Oontz Angle 3 Waterproof Portable Bluetooth Speaker User Manual

Oontz Angle 3 Waterproof Portable Bluetooth Speaker User Manual

In the Package

Buttons

Important

• The volume control on your device and the speaker work independently of each other.
• To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.
• Some apps may not support track back, track forward, or play/pause

Lights

Connectors & Built-in Mic

Attaching the Lanyard

• Slide the smaller lanyard loop through one of the lanyard attachment holes at the top of the speaker
• Slide the larger lanyard loop through the smaller lanyard loop that has passed though the other attachment hole
• The lanyard is not for use by children under 6 years of age. Small parts can present a choking hazard.
• Pull the larger lanyard loop completely through the smaller lanyard loop to fasten the lanyard to the speaker

Battery Features

• The rechargeable battery comes with a partial charge and the speaker is ready to play.
• For maximum playtime, fully charge the battery.
• You can play while charging.

Low Charge Remaining

• When the battery charge has less than 15% remaining the Red Light will begin flashing rapidly.
• The volume will decrease to preserve the remaining battery charge.

Music Play Time

Up to 14 hours on a full charge, at 2/3 volume. Louder volumes will reduce the battery play time.

Power Saving Feature

• When playing from battery power the OontZ Angle 3 Shower – PLUS Edition will turn offafter 30 minutes of not playing audio to conserve the battery charge. *
• When plugged into a charging source the OontZ Angle 3 Shower – Plus Edition will remain on until you turn the power off.
• You can continue to keep the speaker plugged into a charging source even when it is fully charged, keeping the speaker turned on and available

Exception: certain devices, including the Amazon Echo Dot and Amazon Echo, disable the Power Saving Feature and the speaker will remain on until you turn the power off.

Charging the Battery

• Insert the small end of the Type-C Charging Cable into the Charging Connector as shown. DO NOT force when inserting, the small end will only insert in one direction.
• Inserting with too much force in the wrong direction will damage the Charging Connector on the speaker.
• Insert the larger end of the Type-C Charging cable into a USB wall charger for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the battery (see illustrations on page 7). Charging Time:
• Up to 5 hours to fully charge a low battery.

Important: When the OontZ Angle 3 Shower – PLUS Edition speaker is plugged in to a charging source with the Type-C charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.

• Insert the larger end of the Type-C charging cable into a USB wall charger for a Smartphone or iPhone (USB wall charger* that is 5V 1.0A up to 5V 2.4A maximum), or a USB port on your laptop/computer to charge the OontZ Angle 3 Shower – PLUS Edition battery.
• Only use a USB wall charger that is UL listed. A UL listed USB wall charger will have the logo printed on it.

Turning On and Of

Turn ON

• Press and Release the Power Button
• Red Light will turn on for 3 seconds and then turn of

• Blue Light will turn on after Red Light turns of
• Flashing Blue
• The speaker is in pairing mode
• Solid Blue Your device has connected with the OontZ Angle 3 Shower – PLUS Edition and is ready to play

Turn OFF

• Press and Hold Down the Power Button for 2 Seconds
• Blue Light will turn of

Pair & Connect with Your Device — Step 1

Turn ON your OontZ Angle 3 Shower – PLUS Edition

Flashing Blue Light

• The OontZ Angle 3 Shower – PLUS Edition is ready to pair and connect. Solid Blue Light
• Your device has connected to the OontZ Angle 3 Shower – PLUS Edition and is ready to play.
• The OontZ Angle 3 Shower – PLUS Edition allows the last device it was connected with to automatically reconnect with the speaker each time the speaker is turned on and that device is within range.* The OontZ Angle 3 Shower can be connected to one device at a time.
• To pair and connect to a different device, you need to first disconnect the currently paired device.
• To disconnect the current device, press and hold down the Bluetooth button for 5 seconds.
• The Blue Light will begin flashing and the OontZ Angle 3 Shower – PLUS Edition is ready for the next device to pair and connect.

• Your device needs to be within 100 unobstructed feet of the OontZ Angle 3 Shower – PLUS Edition to pair and connect.
• If there is an issue when connecting please move your device closer to the speaker, then pair and connect.
• When the charge is too low indicated by a flashing red light on the speaker, your device will not be able to connect with the speaker.

Pair & Connect with Your Device — Step 2

With Your iPhone, iPad, or iPod

Go to Settings > Bluetooth, check Bluetooth is on

• Select ‘OontZAngle3Showerxxx’ when it appears under DEVICES (xxx: 3 characters which are unique to your speaker)
• Your device will connect in a few seconds
• The Blue Light will turn solid blue and there will be a quiet chime
• You can now play your audio wirelessly to your OontZ Angle 3 Shower – PLUS Edition

With Your Smartphone, Tablet & Mobile Devices

• Go to Settings > Bluetooth, check Bluetooth is on Scan or Search and select ‘OontZAngle3Showerxxx’ when it appears under AVAILABLE DEVICES (xxx: 3 characters which are unique to your speaker)
• Your device will connect in a few seconds
• The Blue Light will turn solid blue and there will be a quiet chime
• You can now play your audio wirelessly to your OontZ Angle 3 Shower – PLUS Edition

Note: Your Smartphone or Tablet instructions may vary

Important – The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

With YourApple Mac or Windows Laptop/Computer

For the pairing and connecting guide for your Apple Mac or Windows laptop/computer, please visit: TheOontZ.com/pairing.

Note: The Alexa function is only available on your iPhone or Smartphone running the Android operating system.

Using the OontZ App for Alexa

To Talk to Amazon Alexa Download the OontZ App from the Apple App Store® or Google Play ™ Store

• Open the Apple App Store® or Google Play™ Store on your iPhone or Smartphone running the Android operating system.
• Search for the “Oontz” app and install.
• After the app has been installed the “Oontz” app will appear on your iPhone or smartphone.

• To enable the OontZ app with your OontZ Angle 3 Shower – PLUS Edition
• Turn on your OontZ Angle 3 Shower – PLUS Edition speaker and connect to the device with the OontZ app installed. (For Pair and Connect instructions please see page 9)
• Launch the OontZ app and the Home screen will appear searching for the OontZ Angle 3 Shower – PLUS Edition speaker.
• Press the ‘OontZ Angle 3 Shower’ Grey speaker icon on the app to enable the OontZ app with the OontZ Angle 3 Shower – PLUS Edition.
• Select ‘Confirm’ from the message displayed.
• See next page for continued instructions.

• Select ‘Amazon Alexa Login’ and follow the instructions in the app.

• You can talk to Amazon Alexa on the OontZ Angle 3 Shower – PLUS Edition.
• With Alexa, you can ask to play music, hear the news, check weather, control smart home devices, and more. Alexa lives in the cloud, so it’s always getting smarter, adding new capabilities that are delivered to your device automatically. Using Amazon Alexa
• With the OontZ Angle 3 Shower – PLUS Edition connected to your iPhone or smartphone launch the OontZ app.
• Then just press and release the button and talk to Alexa. Alexa will respond instantly.
• Use Alexa to play your music on the OontZ Angle 3 Shower – PLUS Edition, adjust the volume of your music, check the weather and much more.
• “Alexa, play country music”
• “Alexa, turn up the volume”
• “Alexa, what’s the weather?”

Using the OontZ app for Speaker Updates

Select the Menu in the upper left hand corner of the app. Select ‘Device Information’ from the menu to check the version of the current firmware version on the OontZ Angle 3 Shower – PLUS Edition and whether there is a new version available.

• The firmware version of the OontZ Angle 3 Shower – PLUS Edition is shown under ‘Main Version’.
• If there is a new version of firmware for the OontZ Angle 3 Shower – PLUS Edition a red ‘New’ will be displayed next to ‘Main Version’ label.

Important Note: During the update make sure the OontZ Angle 3 Shower – PLUS Edition is plugged into power and the iPhone or Smartphone is not interrupted by a phone call during the update of the OontZ Angle 3 Shower – PLUS Edition.

Before Starting the Update

• Connect the OontZ Angle 3 Shower – PLUS Edition to a Power Source. Insert the small end of the Type-C charging cable into the OontZ Angle 3 Shower – PLUS
• Edition charging port and insert the larger end of the Type-C charging cable into a USB wall charger. Starting the Update
• Press the red ‘New’ and follow the instructions in the OontZ app. After the Update is Successful
• After the update is successful the red light on the speaker will turn off.
• Important: The speaker needs up to an additional 30 seconds to install the update. Before disconnecting the Type-C charging cable or turning on the speaker, wait for approximately 30 seconds until the red light turns on and is lit red on the speaker.
• After the red light turns on and is lit red the Type-C charging cable can be disconnected from the speaker and the speaker can be turned on.

IPX7 WaterProof

• The OontZ Angle 3 Shower – PLUS Edition is Waterproof and it is IPX7 certified
• The perfect speaker for listening to your favorite music in the shower
• Perfect for taking to the beach and listening by the pool
• IPX7 means the OontZ Angle 3 Shower – PLUS Edition is WaterProof and can handle water spray from the shower or being splashed and can handle being partially or fully submerged in water up to a maximum of 3 feet deep, for up to a maximum of 30 minutes
• The rubber flap needs to be closed for the speaker to be waterproof and dustproof.

Important Safety Precaution: When the OontZ Angle 3 Shower – PLUS Edition speaker is plugged in to a charging source with the Type-C charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.

To Play with Non-Bluetooth Devices Use a 3.5mm Stereo Audio Cable

Turn ON your OontZ Angle 3 Shower – PLUS Edition

• Plug one end of a 3.5mm stereo audio cable into the AUX IN Jack on the speaker.
• The Blue Light will turn solid Green.
• Plug the other end of that 3.5mm stereo audio cable into the headphone jack on your device.
• Make sure both ends of the cable are fully inserted
• You are now ready to play.

Important: The Bluetooth on the OontZ Angle 3 Shower – PLUS Edition is disabled when a 3.5mm stereo audio cable is connectedto the speaker. Page 20

Important Notes:

• The Alexa function will only work when connected over Bluetooth to your iPhone or Smartphone running the Android operating system. It will not work when connected with the 3.5mm Stereo Audio Cable.
• Note: The rubber flap needs to be closed before the speaker is exposed to water. The speaker is not water-resistant or waterproof when the flap is open.
• The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

Reset Function

• Step 1: Remove the Type-C charging cable and 3.5mm Audio cable, if connected.
• Step 2: With the OontZ Angle 3 Shower – PLUS Edition off press and hold down the Power button for 8seconds, then release.
• Step 3: The speaker has now been reset and you can turn it on.

Safety and Precautions

• When the OontZ Angle 3 Shower – PLUS Edition speaker is plugged in to a charging source with the Type-C charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
• Read and follow all instructions – All operating and use instructions should be followed.
• Protect the Type-C charging cable from being pinched, particularly at the connectors.
• Unplug the Type-C charging cable during lightning storms or when unused for long periods of time.
• Do not place speaker near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way.
• Do not make alterations to this speaker.
• The battery in the speaker is not replaceable. Do not attempt to change it.
• Use this speaker only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC) in accordance with the manufacturer’s specifications.
• Do not place near naked flame sources, such as lighted candles, on or near the speaker.
• Do not expose this speaker to excessive heat (e.g. from storage in direct sunlight, fire or the like)
• If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice

REFRENCE LINK