AmazonBasics B07TT6GYQ3 LED Rope Light User Manual

AmazonBasics B07TT6GYQ3 LED Rope Light, User Manual

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

• When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place it on sharp hooks or nails.
• Do not let lamps rest on the supply cord or any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product – not a toy! To avoid the risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use an extension cord unless the plug can be fully inserted. Do not alter or replace the plug.
• Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS

Intended Use

• This product is intended for indoor and outdoor all-year decorative use.
• This product is intended for household use only. It is not intended for commercial use.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Before First Use

• Check the product for transport damages.
• Before connecting the product to the power supply, check that the power supply voltage and current rating correspond with the power supply details shown on the product rating label.

Product Description

• A Female cord connector
• B LED lamp (non-replaceable)
• C Attachment plug with the fuse
• D Mounting clip and screw set

Installation

• Determine installation location and lay the product in place before assembly.
• Fix the product directly to the structural support. Use provided mounting clips (D).
• Connect the plug (C) to a suitable outlet. The product lights up.

Connecting in series
To attach additional rope lights, unscrew the end cap on the female cord connector (A) and remove the end plug. Then connect the male cord connector from another set and tightly screw the end cap.

WARNING
Risk of electric shock! Do not combine more than:

• 4 sets for a 40-foot (12 meters) version or
• 8 sets for 20-foot (6 meters) version.

The total length of a set should not exceed 160-foot (48 meters).

Use and Care Instructions

WARNING
Risk of electric shock! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.

Cleaning

• To clean, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, or metal or sharp utensils to clean the product.

Maintenance 

• When the product is placed on a live tree, the tree should be well-maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
• If the product is placed on a tree, the tree should be well-secured and stable.
• Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.

When storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or stress on the product conductors, connections, and wires.

• When not in use, store neatly in a cool, dry location protected from sunlight.

User Servicing Instructions

Fuse replacement

• Grasp the plug (C) and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
• Slide open the fuse access cover on top of the plug (C) towards the blades.
• Remove the fuse carefully. Use a pointed object to push the fuse out of the socket.
• Replace the fuse with a spare one located in the fuse compartment and slide close the fuse access cover on top of the plug (C).

CAUTION
Risk of fire! Replace only with max. 3 Amp, 125 Volt fuse. Risk of fire! Do not replace the plug (C). It contains a safety device (fuse) that should not be removed. Discard the product if the plug (C) is damaged.

FCC – Supplier’s Declaration of Conformity

Unique Identifier

• B07TT6GYQ3 – 180 LED Candy Cane Striped Rope Light, 20-Foot
• B07TV72B57 – 360 LED Candy Cane Striped Rope Light, 40-Foot
• B07TT6G9NC – 210 LED Green Rope Light, 20-Foot
• B07TS33SKB – 210 LED Red Rope Light, 20-Foot
• B07TT6GYQJ – 210 LED Blue Rope Light, 20-Foot
• B07TXD56K8 – 210 LED Yellow Rope Light, 20-Foot
• B07TW9WZB5 – 210 LED Purple Rope Light, 20-Foot
• B07TYHNSNS – 210 LED Orange Rope Light, 20-Foot
• B07TRMB894 – 210 LED White Rope Light, 20-Foot
• B07TXD56KT – 210 LED Warm White Rope Light, 20-Foot
• B07TV73X9C – 420 LED Green Rope Light, 40-Foot
• B07TV74YYJ – 420 LED Red Rope Light, 40-Foot
• B07TW9YC73 – 420 LED Blue Rope Light, 40-Foot
• B07TW9WD98 – 420 LED Yellow Rope Light, 40-Foot
• B07TRM9MR7 – 420 LED Purple Rope Light, 40-Foot
• B07TXF1P7Y – 420 LED Orange Rope Light, 40-Foot
• B07TRM8X1B – 420 LED White Rope Light, 40-Foot
• B07TRM8X1K – 420 LED Warm White Rope Light, 40-Foot

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Specifications

REFERENCE LINK