Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-FEATURED-img

Shark Freestyle AG 9613 QUARTZ ANALOG USER MANUAL

Views: 106
Table of contents show

Shark Freestyle logo

Shark Freestyle AG 9613 QUARTZ ANALOG USER MANUAL

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-prduct-img

TWO-HAND / THREE-HAND MODELS

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-1

TO SET THE TIME:

  1. Pull the crown out to first click position B.
  2. Turn the crown to set time.
  3. Push the crown back to position A

TWO-HAND / THREE-HAND DATE MODELS

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-2

TO SET THE TIME:

  1. Pull the crown out to second click position C.
  2. Turn the crown to set time.
  3. Push the crown back to position A

TO SET THE DATE:

  1. Pull the crown out to first click position B.
  2. Turn the crown counterclockwise to set the date.
  3. Push the crown back to position A.

NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date, and then reset to the correct time.

THREE-HAND DAY-DATE MODELS

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-3

  1. Day (of the week) Indicator
  2. Date Indicator

TO SET THE TIME:

  1. Pull the crown out to second click position C.
  2. Turn the crown to set time.
  3.  Push the crown back to position A.
TO SET THE DAY (OF THE WEEK):
  1. Pull the crown out to first click position B.
  2. Turn the crown clockwise to set the day.
  3. Push the crown back to position A.

NOTE: Do not set the day between 9:00 P.M. and 1:00 A.M. Otherwise, the day may not change properly on the following day. If it is necessary to set the day during that time period, first change the time to any time outside it, then set the day and then reset to the correct time.

TO SET THE DATE:

  1. Pull the crown out to first click position B.
  2. Turn the crown counter-clockwise to set the date.
  3. Push the crown back to position A.

NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date, and then reset to the correct time.

TWO-EYE MULTI-FUNCTION MODELS

TWO-EYE MULTI-FUNCTION MODELS

  1. Second Hand
  2. Day Hand
  3. Date Hand

TO SET THE DAY (OF THE WEEK)

  1. Pull the crown out to second click position C.
  2. Turn the crown clockwise to set the day.
  3. Push the crown back to position A.

NOTE: The Day Hand will move together with the Hour Hand and Minute Hand. Keep turning the crown until the desired day has been reached.

TO SET THE TIME:

  1. Pull the crown out to second click position C.
  2. Turn the crown to set time.
  3. Push the crown back to position A.

TO SET THE DATE:

  1. Pull the crown out to first click position B.
  2. Turn the crown counterclockwise to set the date.
  3. Push the crown back to position A.

NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date, and then reset to the correct time

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-5

  1. Second Hand
  2. Date Hand
  3. 24 Hour Hand

TO SET THE TIME:

  1. Pull the crown out to second click position C.
  2. Turn the crown to set time.
  3. Push the crown back to position A.

TO SET THE DATE:

  1. Pull the crown out to first click position B.
  2. Turn the crown counterclockwise to set the date.
  3. Push the crown back to position A.

NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date, and then reset to the correct time

THREE-EYE MULTI-FUNCTION MODELS

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-6

  1. Hour Hand
  2. Minute Hand
  3. Second Hand
  4. Date Hand
  5. Day Hand
  6. 24 Hour Hand
TO SET THE DAY (OF THE WEEK):
  1. Pull the crown out to first click position B.
  2. Turn the crown clockwise to set the day.
  3. Push the crown back to position A.

NOTE: Do not set the day between 9:00 P.M. and 1:00 A.M. Otherwise, the day may not change properly on the following day. If it is necessary to set the day during that time period, first change the time to any time outside it, then set the day and then reset to the correct time.

TO SET THE DATE:

  1. Pull the crown out to first click position B.
  2. Turn the crown counter-clockwise to set the date.
  3. Push the crown back to position A.

NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date, and then reset to the correct time.

THREE-EYE CHRONOGRAPH MODELS

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-7

  1. Hour Hand
  2. Minute Hand 3. Second Hand
  3. 24 Hour Hand
  4. Chronograph Minute Hand
  5. Chronograph Second Hand
  6. Date Indicator
  • S1 – Chronograph start/stop button
  • S2 – Chronograph reset button

TO ADJUST THE CHRONOGRAPH HANDS POSITION:

Before setting the time, check if the Chronograph Second Hand and Chronograph Minute Hand are at the 12 o’clock position. If the chronograph is in use, press the button in the following order to reset it, and then check if the chronograph hands have returned to the 12 o’clock position.

  • If the chronograph is counting: S1 S2
  • If the chronograph is stopped: S2

In case one or several chronograph hands are not at the zero position due to certain reasons (e.g. following a battery change), that needs to be adjusted.

  1. Pull the crown out to second click position C.
  2. Press the S1 button to set the Chronograph Second Hand. Holding down the button will allow quick advance.
  3. Push the crown back to position A

TO USE THE CHRONOGRAPH (STOPWATCH):

  1. Press the S1 button to start counting.
  2. To stop counting, press the S1 button once. Press the S1 button again to resume from where it left off.
  3. To reset to zero, press the S1 button to stop counting, and then press the S2 button

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-8

  1. Hour Hand
  2. Minute Hand
  3. Second Hand
  4. 24 Hour Hand
  5. Chronograph Minute Hand
  6. Chronograph Second Hand
  7. Calendar

TO ADJUST THE CHRONOGRAPH HANDS POSITION:

Before setting the time, check if the Chronograph Second Hand and Chronograph Minute Hand are at the 12 o’clock position. If the chronograph is in use, press the button in the following order to reset it, and then check if the chronograph hands have returned to the 12 o’clock position.

  • If the chronograph is counting: S1 S2
  • If the chronograph is stopped: S2
  • If the split time is displayed: S2 S1 S2

In case one or several chronograph hands are not at the 12 o’clock position due to certain reasons (e.g. following a battery change), that needs to be adjusted

  1. Pull the crown out to second click position C.
  2. Press the S1 or S2 button to set the Chronograph Second Hand and Chronograph Minute Hand (mechanically coupled). By pressing the S1 or S2 button, the hands will move counterclockwise or clockwise respectively.
  3. Push the crown back to position A.

TO USE THE BACKLIGHT:

Shark-Freestyle-AG-9613-QUARTZ-ANALOG-USER-MANUAL-fig-9

Some watch models are equipped with an electroluminescence (EL) backlight. To turn on the backlight, press the backlight button. If there is no separate backlight button, press the crown to activate the backlight.

SCREW-DOWN CROWN
Some watch models are equipped with a screw-down crown. Make sure to unscrew the crown before pulling out the crown for setting, then screw the crown back in tightly after setting to avoid any water entry.

To use the compass

The red pointer of the compass represents the direction of magnetic North (N). With reference to the red pointer, you can then locate the directions of East, South, and West. DISCLAIMER – The compass should not be relied upon to determine precise location, proximity, distance, or direction. In addition, some areas have more magnetic interference than others. This interference may result in further distortion of the compass reading. This compass is designed to point to magnetic north, not true north. Please take into consideration the level of declination based on your global position

REFERENCE LINK

https://www.freestyleusa.com/

Tags: , , , ,

Leave a Reply