Aver Media AW315 Wireless Microphone Manual

Aver Media AW315 Wireless Microphone

Disclaimer

All pictures contained in this documentation are example images only. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.

Copyright and Trademark Information
© 2019 by Aver Media Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be reproduced, transmitted, transcribed, altered or translated into any language in any form by any means without the written permission of Aver Media Technologies, Inc. Information and specification contained in this manual are subject to change without notice and do not represent a commitment on the part of Aver Media. For more information, please visit www.avermedia.com. Aver Media is trademark or registered trademark of Aver Media Technologies, Inc.

Important Safety Instructions

1. Read these instructions.
2.  Keep these instructions.
3. Follow all instructions.
4.  Heed all warnings.
5. Do not use the apparatus on uneven or unstable surfaces.
6. Do not use this apparatus in a wet environment or near water.
7. Unplug the apparatus before cleaning. Clean only with a dry cloth.
8. Use in a well ventilated environment. Do not block any ventilation openings.
9. Use the apparatus within ambient temperatures 32–104°F (0–40°C).
10. Use power sources within the specified voltage range.
11. Do not place heavy objects on the apparatus.
12. Do not install near heat sources such as radiators or stoves.
13. Do not defeat the safety purposes of the polarized or grounding-type plug.
14.  Protect the power cord from being walked on or pinched, particularly where the cord connects with plugs or adapters.
15. Only use the attachments and accessories specified by the manufacturer.
16. Unplug this apparatus during lightning or when unused for prolonged periods of time.
17. Do not modify or disassemble the apparatus in any way.
18. Refer all servicing to Aver Media Customer Service.
19.  Do not dispose the apparatus as general household waste. Dispose in accordance with local environmental laws.

Inside the Box

These are what you’ll find in the box*:

Please refer to the package label for your actual contents as they vary depending on different SKU variants. For details on purchasing accessories, visit our product webpage.

Parts and Ports

Microphone

1.  Microphone
2. Lanyard Hole
3. Battery LED
4. USB Power Port
5. Mic Input
6. Clip
7. Charging Dock
8. Connector
9. Power LED
10. Power Button
11.  Volume Up Button 11 Volume Down Button
    Charging Dock
    
    
12. USB Power Input
13. LED Indicators
14. Charging sockets
15. Mounting Keyholes

Parts and Ports

1. Antenna
2.  Mic 1 LED Indicator
3. Power Button/LED (Press and hold 5 sec to switch between Power Saving Mode* and Normal Mode**)
4. Mic 2 LED Indicator
5.  USB Power Port
6. Audio Input
7. Audio Output
8. Line/Mic Audio Out Switch
9.  Mounting Keyholes

Power Saving Mode: Receiver automatically turns off after 30 minutes without receiving any microphone signal. Normal Mode is set as default: Receiver stays on once turned on.

Installation

Note:
To avoid excessive sound on initial sound test, lower your speaker system volume first. (ii) Fully charge your microphone before first use.

1. Connect the receiver to a power outlet.
2. Connect the receiver Audio Output to a Mic Input on a speaker system or to a Line Input on a standalone speaker.
3.  Turn the Audio Out Switch to Line or Mic accordingly.
4. Turn on the microphone and start using.*

After being turned on, if the microphone and receiver do not work and their Power LEDs flash slowly, turn the microphone off and turn it back on. The microphone will automatically search for the receiver and start to pair. The pairing is complete when the Power LEDs turn solid green.