1mii B03Pro Bluetooth adapter User Manual

1mii B03Pro Bluetooth adapter User Manual

Product overview and Basic operation

Status Indicator

As a wireless Transmitter

Bypass Mode (Non-Bluetooth)

Quick User Guide for B03Pro

As a Wireless Transmitter (TX Mode)

1. Connect the audio source (TV, DVD, etc.) to the B03Pro “From TV” port with the audio cables provided (optical or AUX/RCA).
2. Connect 1mii B03Pro to a power source (TV, PC USB socket, or power adapter) with a USB cable.
3. Short press the button to power it on.
4. Slide Mode switch to the “TX” position.
5. Pair B03Pro with your Bluetooth-enabled headsets/speakers.
   • B03Pro pairing mode = TX LED flash blue/red alternately fast. First-time use: B03Pro auto-enter pairing mode (with clear memory). Afterward: press the button for 2 seconds to enter.
   • Set your headsets/speakers to pairing mode refer to its user manual.
   • Wait and connect.

As a Wireless Receiver (RX mode)

1. Connect your speaker to the B03Pro “To Speaker” port with the audio cable provided (optical or AUX/RCA).
2. Connect B03Pro to the power source with a USB cable and adapter.
3. Short press the button to power it on.
4. Slide Mode switch to the “TX” position.
5. Pair B03Pro with your Bluetooth-enabled headsets/speakers.
   • B03Pro pairing mode = TX LED flash blue/red alternately fast. First-time use: B03Pro auto-enter pairing mode (with clear memory). Afterward: press the button for 2 seconds to enter.
   • Set your headsets/speakers to pairing mode refer to its user manual.

Bypass mode (Non-Bluetooth mode)

1. Connect the audio source (TV, DVD, etc.) to the 1mii B03Pro “From TV” port with the audio cables provided (optical or AUX/ RCA).
2. Connect your speaker to the B03Pro “To Speaker” port with your audio cable (optical or AUX/RCA).
3. Connect B03Pro to the power source with a USB cable and adapter.
4. Short press the button to power it on.
5. Slide Mode switch to the “Bypass” position.
6. Ready for use.

Important Notice:

1. Make sure your (TV) output is valid. AUX test with earphones.
2. Does NOT support Dolby / DTS under OPT.
3. Bypass can only work with the same type of input/output i.e. AUX input to AUX output or OPT input to OPT output.

Troubleshooting

I am having trouble pairing and connecting to my Bluetooth device. Please check the following: 1. Your wireless device supports the wireless profiles listed in the specifications. 2. B03 and your device are next to each other or within 3 feet / 1 meter. 3. Make sure both B03 and the wireless device are in pairing mode. 2) After connecting and pairing with my wireless device, I cannot hear any music from my sound system. In Optical mode, B03 supports the device with sampling rate under 48kHz. Note: Need to make sure the TV audio format is set to PCM(Fig-1) and the TV sound out as “External Speakers” (Fig-2)

FCC Note:

NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

REFERENCE LINK

https://www.1mii.com/product-item/b03pro-bluetooth-adapter/