Table of contents
show
Monster Airmars XKT11 Bluetooth Wireless Earphones Manual
Product parameters
- Transmission distance: 10m
- Driver diameter: Φ13mm
- Driver impedance: 32Ω±15%
- Sensitivity: 106±3.0dB
- Frequency response range: 20Hz-20kHz
- Battery capacity(Charging case): 3.7V 300mAh
- Battery capacity(Headphone): 3.7V 35mAh
- Charging time(Charging case): ≈1.5 hours
- Music playtime(Headphone): ≈4 hours
- Music playtime with charging case: ≈17 hours
Product Schematic Description
Charge the charging case
Connect the charging case to the 5V power adapter with a Type-C charging cable.
- Rated input: 5V 30mA(Headphone)
- Rated input: 5V 300mA(Charging case)
TIPS:
When the charging case is closed and the LED flashes red, pls charge the charging case.
Indicator Guide
Product operating instructions
Power on
- Method 1: Restore factory settings Open the charging case, and the headphones will turn on automatically.
- Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones.
Power off
- Method 1: Put the headphones into the charging case and close the cover.
- Method 2: When the headphones are not connected to the Bluetooth device long touch the MF button of the headphones for 6s to turn off the headphones.
- Method 3: After disconnecting from the Bluetooth device for 3 minutes.
Pairing
- Step one: Open the charging case, and the headphones will start pairing automatically.
- Step two: Search and click for” Monster Airmars XKT11” on the Bluetooth list of the smart device, and when the connection is successful,” Connected” will be heard.
* Headphones will try reconnecting to the device within 3 minutes when the connection is lost.
NOTE:
- Fully charge the headphones and power off before an intended not-in-use period.
- Unplug the charging cable after charging.
Operation
Normal
Music playback
Restore factory settings
Headphones are not connected to the Bluetooth version device when turned on, click the MFB 5 times to clear the previous pairing information and repair again.
Precautions
- Headphones will turn on automatically needless to press any outong pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
- Charging every 15 days will extend battery life when not in use often, Cleaning off dirt on the charging contacts with cotton swabs with alcohol will maintain good contact for charging.
- Keep the battery (battery pack) away from inflammable or excessive heat such as direct sunlight.
Warnings
- Do not use Heacopones at high volume for an extended period of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise, the warranty will be voided
- Keep headphones away from an impact or vibration,
- Do not use any chemical solvents or cleaning agents on the headphones.
