Table of contents
show
CIDOO ABM641 Electrophoretic Keyboard
Product Features
- Aluminum with electrophoretic finish.
- Fully modular &hot swap : compatible with 3- pin and 5- pin switch
- Custom-made stabilizer provides a unique typing sound profile.
- Strong and flexible fiberglass resists deformation .
- Double EVA insulation layer.
- USB Cable: Utilizes USB-C removable cable.
- Switch Type : Gateron G PRO Yellow Switch
- Кеусар : PBT Dye sublimation keycap
- Bluetooth 5.0/USB-C dual mode.
- .Static and animated GB lighting effects.
- . Come with powerful musical rhythm software.
- 12.2000 mA Rechargeable lithium battery.
- Product dimensions: 296.7*114.2*42.5 +0.5mm
- Product weight: 11889+10g
- Product color : Yellow , White
- Current /Voltage: 5V ~ 300mA
- Executive Standard: GB/T14081-2010
- Package includes: ABM641, Cable, User manual, Keycap and switch tool.
Toggle vied Bluetooth mode :
FNER ‘CAPS CIRL WIN’ total 3 keys backlight will flash write 3 times when pressing Not
Bluetooth@ Pairing Instructions
- Set switch on the back of the keyboard to the” ON” position. To make sure the keyboard is under Bluetooth mode.
- Press and hold the FN and Q / W / E keys for 5 seconds. The “R” key LED will begin to flash repeatedly to indicate that the keyboard is ready to connect to a new device over Bluetooth . Open the Bluetooth settings on your device and scan for available devices. Locate and select the * CIDOO ABM641 ” entry.
- Once the keyboard has connected to your device, the “R” key will cease flashing indicating that Bluetooth pairing was successful,
- The keyboard can support Bluetooth connections for up to 3 devices . Long press FN and Q / W / E to set up a connection to a new device. Short press to connect t^ э novenas strode Dovie.
Auto sleep mode
After 5 minutes without a keypress the backlighting will turn off to conserve battery. After 30 minutes, the keyboard will enter standby mode and disconnect from Bluetooth, Any keypress will reconnect the keyboard,
Battery Charging:
FN key will blink repeatedly when the keyboard is low on battery.
Custom Backlighting Mode Instructions:
- Press FN+Z/X/C (Each key can store a custom backlight mode).
- Press FN+ Tab – (The CapsLK ,CtrI, Win key LED will flash white repeatedly to indicate recording).
- Press the keys that you wish to set the backlighting for.
- Press FN+ Tab to save exit the custom backlighting mode
FN combination keys
(FN+ left Ctri to switch function mode, “Ctri” key led will change to white color after pressing FN+ left Ctrl)
For software download, pls visit website :WWW.CID000.COM
Download Pdf Link
https://epomaker.com/cdn/shop/files/ABM641_manual.pdf?v=252801811080907210
