Table of contents
show
GAMDIAS Argus E1 RGB Sync Mid Tower Gaming User Manual
EXPLODED VIEW PARTS
0.Chassis Body
1. Screw
2. Acrylic glass Side Panel
3. Right Side Panel
4. Top Dust Filters
5. I/O Panel
6. 120 mm Fan
7. HDD Tray
8. Rubber Foot
9. Front Panel
10. RGB Button
11. RGB Light
ACCESSORY
SIDE PANEL REMOVAL
- Remove the side panel
MOTHERBOARD INSTALLATION
- Lay down the chassis
- Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
- Place the PSU in proper location.
3.5″ 2.5″ HDD INSTALLATION
- A. 3.5″ HDD:
Align the HDD into the mounting holes and screw in. - B. 2.5″ SSD:
Align the SSD into the mounting holes and screw in.
PCI-E/PCICARD (s)USAGE
- (Optional) Extend in stalling to Motherboard.
- PCI-E Cable Not Included.
AIR COOLING COMPATIBILITY
- Top: 120 mm x 2
- Front: 120 mm x 3
- Rear: 120 mm x 1
- PSU: 120 mm x
RADIATOR COMPATIBILITY
- Top: 240 mm or 120 mm
- Front: 240 mm or 120 mm
- Rear: 120 mm
- PSU: 240 mm or 120 mm
I/O PORTS
- Power Button
- Mic
- Headphone
- USB 2.0
- USB 3.0
- Reset
- LED Control
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
SPECIFICATIONS
- Dimension (L x W x H): 420 x 190 x 455 mm or 16.5 x 7.48 x 17.9 inch
- Case Type: MID Tower
- Material: Acrylic glass, SPCC, ABS
- Side Panel: Acrylic glass ( Left )
- Panel Light: Front Rainbow Color RGB
- IO Port: USB 3.0 x 1, USB2.0 x 2, Mic, Audio x1, LED Control x1
- Expansion Slots: 7
- Drive Bays: 2 x 3.5″ or 2 x 2.5″(HDD Cage) or 2 x 2.5″
- PSU: ATX
- Clearance: CPU cooler height limitation: 155 mm &VGA length limitation: 320 mm& PSU length limitation: 180 mm
