Table of contents
show
1mii B03XX Bluetooth Wireless Transmitter & Receiver User Manual
In the box
Product overview
- Switch to Transmitter+Bypass mode/ Power off / Receiver Mode
- Select Codec Format (LL/LDAC/HD)
- Search and Pair
- Confirm OK
- Select Device
- Volume Up/Down
- Reset/ Clear History
TX mode
RX mode
TX MODE
- Slide the mode switch to TX Bypass’ side.
- Enter your headphone / speaker into PAIRING mode. (Please refer to your headphone/speaker user manual for details) .
Search and Connect your device to the Transmitter - Press ® to search for your device on the transmitter. The bottom of the screen should now display “Searching”
- Use to select your device, and then press @ to connect. The bottom of the screen should now display “Connecting)
- Once connected, The device name paired will appear on the LCD screen.
Add another headphone to the transmitter - The transmitter can work with two headphones simultaneously; simply repeat the instructions above to pair & connect the 2nd headphone.
Pair memory
- Turn on your headphone’s, give it 3-5 seconds, they should automatically reconnect.
- If they don’t, Press® once to manually reconnect.
- Enjoy your music.
Note: In TX mode, LDAC decoding format only support one device. If you want to connect two,the format will change to apt-HD automatically. LDAC format does not support two devices at the same time.
RX MODE
- Connect the B03Pro+ to the audio input port of the active speaker with an audio cable.
- Slide the mode switch to “RX side.
- Pairing: Pair B03Pro+ with your Bluetooth-enabled phone/PC/tablet.
- Pairing mode of B03Pro+ (get “Pairing’ on the screen)
- First time use: B03Pro+ auto enter pairing mode (with clear memory)
- Afterward: short press @ button to enter pairing mode.
- Turn on Bluetooth of your Phone or other device and select B03Pro+ in the Bluetooth list.
- Wait for the connected (For quick pairing, better keep both devices within 1 meter when pairing) .
- Enjoy your music.
How to reset the device?
Power on the B03Pro+ and press @+ at the same time ‚holding on over 5s. The device will reset and remove all paired informations, and then enter into pairing mode.
Basic Operations
REFRENCE LINK
