MONSTER Abra A5 V19.1 Gaming Laptop User Manual
Product Specification
This User’s Manual provides technical information of instructions and illustrations on how to operate this notebook for the customer. Please read this manual carefully before using this notebook.
| Dimension 359.37* 244.22 * 27.35 mm Weight 2.1kg± 5% | |
| Processor – CPU | |
| Support Processor | i5-12500H |
| Graphic Card – GPU | |
| Graphic Card | 4 GB GTX 1650 |
| Memory | |
| DDR4 | DDR4 3200MHz |
| Display | |
| LCD | 15.6” 1920×1080,IPS/45% 144Hz |
| I/O Port | |
| DC-in | x 1 |
| USB | x2: USB 3.1 (Gen1) |
| x1: USB 3.1 (Gen2) | |
| x1 USB 3.1 (Gen2) + DP1.4 | |
| I/O Port | |
| RJ45 HDMI 2.1 Audio out & Mic in | x 1 x 1 x 1 |
| Audio | |
| Audio Codec Speaker/Mıc | Codec: CX11800 Azalia standard support, D3 mode support Build-in 2 speakers *Speaker : 2W/each *Digitial Microphone support |
| Input | |
| Keyboard Pointing Device | Single Zone TDA1470 (114.5*70*0.8mm), TP mylar, Enable/Disable area :10mmx10mm Palm Rejection: Support Controller IC change to 1836, support Windows update |
| Communication Port | |
| LAN | *Supports 10/100/1000/2500 Mb/sec |
| *PCI-E interface | |
| *Power Down Mode D1~D3 support | |
| *PCIe ASPM L1.1, L1.2 support | |
| *UI for network package management | |
| Wireless LAN +BT | INTEL AX201 |
| Webcam | |
| Webcam | HD webcam with D-MIC*1, 4mm |
| Power | |
| AC Adapter | Automatics Voltage adjustment between 100 and 240VAC 50/60Hz |
| 150 Watts (19V/7.89A) or (20V/7.5A), 3 Pins | |
| Battery | Li- polymer Battery, SW Gas Gauge IC, soft pack |
| 3 cells (3s1p 4100mAh) 46.74Wh (default) | |
About Bios Setup
When To Use Bios Setup?
You may need to run the BIOS Setup when:
- An error message appears on the screen during the system booting up and is requested to run
- You want to change the default settings for customized
- You want to reload the default BIOS
How to Run BIOS Setup ?
To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
If the message disappears before you respond and you still wish to enter Setup, either restart the system by turning it OFF and ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this chapter are for your references only. The actual setting screens and options on your Notebook may be different because of BIOS update.
The setup function only can be invoked by pressing [Del] or [F2] key during POST that provide a approach to change some setting and configuration the user prefer, and the changed values will save in the NVRAM and will take effect after the system rebooted. The setup uses a menu interface to allow the user to configure their system and the features are briefly listed as follow.
