Amazon Basics B003L1ZYZ6 Wireless Remote Control Manual
For Nikon D40, D40x, D50, D60, D70, D70s, D80, D90, D3000, D5000, D7000, & P7000 Digital SLR cameras
Features
- Triggers the shutter without disturbing the camera
- 16’ (4.87 m) wireless range
Contents
- Wireless remote
- CR2025 battery (pre-installed)
- Velvet carrying pouch
- 1-year warranty
Using your remote
- Prepare your remote Remove the plastic tab.
- Prepare your camera Locate the Delayed remote (A) or Quick-response remote (B) mode on your camera (the mode name may vary depending on your model). Check your camera’s user manual for detailed instructions on locating these modes.
- Use your remote Aim the remote at the camera and press the button.
2011. All rights reserved. Amazon and the AmazonBasics logo are trademarks of Amazon.com, LLC. or its affiliates. All other trademarks are the property of their respective owners.
Warning
Keep out of Reach of Children Care should be taken to prevent infants and children from putting the battery or other small parts in their mouths. Should a child swallow the battery, consult a physician immediately. Only use the specified battery (CR2025 3V). Put positive and negative poles in the correct place. When disposing of batteries, do not put them in household trash. Instead, give them to the collection station or dispose of them at a special garbage depot. Remove empty batteries from the product. The batteries are non-rechargeable and must not be recharged. Do not use different types of batteries, mix new and used batteries, or mix alkaline, standard (carbon-zinc), or rechargeable batteries. Do not short-circuit connecter clips.
FCC information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
REFERENCE LINK
DOWNLOAD PDF LINK
