Anykit D55 Tire Inflator Portable Air Pump User Manual

Anykit D55 Tire Inflator Portable Air Pump User Manual

KNOW YOUR PRODUCT

1. Inflation hose
2. Car charging cable
3. USB Type-C cable
4. Storage bag
5. Short adapter
6. Long adapter
7. Ball needle
8. Presta adapter
9. Cigarette lighter fuse

BATTERY LEVEL INDICATOR & CHARGING

Battery Level Indicator
The battery level is shown by four bars, with each bar representing 25%

• 1 bar = under 25%
• 2 bars = between 25% and 50%
• 3 bars = between 50% and 75%
• 4 bars = between 75% and 100%

Charging
Fully charge the inflator before using it for the first time. To charge, connect it to a certified 5.0V/2A USB charger with the charging cable.

• 1 bar flashing = under 25%
• 1 bar solid, 2nd bar flashing = between 25% and 50%
• 2 bars solid, 3rd bar flashing = between 50% and 75%
• 3 bars solid, 4th bar flashing = 75% and 100%
• All 4 bars solid = fully charged
• The inflator will automatically switch off if left inactive for 5 minutes after being fully charged.

How to Use the D55 Tire Inflator

1. Check Tire Width: Ensure your tire width is below 12.4 inches (315mm).
2. Power On: Press the power button. The inflator’s display will light up.
3. Set Desired PSI: Use the control buttons to set the correct tire pressure.
4. Connect Nozzle: Securely attach the air nozzle to your tire valve.
5. Start Inflation: Press the start button. The inflator will automatically stop when the desired pressure is reached.
6. Remove Nozzle Carefully: Once finished, detach the nozzle carefully as parts may be hot.

HOSE CONNECTION

If the tire inflator’s battery is running low, you can also use a car’s 12V DC cigarette lighter to power your device. When inflating larger tires like those on pickup trucks, it is advisable to use a cigarette lighter DC 12V power supply as it will provide faster inflation speed.

Note:
Do not use this product when the car carries a load that exceeds its capacity. This car tire inflator is unsuitable for inflating large trucks and RV tires

12V DC POWER

1. Locate the charging port on the air pump, plug one end of the charging cable into the charging port.
2. Locate the 12V DC cigarette lighter in your vehicle and insert the plug of the air pump’s power cord into it.
3. Turn on the vehicle’s ignition to supply power to the cigarette lighter.

STARTUP SHUTDOWN

Press and hold the power button for three seconds to turn on the device. The screen will light up. While the device is turned on, press and hold the power button for three seconds to turn off the device. The screen will go completely
dark.

NOTE:
If the device remains idle in the turned-on state for 120 seconds, it will automatically enter a power-saving sleep mode. To wake up the device, simply press the power button briefly.

SWITCH SYSTEM

MODE SWITCHING

It’s convenient for you to switch between the five modes – car, motorcycle, bicycle, ball, and custom. You can use the mode button to switch and select the desired mode, and the default air pressure value will automatically synchronize with the selected mode.

Note: The custom mode does not display a mode icon

UNIT SWITCHING

You can switch between these four units PSI, BAR, KPA, Kg/cm2 as needed. Press the unit button to switch and select the desired unit, and the preset pressure values will automatically convert and change according to the selected unit.

AUTOMATIC SHUT OFF

After selecting the desired inflation mode and preset tire pressure value. Once you press the power button , the inflation process begins. When the tire pressure reaches the preset value, the air pump automatically stops inflating.

NOTE:
It’s important to note that there is a delay of approximately 10 seconds before the inflation process stops after the pressure is displayed as reaching the preset value on the screen. Our tire inflator is designed to ensure accurate and stable tire pressure. To compensate for these potential errors and guarantee that the tire pressure reaches the desired level, our tire inflator has a built-in delay mechanism.

LED LIGHT

First, turn on the power. Then, press and hold the button for 3 seconds to activate the LED light. If you want to enter the white light flashing mode, press the button once. To enter the red-blue light flashing mode, press the button again. If you want to cycle through the modes, simply press the light button briefly. Finally, to turn off the LED light, press and hold the light button. This power bank is capable of providing a 5V/2A output power to charge products with low battery levels. ‘

NOTE:
It’s important to note that you should not connect a USB cable to the USB-A port of the tire inflator and the other end to the USB-C port of the tire inflator, as this may cause a short circuit.

THE CONNECTION METHOD & USAGE OF NOZZLES

How to install the adapter nozzle onto the air pump’s nozzle. Push the adapter nozzle firmly into the air pump’s nozzle until it fits securely.

• Presta standard nozzle – for high-pressure road style and some mountain bicycles

• Ball needle nozzle – for sport balls

HOW TO CHANGE THE FUSE

If you suspect the fuse in the plug adapter, may have blown, unscrew the tip of the plug adapter, remove the fuse, and inspect (The packaging includes replacement fuses).

MAINTENANCE

Chemical Contact:
Avoid any contact between plastic parts of the tool and substances like brake fluids, gasoline, petroleum-based products, penetrating oils, or any other chemicals. These chemicals can potentially damage, weaken, or even destroy plastic components, posing a serious risk of personal injury.

Cleaning:
Keep the tool clean to ensure its longevity and optimal performance. Use a soft damp cloth to wipe the tool’s surfaces. Ensure that the cloth is damp, but not wet, to prevent water from entering the tool’s internal components.

Solvents and Plastics:
Plastic parts are susceptible to damage when exposed to various commercial solvents. Avoid using solvents when cleaning plastic components to prevent any potential harm. Instead, use a clean, dry cloth to remove dirt, dust, oil, grease, and other contaminants.

Battery Maintenance:
To maintain the rechargeable battery’s performance and lifespan, take the following precautions:

• Protect the battery from overheating, both during charging and storage. Avoid exposing it to extreme temperatures.
• Recharge the air pump every three months when not in use. This helps prevent the battery from deep discharging, which can be detrimental to its health.

Regular Inspection:
Periodically inspect the tool for signs of wear, loose components, or damage. If you notice any issues, discontinue use and address them promptly to ensure safety and maintain optimal functionality.

Storage:
When storing the tool, keep it in a clean, dry environment. If possible, store it in a protective case or bag to shield it from dust and debris.

Features

Portable & Lightweight Design

The D55 tire inflator is compact and easy to carry, making it ideal for on-the-go use. Whether you’re on a road trip or just need quick inflation at home, its lightweight design ensures maximum convenience.

Built-in Lithium Battery

Equipped with a powerful built-in lithium battery, the D55 can perform efficiently without being plugged in during usage. This allows cordless operation, giving you more flexibility.

 Wide Compatibility

This inflator is compatible with car tires having a width below 12.4 inches (315mm), making it suitable for most vehicles including sedans, SUVs, and motorcycles.

 Safety-Oriented Design

Safety comes first. The inflator features automatic shut-off to prevent over-inflation and comes with thermal protection to avoid overheating during prolonged use.

SPECIFICATIONS

• Model: D55
• Working Voltage: DC 12V
• No Load Flow: 44 L/Min
• Maximum Working Pressure: 150 PSI
• Display Units: PSI, BAR, KPA, KG/CM2
• Battery Capacity: 12000mAh
• Charging Time: 3.5H (5V/3A) – 5H (5V/2A)
• Continuous Working Time: 15 Mins
• Working Noise: Lower than 80dB within 1 meter
• Input: 5V/3A
• Output: 5V/2A USB Type-C

TROUBLESHOOTING

FAQS