Pyle Audio Wireless Microphone System Manual
This professional wireless set provides a high-quality microphone with a UHF radio system for freedom of movement without loss of audio quality. Please read this manual before using this equipment in order to avoid damage through incorrect operation and to get the best performance from your purchase. This series of professional wireless microphone system used a super steady PLL – synthesized control technic and matches the high efficiency, low consumption discharging technique and super sensitive discharging receiving technique, also apply an independently developed mobile frequency compression, expander circuit, image frequency limiting circuit, a multiple checked silent and noisy circuit, antenna diversity receiving circuit, switch impact noise defeat circuit, resist reverb operation circuit and changed output controlled slowly system and finished on its item named pattern line. Every system is available to an excellent electric function by Q.C. strictly.
About
Uhf Narrow Band: Portable wireless microphone set offering UHF audio transmission, unmatched performance with high signal-to-noise ratio, clear, noise-free, and distortion-free, live sound and excellent quality reproduction unlike other low-level VHF units Bluetooth Compatible: Wireless Handheld Microphone, the latest It has Bluetooth music streaming capability for devices.
Additional features include speech, external audio, digital video and selectable frequency, sound settings, and acoustic pop filter battery powered: Dual microphones powered by 2 AA batteries while the receiver has a simple plug-in of the power adapter. Includes one channel volume control so you can balance vocals as needed 3.5mm Audio Input: Wireless microphones for singing, lets you stream audio from external devices on the auxiliary 3.5mm audio input.
UHF wireless microphone with 6.3mm wired microphone input, 6.3mm unbalanced mix output, and RCA audio in/out Complete set: a wireless microphone with receiver base, 2 transmitter microphones, USB data cable, RCA-aux 3.5mm cable, AUX cable, and ¼” audio cable. Can be used for karaoke, office, and work. Ideal for PA, meetings, and DJ parties Connectivity Technology: Aux
Note:
Plug-in products are designed for use in the United States. Power and voltage are different around the world and an adapter or converter may be required for these products to be used in your location. Please check compatibility before purchasing.
SYSTEM FEATURES
- Adopt the PLL-Synthesized control technically, Multi-UHF channels.
- The UHF frequency range is 523-597.8 MHz, avoiding frequency interruption.
- LCD information display.
- Double noise squelches operation circuit and system will be higher, more efficient, and much more steady.
- Use the dynamic type and Uni-directional cartridge, clear to show the sound.
- High efficient and low consumption design.
- Using the high extension antennas, the operating distance will reach 50m.
SYSTEM TYPE
The Vocal Artist-UHF is a hand-held system designed for singers who desire high-quality microphones and the freedom of wireless performance. The Presenter-UHF is a body-pack system designed for public speakers who prefer an inconspicuous, hands-free lavalier microphone. The Headset-UHF is a body-pack system designed for users in physically active applications, who desire the freedom of hand-free microphones. The Guitarist-UHF is a body-pack system designed for use with electric guitars, basses, and other electric instruments.
FOUR-CHANNEL RECEIVER FEATURES
Rear Panel
- Power Button: Power ON/OFF the receiver.
- Down Function Button: Sets channel data.
- “RF” Signal indicator: lt glows when the Receiver receives an RF signal from Transmitter.
- . LCD Information Display: Show the receiver frequency channel etc.
- Volume Knob: Adjust the volume output of the receiver.
- Up Function Button: Sets channel data.
- AF Audio Level Indicator: Indicate the wireless system audio signal level.
- Antenna.
- The power switch of CH5-8: When switching to the “ON” position, it means CH5 to CH8 is on, and all channels from 1 to 8 are on for work. When switching to the “OFF” position, it means CH5 to CH8 is off, and only CH1 to CH4 is ON for working.
- XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of the amplifier, and mixer.
- 1/4″ Audio Output Jack: Connect the audio cable from this jack to the input port of the amplifier, and mixer. (CH1-4 or CH5-8) 12. Power Jack: Connect the AC/DC adapter to the receiver.
MICROPHONE-TRANSMITTER FEATURES
- Grille: Protects the cartridge and helps reduce the breath sounds and wind noise.
- LCD Information Display: Show the transmitter frequency channel etc.
- Down Function Button: Sets channel data.
- Up Function Button: Sets channel data.
- Power and Audio Mute Switch.
- Battery Cover: Open it to install the battery.
BODYPACK TRANSMITTER CONNECTION
- Lavalier Microphone Connection: Connect the connector of supplied Lavalier microphone to the connecting jack of the transmitter (shown below) Set the transmitter work state in the wireless Lavalier system (L).
- Headset Microphone Connection: Connect the connector of supplied headset microphone to the connecting jack of the transmitter (shown below) Set the transmitter work state in the wireless headset system (H).
Description
Make: Microphone Receiver Base (2) Wireless Handheld Microphone RCA-Assist (3.5 mm) Cable, 4.6′ ft. Auxiliary (3.5mm) Audio Cable, 3. 3′ ft. 1/4′-inch (6.3 mm) Audio Cable, 3.3′ ft. USB Charge Cable USB Wall Power Adapter Specifications: Wireless Operation: UHF Band Transmitter Microphone Element/Type: Dynamic Receiver / Pole Pattern: Unidirectional Wireless Operating Range: Up to 165’+ feet.
Sensitivity: 2/MV Signal-to-Noise Ratio: > 95DB Transmit Power: 10mW Dynamic Range: > 95DB Construction Materials: Metal Alloy Receiver Base, Semi Engineered ABS, and Half Metal Microphone Battery Operated Microphone Require (2) “AA” Batteries, Included No (Each) Power: 120/240V (USB Power, DC 5V) Handheld Microphone Dimensions (L x W x H): 10. 1” x 2.0” x 2.0” – inch (All ) Microphone Receiver Base Dimensions (L x W x H): 8.3″ x 4. 9″ x 2,0″ po
SYSTEM CONNECTION
- Receiver Power Connection: Connect the DC connector of supplied AC/DC adapter To the DC power input of the receiver. Plug the AC Input connecter into an AC120/60Hz or AC220V/50Hz outlet.
- Antenna: Keep the position of the antenna at a 45 angle from vertical.
- Audio Connection: Connect the corresponding output of the receiver by supplying a 1/4w phone jack audio cable or your XLR cable to the Input of power amplifiers and mixer.
SYSTEM SPECIFICATIONS
- RF Carrier Frequency Range: Approximately 523 to 597.8 MHZ (Available frequencies depend on applicable regulations in the country where the system is used).
- Operating Range: 50m (approximately 164ft) under typical conditions
- Audio Frequency Response: 100 to 18,000Hz, ±3dB • THD: <1%
- Mobile state Range: > 100dB
REFERENCE LINK
https://pyleusa.com/products/pdwm8225