Audio star 5050ULTRA Portable CD cassette Player

Audio star 5050ULTRA Portable CD/Cassette Player User Manual

Audio star logo

Audio star 5050ULTRA Portable CD/Cassette Player User Manual

Audio star 5050ULTRA Portable CD Cassette Player

Cautions and Warnings

  • To prevent electric shock, match wide blade of plug to wide slot, fully insert.
  • Do not expose the unit to rain or moisture to reduce the risk of fire or electric shock.
  • Use of any controls or adjustments or performance of procedures other than those herein specified, may result in hazardous radiation exposure.
  • Changes or modifications made to this unit not expressly approved by HamiltonBuhl® will void the unit warranty.
  • Do not place the unit on any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.
  • Use of this unit near fluorescent lighting may cause interference to the remote. If the unit functions are erratic, move the unit away from any fluorescent lighting, as it may be the cause.
  • If the battery is incorrectly inserted/replaced, there can be a danger of explosion. Replace batteries with only the same or equivalent type.
  • Do not attempt to charge standard alkaline batteries in the unit. Use only rechargeable NiMH batteries.
  • The remote control’s button cell battery contains mercury. Do not put the battery in the trash; recycle or dispose of as hazardous waste.
  • Lithium batteries, like all rechargeable batteries, should be recycled or may be disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. Never incinerate lithium batteries, as they may explode.
  • Shock hazard: Do not open. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains.
  • Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad, Ni-Mh, etc.) batteries.

Important Safety Instructions

Read these Instructions and retain for your records.

  1. Heed all warnings and follow all instructions.
  2. Do not use this unit near water.
  3. Clean only with a dry cloth.
  4. Do not block any ventilation openings. Utilize in accordance with the instructions.
  5. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  6. Do not defeat the safety purpose of the polarized/grounding-type plug. A polarized plug has two blades – one wider than the other. A grounding-type plug has two blades plus a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  7. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit.
  8. Only use attachments/accessories that are specified by manufacturer.
  9. Use only with a cart, stand, tripod, bracket, or table specified by/sold by the manufacturer. Use caution when moving with a cart to avoid injury from tip-over.
  10. Unplug this unit during lightning storms or when unused for long periods of time.
  11. Refer all servicing to qualified service personnel. Servicing is required if the unit has been damaged, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
FCC Warnings

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
  • Do not expose this unit to dripping or splashing liquids and do not place it on items filled with liquid, such as vases.
  • Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to
    disconnect the unit from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.
  • Do not expose the battery to excessive heat such as sunshine, fire, heaters, etc.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.

Connecting the Power

AC Power Operation
Before connecting the unit to an AC outlet, check that the operating voltage of the unit is identical with the voltage of your local power supply.

Connect the supplied AC power cord to the AC socket at the back of unit. When the AC power cord is plugged in, the batteries are automatically disconnected.

Battery Operation
This unit cannot be operated by battery when the AC power cord is connected. Open the battery cover and put the batteries as indicated inside the battery compartment.

Battery Precautions
When using batteries in this device:

  1. Use only the size and type of batteries specified.
  2. Follow correct polarity when installing batteries as indicated in the battery compartment.
  3. Do not mix different types of batteries (e.g. Alkaline or Carbon-zinc) or old batteries with new ones.
  4. If the device is not to be used for a long period of time, remove batteries to prevent damage or injury from possible battery leakage.
  5. Do not try to recharge batteries that are not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions).
Precautions When Using Batteries
  1. CAUTION: There is a danger of explosion if battery is not inserted correctly. Replace only with the same or equivalent battery type.
  2. Do not mix different types of batteries together (e.g. alkaline, rechargeable and standard (carbon zinc) or old batteries with new ones.)
  3. Exhausted batteries must be removed to prevent possible leakage.
  4. Dispose batteries properly in accordance with environmental regulations in your region.

Control Diagrams

Audio star 5050ULTRA Portable CD Cassette Player fig 1

Audio star 5050ULTRA Portable CD Cassette Player fig 2

Specifications

General

  • Power supply: AC 120V/60Hz
  • DC 9V (Uses 6 “UM-1” size batteries)
  • Output Power: 1.0 watts x 2 (RMS)
  • Speaker: 90mm Cone-Type
  • AUX/MP3 in: 3.5mm Jack
  • Dimensions: 9.45” x 8.27” x 5.12” (L x D x H)
  • Weight: 5.28 lbs.
  • Operating Temperature: +41ºF – +95ºF
  • Frequency: AM: 530 – 1710 KHz
  • FM: 88 – 108 MHz
  • Antenna: AM: Built-in Ferrite Bar
    FM: Antenna Rod

CD

  • Optical Pick-Up Lens: 3-beam semiconductor laser

Troubleshooting

FunctionPossible CausePossible CauseSolution
CD Playback“NO” appears in CD playback modeCD is inserted upside downInsert CD in correctly with CD graphic face up
CD is damaged, scratched or dirtyWipe CD with microfiber cloth or use another disc
Incompatible CD formatSupports Audio CD, CD- R, CD-RW, and MP3 CD
Slide function is not setSlide the function switch to CD/MP3/USB/AUX
CD Playback intermittent or skippingCD is damaged, scratched, dirty or CD lens is dirtyWipe CD with microfiber cloth or use another disc. Use a CD lens cleaning disc to clean lens
USB Recording“NOF” appears in USB Recording ModeUSB Stick is not FAT/ FAT32 formatContact manufacturer of USB stick to learn how to format USB stick into correct format. Change USB Stick.
USB Playback“NOF” appears in USB Recording ModeUSB Stick is defectiveContact manufacturer of USB stick to replace or replace USB stick
Invalid file formatUSB playback supports MP3 format only. No other formats are supported.
No SoundMedia player via AUX IN is still connectedDisconnect Aux In cable
AM/FM RadioNoise or sound distortedStation not tuned properlyCarefully adjust tuner to the desired radio station
Telescopic antenna is not fully extendedFully extend the FM telescopic antenna
Cassette Playback/ RecordingPoor Sound QualityDust or dirt in cassette tapeUse a cassette tape cleaner to clean cassette
Dust or dirt in the cassette player head, capstan, or pinch rollerContact an authorized repair service to clean mechanisms
Aux In Playback/ RecordingNo SoundFaulty Aux In Cable or not inserted properlyReplace Aux in Cable or make sure the Aux In cable is inserted properly into the aux in jack
All FunctionsNo SoundVolume Dial is lowTwist the volume to the right to the desired sound level

DOWNLOAD LINK

https://v3.hamiltonbuhl.com/hammanual/5050ULTRA-Manual.pdf

Leave a Reply