AmazonBasics B01FV0FAL2 2.4GHz Wireless Presenter Remote User Manual

AmazonBasics B01FV0FAL2 2.4GHz Wireless Presenter Remote User Manual

Contents:

Before getting started, ensure the package contains the following components:

1. 2.4GHz Wireless Presenter
2. Mini Receiver 1
3. AAA Battery

Operating Instructions

Step 1: Installing the batteries

• Remove the battery cover on the back of the presenter.
• Place two AAA batteries (included) in the battery compartment. Make sure to match the + and – on the battery to the + and – signs in the battery compartment.

Step 2: Connecting the presenter to the computer

• Remove the mini receiver from built-in storage located on the inside of the battery cover and insert it into a USB port on the computer. The computer system will automatically detect the receiver and install the new USB driver.
• Power on the presenter by sliding the on/off switch to the ON position. When the driver is installed, the computer will notify you that the device is connected and ready to use.

Note: If you are having trouble connecting to your computer, follow the troubleshooting steps below.

• Remove the mini receiver from the USB port and turn off the presenter.
• Re-insert the mini receiver into the USB port and place the presenter within 20cm of the mini receiver. Press and hold the Play button while turning on the presenter to establish a connection to your computer. This process should be finished within 1 minute.

Step 3: How to Use with PowerPoint

• Open a PowerPoint file.
• Press the Play button to start the slideshow.
• Use the Page Up button to advance to the next slide and the Page Down button to return to the previous slide.
• Control the volume by pressing the Vol+ button to increase and the Vol- button to decrease.
• Press the B button to blacken the screen and resume the presentation.
• Press the Red Laser Pointer Key to activate the red laser beam.
• Press the Esc button to exit the presentation.

Description of features

1. Indicator Light (Indicates presenter is working when first turned on and when battery is low)
2. Power ON/OFF switch
3. Vol +
4. Page Up
5. Vol –
6. Laser pointer
7. Esc
8. Red Laser Pointer Key
9. Play
10. Battery cover
11. Page Down
12. Mini receiver
13. B button (to blacken screen)

Safety and Compliance

Read this instruction manual carefully before using the appliance. Familiarize yourself with the operation, adjustments and functions of switches. Understand and follow the safety and operation instructions in order to avoid possible risks and hazards. Keep for future reference. If you give this device to someone else, this instruction manual must be included too.

WARNING – DANGER OF SUFFOCATION! Remove all packaging and keep all packaging materials out of reach of children. Children should not play with the packaging materials, as they may be swallowed and cause suffocation.

Battery safety advice

• Danger of explosion if the battery is replaced with one of the wrong type. Replace the battery only with the same or equivalent type.

Warning!

• The batteries (battery block or built-in batteries) must not be exposed to excessive heat, i.e. direct sunlight, fire or the likes.
• Do not swallow the battery, there’s risk of chemical burns.

• The product contains batteries. If a battery gets swallowed, can cause internal burns and cause death within 2 hours.
• Keep new and used batteries out of the reach of children.
• If the battery compartment doesn’t close properly, stop using the product and keep it out of the reach of children.
• If you think that the batteries were swallowed or introduced in any part of the body, seek medical attention immediately.
• Leaking battery acid may cause harm.
• If batteries should leak, remove them with a cloth from the battery compartment. Dispose of batteries according to the regulations.
• If battery acid has leaked avoid contact with skin, eyes and mucous membranes. Rinse affected areas immediately after contact with the acid and wash with plenty of clean water. Visit a physician.
• Do not allow children to replace batteries without adult supervision.
• Danger of explosion! Batteries may not be charged, re-activated by other means, disassembled, thrown into fire or short-circuited.
• Always insert batteries correctly with regard to the polarities (+ and –) marked on the battery and the battery compartment.
• Batteries shall be stored in well-ventilated, dry and cool conditions.
• Exhausted batteries should be immediately removed from equipment and properly disposed of.
• Use the correct type (AAA battery).
• Remove the battery if you will not be using the appliance for an extended period of time.
• Laser radiation do not stare into beam Class 2 laser product.
• Caution! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

FCC Information

• This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help

Specifications

• Model No. B01FV0FAL2
• Battery 2 x 1.5 V (AAA)
• Transmission frequency 2.4 GHz
• Transmission power >45 dbm
• Rated frequency band 2.402 GHz ~ 2.476 GHz
• Laser class 2

REFRENCE LINK