AmazonBasics B0787G1YFG Wireless Keyboard User Manual

AmazonBasics B0787G1YFG Wireless Keyboard User Manual

Parts List

6		Next track
7		To play/pause media playback
8		To stop media playback
9		To start the default Web browser and load the home page
10		To start the default e-mail client
11		To open up the folder ‘My Computer’
12		To open ‘My favorite’ when inside the browser

13		LED indicator	Caps Lock on
14		LED indicator	Number Lock on
15		LED indicator	Low battery and pairing indicator
16		To enable the second function of the Function keys
17	CONNECT button		To establish a pairing with the nano receiver
18	Battery cover
19	Nano receiver

Note: Press + any function key (1 through 12) to trigger the secondary function of each key.

Setup

Installing the Batteries

1. Remove the battery cover.
2. Insert the batteries correctly concerning polarity (+ and –) marked on the battery and the product.
3. Place the cover back over the battery compartment.

Pairing 

• Plug the nano receiver into a USB port of your computer. The connection between the keyboard and the nano receiver should occur automatically.

If the connection between the keyboard and the receiver fails or is interrupted, proceed as follows:

1. Remove the nano receiver from the USB port and plug it back in.
2. Press the CONNECT button on the keyboard.

Note:
The LED indicator on the keyboard blinks when it is in pairing mode and stops blinking when it is successfully paired with the receiver.

LED Indicator

LED is on for 10 sec.
Power ON

LED blinking
During pairing (The LED goes off when pairing is successful or if it keeps failing for longer than 10 seconds.)

LED blinks for 10 sec.
Low battery warning

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Safety and Compliance

Read this instruction manual carefully before using the product. It contains important information for your safety as well as operating and maintenance advice. Observe all safety instructions to avoid damage through improper use! Follow all warnings on the product. Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included

• Never use this product if damaged.
• Do not insert any foreign objects into the inside of the casing.
• Protect the product from extreme temperatures, hot surfaces, open flames, direct sunlight, water, high humidity, moisture, strong jolts, flammable gases, vapors, and solvents.
• Keep this product and its packaging out of the reach of children and pets.

Battery Safety Advice

• Keep batteries out of the reach of children.
• Do not mix old and new batteries or batteries of different types or brands.
• Do not dispose of batteries in fire.
• Store unused batteries in their original packaging away from metal objects. If already unpacked, do not mix or jumble batteries.
• Remove batteries from the product if it is not to be used for an extended period unless it is for emergency purposes. Exhausted batteries should be immediately removed from the product and properly disposed of.
• If the battery leaks avoid contact with skin and eyes. Rinse affected areas immediately with plenty of clean water, then consult a doctor.

Cleaning and Maintenance

• Clean the product with a dry lint-free cloth. Do not allow any water or other liquids to enter the product’s interior.
• Do not use abrasives, harsh cleaning solutions, or hard brushes for cleaning.
• Clean the battery contacts and also those of the product before battery installation

Specifications

• Power Supply: 3 V (2 x 1.5 V AAA battery)
• Current consumption: 50 mA
• Weight – Keyboard: 0.47 kg (1.05 lbs)
• Dimensions- Keyboard: 44.9 x 14.2 x 2.3 cm (17.7 x 5.6 x 0.9 in)
• Encryption: AES128
• OS compatibility: Windows® 7/8/10
• Transmission power: 1 mW
• Frequency band: 2.4 GHz (2.402 GHz – 2.480 GHz)

Disposal

Regulatory information: Disposal of Waste Electrical and Electronic Equipment (WEEE) The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed of separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers to conserve natural resources.

Each country should have its own collection centers for electrical and electronic equipment recycling. For information about your recycling drop-off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service. Used batteries must not be disposed of through household garbage, since they might contain toxic elements and heavy metals that can be harmful to the environment and human health.

Consumers are therefore obligated to return batteries to retail or local collection facilities free of charge. Used batteries will be recycled. They contain important raw materials such as iron, zinc, manganese, or nickel. The crossed-out wheelie bin symbol indicates that batteries and rechargeable batteries must not be disposed of through household garbage.

REFERENCE LINK