Table of contents
show
Anfier M6 Translator Earbuds User Manual
Important Instructions
- Do not use unofficially recommended charging methods to avoid fire, explosion, or other dangers.
- Do not deliberately drop, burn, penetrate, squeeze or immerse in liquid to avoid product damage.
- Do not expose to high temperatures or around heating equipment such as microwaves or ovens.
- Use the device within the range of 0℃ ~ 35℃ and store within the range of -20℃ ~ 45℃. If the temperature is too high or too low, it will cause the device to malfunction.
- We are not responsible for quality issues, product failures, and safety accidents caused by the use of unofficial approved accessories.
Product Introduction
In the Box
- Left×1 Right×1
- Warranty Card & Specification×1
- Charging case×1
- Charger cable×1
Turn ON/OFF
Take out both M6 earbuds and it will automatically turn on. During the boot process, you will hear voice prompts such as “POWER ON”, “PRIMARY/SECONDARY” and “YOU HEADSET IS CONNECTED”. When the earbuds place in the charging case, it will automatically turn off.
Bluetooth Pairing
- Take out both M6 earbuds
Turn on Bluetooth, choose “WAS-M6” for pairing.
Turn on Bluetooth, choose “WAS-M6” for pairing.
Translations
- Search and download the “WasTrans” app in the App Store/Google Play. You may also scan the QR code to download
- Open the app and allow the permissions for the proper use of the device.
- Turn on Bluetooth, choose “WAS-M6” for pairing. After the connection is successful, you may choose one of two different modes: Touch Mode and Speaker mode.’
Touch Mode
- Make sure that the Bluetooth of the mobile phone has been connected to WAS-M6.
- Give one of the earbuds to the other.
- Start the “WasTrans” app. When you hear a continuous beep, it means that the “WasTrans” app has been connected with WAS-M6
- Choose the language of the left and right earbuds.
- Tap one side of the earbuds to speak continuously, and both earbuds can hear simultaneous interpretation. If the other side wants to speak, tap his or her earbuds to start speaking. To end the translations, just touch the earbud again. Or set it to end translation automatically in the APP. The default is to automatically end translation.
Speak out with phone’s speaker
Only one person wears earbud, the other communicate via the mobile phone. Suitable for short conversation with strangers that are inconvenient to wear your earbud.
- Make sure that the Bluetooth of the mobile phone has been connected to WAS-M6.
- Start the “WasTrans” app. When you hear a continuous beep, it means that the “WasTrans” app has been connected with WAS-M6.
- Choose “Speaker Mode” from the menu.
- Choose the language of the earbuds and mobile phone.
- Tap the earbuds (or click the lower half of the phone screen) to start speaking, the mobile phone speaker will play the translations; Tap the top half of the phone screen, the other person starts speaking to the phone, and your earbud will hear the translations.
Common Functions
Make phone calls
- Answer: Tap the earbuds on the left or right side
- Hang up: Tap the earbuds again on the left or right side
- Reject: Tap 2 times on the left or right earbuds
Listen to music
- Play/Pause: Tap the earbuds on the left or right side
- Last: Tap 2 times on the left earbuds
- Next: Tap 2 times on the right earbud
Voice assistant
- Start the voice service: Long touch the earbuds on the left or right side
- Stop the voice service: Long touch the earbuds on the left or right side again
LED Indications (Charging Case)
- When the earbuds are charging, the indicator light of charging case display.
- When charging, the indicator light of charging case display.
- Press the button to check the battery capacity.
FAQS
How well do translator earbuds work?
This will likely cause a problem if you’re looking for a conversation or situation with nuance. Suffice to say, they’re not going to translate a university lecture well or help you have a debate with someone.
What earbuds have real time translation?
Translate with Google Pixel Buds. Whether you travel abroad or connect with multilingual friends and family, Google Pixel Buds help you translate easily with your Pixel or Android 6.0+ phone.
Can you answer calls on earbuds?
When your Galaxy earbuds are connected to your phone, you can answer and control calls without picking up your phone.
How to use Bluetooth translator?
Follow the instructions in the screen. Turn on the Bluetooth translator. Turn on the Bluetooth select woosk and agree to connect.
How fast do earbuds charge?
Earbuds: about 1.5 hours. Charging case: A full charge takes up to 2 hours with a USB-C cable and 3-4 hours with a wireless charger.
Can I charge my earbuds without the case?
One of the simplest ways to charge your earbuds without the charging case is by using a USB cable. Many wireless earbuds have a small port, usually a micro-USB or USB-C, that can be used for direct charging.
How to reset AirPods?
AirPods 1, 2, or 3, or AirPods Pro (all generations): Put the AirPods in their case, close the lid, then wait 30 seconds.
How to connect earbuds to phone?
Between what you’re trying to pair and the headphones themselves. Don’t leave the case shut.
How long should I charge my earbuds for the first time?
When charging the battery for the first time, or when the battery is completely discharged, the earbuds require at least 10 minutes of charging time to turn on.
DOWNLOAD PDF
f7224f9b4c646b9ffdd86a079b56eec45cb6123278881064b79af1b604191dc1_optim