AmazonBasics B07PDYW6VM Bluetooth Stereo Speaker Guide

AmazonBasics B07PDYW6VM Bluetooth Stereo Speaker Guide

Contents:
Before getting started, ensure the package contains the following components:

• A Speaker
• B AUX IN socket
• C Reset switch
• D USB Micro B port
• E USB cable
• F Status indicator
• G On/off switch
• H Decrease volume switch
• I Play/pause/call switch
• J Increase volume switch
• K Bluetooth® switch
• L Microphone

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

• Read these instructions.
• Keep these instructions.
• Heed all instructions.
• To avoid accidental falls into pools, bathtubs, or other water containers, do not place it at the edge.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
• Refer all servicing to qualified service personnel.
• No naked flame sources, such as lighted candles, should be placed on the product.
• This product is only suitable for use in moderate climates. Do not use it in tropical or particularly humid climates.

Battery Warnings

• Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
• The battery contained in this product is nonreplaceable. Do not throw the product into a fire.
• Before disposal, the battery must be removed from the product. Contact a qualified professional.
• Do not leave the battery charging for a prolonged period when the product is not in use.
• Do not charge overnight.
• If the product appears to be bulging or shows other undesirable phenomena (e.g. excess noise), stop using it immediately.
• Do not drop this product.
• Do not cover while charging.
• Charge this product once every 3 months to avoid shortening its battery life.
• Batteries produce heat when charging and discharging. If the product becomes too hot to touch, turn it off and unplug it immediately.
• Charge this product only with a compatible power source from a reputable manufacturer e.g. a power adapter.
• If the battery leaks avoid contact with skin and eyes. Rinse affected areas immediately with plenty of clean water, then consult a doctor.

Operation

Charging built-in battery

• When the voice indicator “Low Battery” is heard, the product needs to be charged.
• Connect the USB cable (E) to the USB Micro B port (D).
• Connect the other end of the USB cable (E) to a USB-A port on a computer or a suitable power adaptor 5V 2 A. The status indicator (F) flashes red during charging.
• The product is fully charged when the status indicator (F) stops flashing.

Switching on/off
Press and hold the on/off switch (G) to switch on/off. This prompts the voice indicator respectively, for each step.

Pairing mode

NOTICE
Bluetooth® pairing is required if the speaker is used for the first time with a new Bluetooth® enabled device.

• After switching on the product, the status indicator blinks blue slowly for approximately 12 seconds. After that, the product goes into pairing mode automatically.
• If the product does not automatically start pairing mode, press the Bluetooth® button (K) to enter pairing mode. The status indicator flashes blue.
• Activate Bluetooth® on the device you wish to pair and search for a new device.
  
• Select the Bluebooth® device name from the list on your device.
• Once the devices are paired, the status indicator (F) lights up blue.

Disconnecting Bluetooth®
Press and hold down the Bluetooth® button (K) to disconnect the connected device.

NOTICE
The product continuously attempts to reconnect a lost Bluetooth® connection. If it cannot, manually reconnect via the device’s Bluetooth® menu.

Auxiliary input mode

Connect a 3.5 mm audio cable (not included) to the AUX IN socket (B) and the desired playback device e.g. MP3 player.

Music playback

• : Press to play/pause the playback.
• : Press to skip to the next track.
• : Press to return to the previous track

Calling

• : Press to accept/end call.
• : Press and hold to reject the call.

Volume control
NOTICE
The volume of the playback resets to medium volume after each start-up

• : Press and hold to increase volume.
• : Press and hold to decrease volume.

Factory reset
If the product is not functioning properly, press the reset switch (C) with a pointed object (for example a paper clip) to reset to the original factory settings.

Cleaning and Maintenance

Switch the product off before cleaning. During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.

• To clean, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, or metal or sharp utensils to clean the product.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Simplified EU Declaration of Conformity

• Hereby, Amazon EU Sarl declares that the radio equipment type B07PDYW6VM, B07PLCY3PV, B07PJ67Q7Z, B07PKBTB4X, B07PH2HVGM, B07PKBWYRT complies with Directive 2014/53/EU.
• The full text of the EU Declaration of Conformity is available at the following internet address: https://www.amazon.co.uk/amazon_private_brand_ EU_compliance

Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed of separately from ordinary household wastes at its end of life.

Be aware that this is your responsibility to dispose of electronic equipment at recycling centers to conserve natural resources Each country should have its own collection centers for electrical and electronic equipment recycling. For information about your recycling drop-off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service

Specifications

• Model number:
  • B07PKBTB4X
  • B07PH2HVGM
  • B07PKBWYRT
• Input: 5 V 2 A, Lithium battery 3.7 V, 4400 mAh
• Operation frequency: 2402 – 2480 MHZ
• RF power: 4 dBm
• Charging time: 4 hours
• Power consumption: Max. 9 W
• Frequency response: 70 Hz to 20 kHz
• Sensitivity: – 3.9 dB
• Impedance: R= 4 Ω; L= 4 Ω
• Bluetooth® version 4.2
• Operating distance (range): 32. 8′ (10 m)
• IP Rating: IPX4
• Net weight: approx. 14.1 oz (401 g)
• Dimensions (L x W x H): approx. 7 x 1.8 x 2.3 in (178 x 45 x 58 mm)

REFERENCE LINK

https://www.amazon.ae/Amazon-15-Watt-Bluetooth-Speaker-Resistant/dp/B07PDYW6VM