Table of contents
show
GAMDIAS Argus M1 Mid Tower Gaming Case User Guide
EXPLODED VIEW PARTS
0. Chassis Body
1. Screw
2. Tempered Glass Side Panel
3. Right Side Panel
4. Tempered Glass Front Panel
5. Front Panel
6. RGB Light
7. IO Port
8. HDD Tray
9. Top Dust Filters
ACCESSORY
SIDE PANEL REMOVAL
- Remove the side panel
MOTHERBOARD INSTALLATION
- Lay down the chassis
- Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
- Place the PSU in proper location.
3.5″ 2.5″ HDD INSTALLATION
- A. 3.5″ HDD:
Align the HDD into the mounting holes and screw in. - B. 2.5″ SSD:
Align the SSD into the mounting holes and screw in.
PCI-E/PCICARD (s)USAGE
- (Optional) Extend in stalling to Motherboard.
- PCI-E Cable Not Included.
RADIATOR COMPATIBILITY
- Front: 360 mm or 280 mm
- Rear: 120 mm
I/O PORTS
- Power Button
- LED Control
- USB 3.0
- USB 2.0
- USB 2.0
- Headphone
- Mic
- IO LED Control
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
SPECIFICATIONS
- Dimension (L x W x H): 365 x 190 x 365 mm or 14.4 x 7.5 x 14.4 inch
- Case Type: Mini Tower
- Material(s): Tempered Glass, SPCC, ABS
- Side Panel: 4mm Tempered Glass x 2 (Left & Front)
- Motherboard Support: 6.7″ x 6.7″ (Mini ITX), 9.6″ x 9.6″ (Micro ATX)
- LOGO Light: Yellow LED
- Expansion Slots: 4
- PSU: ATX PS2