Armitron M807 Pro Sport Watch User Manual

BUTTON OPERATION

• A. Reset
• B. Mode
• C. ST/STP
• D. Light

FEATURES

• Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)
• Calendar Mode
• 24 Hour Alarm(s) with buzzer signal output
• Hourly Chime: One ‘Beep’ sound every full Hour
• Chronograph Mode: Hours, Minutes, Seconds and 11100 of a Second with Lap Operation
• Countdown Timer
• Second Time Zone
• Water Resistant as indicated on the watch
•  INSTALITE – Electro Luminescent Display

SELECTING FEATURES

1. Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.
2.  From Time Telling Mode, press ‘B’ once. Chronograph Mode appears. Press ’B’ four times to return to Time   Telling Mode.
3.  From Time Telling Mode, press ’B’ twice. Alarm Mode appears. Press ’B’
   three times to return to Time Telling Mode.
4. From Time Telling Mode, press ‘B’ three times. Countdown Timer Mode appears. Press ’B’ twice to return to Time Telling Mode.
5. From Time Telling Mode, press ’B’ four times. Second Time Zone Mode appears. Press ’B’ once to return to Time Telling Mode.
6.  From Time Telling Mode, press and hold ‘C’ Calendar Mode appears. Release ’C’ to return to Time Telling Mode.

EL LIGHT FEATURE

1.  Press ‘D’ or ‘EL’ in any mode to illuminate the watch face. The backlight will remain lit for 3 seconds.

NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE

ACTIVATING ALARM + HOURLY CHIME

1.  While in Alarm Mode, press ‘C’ to activate the Alarm. The Alarm Symbol appears to indicate the Alarm will sound at the preset Alarm Time for about 20 seconds or until any button is pressed.
2.  Press ‘C’ again to activate both the Alarm and z Hourly Chime. The Hourly Chime Symbol appears to indicate the Hourly Chime will sound every hour on the hour.
3.  Press ‘C’ again to deactivate the Alarm.
4. Press ‘C’ again to deactivate the Hourly Chime
5. Press ‘B’ to return to Time Telling Mode.

SETTING THE TIME AND CALENDAR

1.  From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to zero out the Seconds.
2. Press ‘B’. Hours flash. Press ‘C’ to advance the Hour.
3. Press ‘ B ~ Minutes flash . Press ‘C’ to advance the Minutes.
4. Press ‘B: Months flash. Press ‘C’ to advance the Month.
5.  Press ‘B: The Date flashes. Press ‘C’ to advance the Date.
6.  Press ‘B: The Day of the Week flashes. Press ‘C’ to advance the Day of  the Week
7. Press ‘B’. 12 Hour or 24 Hour (Military) Time flashes. Press ‘C’ to select either 12 Hour or 24 Hour (Military) Time
8. Press ‘A’ to end sequence and return to Time Telling Mode

SETTING THE 24 HOUR ALARMS

1.  From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
2.  Press and hold ‘A’. Alarm Hours flash. Press ‘C’ to advance the Alarm Hour.
3.  Press ‘B’ Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute.
   NOTE: Pressing and holding ‘C’ will advance digits rapidly.
4. Press ‘B’ Alarm Number flashes. Press ‘C’ to select either Alarm One (t1) or Alarm Two (t2)
5. Press ‘A’ to end set sequence.
6. Press ‘B’ to return to Time Telling Mode.

CHANGING THE BATTERY

Change the battery when the watch becomes slow, the readout darkens or does not appear, or the backlight fails. Before removing the old battery, be sure to denote its polarity so that the new battery is installed in exactly the
same way. Replace with the same kind or equivalent only. This watch contains precise electronic components and should only be opened by a qualified watch technician. However, it is not necessary to return your watch to the manufacturer for battery replacement. It is recommended that you bring your timepiece to a local jeweler.

HOW TO TIMER SET

COUNTDOWN TIMER

1. From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
2.  Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
3.  Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
4.  Press ‘B’. Seconds flash. Press ‘C’ to advance the Seconds.
5. When the Countdown Time is set, press ‘A’ to end set sequence and return to Countdown Timer Mode.
6.  Press ‘C’ to start the Countdown Timer.
7. If desired, press ‘C’ again to stop the Countdown Timer.
8. Press ‘C’ to stop the Timer.
9. Press ‘B’ to return to Time Telling Mode.

SECOND TIMER  ZONE

1. From Time Telling Mode, press ‘B’ four times to enter the Second Time Zone Mode.
2.  Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
3. Press ‘B’ Minutes flash. Press ‘C’ to advance the Minute.
4. Press ‘A’ to end set sequence.
5. Press ‘B’ to return to Time Telling Mode.

NOTE: The Second Time lone (Dual Time) Clock may be used to keep track of a foreign time.

SPLIT TIME

1. While in the Stopwatch Mode, press ‘C’ to start timing.
2. Press ‘A’ to measure and display Split Time.
3. Press ‘C’ to stop timing at the end of the event.
4.  Press ‘A’ to reveal the final Lap Time.
5. Press ‘A’ to reset to zero.
6.  Press ‘B’ to return to Time Telling Mode.

Troubleshooting Common Issues

• Watch not responding? Hold button A for a few seconds to reset.
• Backlight not working? Check if the battery needs replacement.
• Incorrect time? Follow the steps in the “Setting the Time” section.

Where to Get Support

For warranty and repair services, contact Armitron Customer Support at (718) 482-4195 or visit www.armitron.com. This guide ensures you can set up, use, and maintain your Armitron Pro Sport Watch effortlessly. If you need more details, check out the official Armitron website.

FAQS

DOWNLOAD PDF