GAMDIAS Apollo E2 Elite Gaming Case Mid Tower User Guide

GAMDIAS Apollo E2 Elite Gaming Case Mid Tower User Guide

SPECIFICATIONS

• SERIES 20cm Fans Series
• Product Name APOLLO E2 Elite
• Case Type MID Tower
• Dimension (L x W x H) 392 x 230 x 467 mm
  15.4 x 9 x 18.3 inch
• Chassis Dimension (L x W x H) 350 x 230 x 445 mm
  13.7 x 9 x 17.5 inch
• Motherboard Support ATX, Micro-ATX, Mini-ITX
• Expansion Slots 7+3
• Material SPCC, ABS, Tempered glass
• Window Front, Left
• Radiator Support Top: 280 mm, 240mm
  Front: 360 mm , 280 mm
  Rear: 140 mm, 120mm
• Fan Support  Top: 2 x 120mm , 2 x 140mm
  Front: 3 x 120mm , 2 x 140mm, 2 x 200mm
  Rear: 1 x 120mm, 1 x 140mm
• Pre-installed Fans Front: 2 x 200mm ARGB Fans
  Rear: 1 x 120mm Fan
• Pre-installed Control BOX NO
• Motherboard Sync 5V 3-Pin Addressable Header
• Drive Bays 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage)
  3 x 2.5″
• Clearance CPU cooler height limitation: 190mm
  VGA length limitation: 340mm
  PSU length limitation: 180mm
• I/O Port USB 3.0 x1, USB 2.0 x2,
  HD Audio x1, Fan LED Control x1

EXPLODED VIEW PARTS

PARTS

1. Chassis Body
2. Tempered Glass Side Panel
3. Right Side Panel
4. Top Dust Filters
5. Tempered Glass Front Panel
6. IO Port
7. 20CM ARGB FAN
8. HDD Cage
9. Rubber Foot
10. 120 MM

ACCESSORY

SIDEPANEL REMOVAL

Remove the side panel

MOTHERBOARD INSTALLATION

Lay down the chassis Install the motherboard in the proper location and secure it with screws.

PSUINSTALLATION

Place the PSU in the proper location

3.5″ 2.5″ HDD INSTALLATION

• A. 3.5″ HDD Align the HDD into the mounting holes and screw it in.
• B. 2.5″ SSD Align the SSD into the mounting holes and screw it in.

AIR COOLINGCOMPATIBILITY

• Top 2 x 120mm or 2 x 140mm
• Front  3 x 120mm or 2 x 140mm or 2 x 200mm
• Rear 1 x 120mm or 1 x 140mm
• Bottom 2 x 120mm

RADIATOR COMPATIBILITY

• Top 280 mm or 240 mm
• Front 360 mm or 280 mm
• Rear 140 mm or 120 mm

I/OPORTS

1. Power Button
2. Fan LED Control
3. USB 2.0
4. Headphone
5. Mic
6. USB 2.0
7. USB 3.0

Sync With Motherboard: Press and Hold the Fan LED Control Button for 3 Seconds.

LEDI/O CONNECTORS 

See your motherboard’s manual for front panel header locations and pin-out.

REFERENCE LINK

https://www.gamdias.com/en/component/case/APOLLO_E2