is void if the serial number, date code label, or product label is removed, or if the product has been subject to physical abuse, improper installation, modification, or repair by unauthorized third parties
  • The responsibility of Jabra (GN Netcom) products shall be limited to the repair or replacement of the product at its sole discretion
  • Any implied warranty on Jabra (GN Netcom) products is limited to two years from the date of purchase on all parts, including any cords and connectors
  • Specifically exempt from any warranty are limited-life consumable components subject to normal wear and tear, such as microphone windscreens, ear cushions, decorative finishes, batteries, and other accessories
  • Jabra (GN Netcom) is not liable for any incidental or consequential damages arising from the use or misuse of any Jabra (GN Netcom) product
  • This warranty gives you specific rights and you may have other rights which vary from area to area.
  • Unless otherwise instructed in the User Manual, the user may not, under any circumstances, attempt to perform service, adjustments, or repairs on this unit, whether in or out of warranty. It must be returned to the purchase point, factory, or authorized service agency for all such work
  • Jabra (GN Netcom) will not assume any responsibility for any loss or damage incurred in shipping. Any repair work on Jabra (GN Netcom) products by unauthorized third parties voids any warranty

Glossary

Bluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 10 meters). Get more information at www.bluetooth.com

Bluetooth profiles are the different ways that Bluetooth devices communicate with other devices. Bluetooth phones support either the headset profile, the hands-free profile, or both. In order to support a certain profile, a phone manufacturer must implement certain mandatory features within the phone’s software.

Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired.

Standby mode is when the Jabra A125s is on but not connected to a headset.

A2DP (Advanced Audio Distribution Profile) is a Bluetooth Profile that enables stereo sound. Both the adapter and the device it connects to must support A2DP in order to hear A2DP sound in the headset.

AVRCP (Audio Video Remote Control Profile) is a Bluetooth profile that enables remote control of the device that the headset is connected to. Both the headset and the device it connects to must support AVRCP in order for AVRCP to work.

Dispose of the product according to local standards and regulations. www.jabra.com/weee

REFERENCE LINK

https://adcombhs.com/shopsite_sc/store/html/jabra_a120s_bluetooth_music_adapter.html

DOWNLOAD LINK

Jabra A120s Bluetooth Music Adapter User Manual

Leave a Reply