Table of contents
show
AmazonBasics AB-LB102 Wall Mount Push Button Key Storage Lock Box Guide
OVERVIEW
Caution
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.
- Make Sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, please contact a professional installer for assistance.
Notice
The default combination is 0-0-0. To change the combination, follow the steps below.
- Step 1: Open the Dust Cover (A) to reveal the Opening Lever (B), Push buttons (C), and Clear Button (D). There is no pre-set combination, push the Clear Button (D)and pull down the Opening Lever (B) to open the Front Door (E).
- Step 2: Open the door by using the method above to reveal the setting dials on the back of the door.
- Step 3: Remove the yellow setting key (G). Choose a combination and write it down before setting the lock (Each button can be used once only).
- Step 4: Each Yellow Dial (F) has an “On” and “Off” setting using a dial that can be rotated 180 ° by using the setting key. Test the combination before closing the lid. After setting, the “Opening Lever (B)” can not be pressed down to be locked.
NOTICE Enter your combination to test the function.- Press down the “Clear Button (D)”, and then enter your combination.
- Press down the “Open Button” and pull the door close.
- Step 5: Return the yellow setting key to the original position for future use.
- Step 6: Wall Mounting: Choose a mounting location. (We recommend a discrete location away from direct view). Open the Dust Cover (A) and lock the door using your combination. Position the lock in the desired position.
- Step 7: Use a spirit level to ensure the lock is mounted straight & vertically. Mark the position of the screw holes on the desired surface.
- Step 8: Remove the lock drill holes and fit wall plugs. Insert and tighten screws. Always use the front cover if mounted in an outdoor position.
