Baby Brezza BRZ00141 Baby Food Maker Complete White User Guide

Baby Brezza lOgO

Baby Brezza BRZ00141 Baby Food Maker Complete White User Guide



When using electrical appliances, basic safety precautions should always be followed, including the following:

  1.  Read all instructions before using.
  2.  Do not touch hot surfaces. Use handles or knobs.
  3.  Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, is dropped or has been damaged in any manner. Call your distributor for examination or repair.
  4.  The use of accessory attachments not recommended by the appliance manufacturer may cause fire, electric shock or injury.
  5. Use on level surface and be sure there is no debris under the unit and the rubber pads are touching the surface.
  6. Household use only. Do not use outdoors.
  7.  Do not let cord hang over edge of table or counter, or touch hot surfaces.
  8.  Make sure machine is turned off before unplugging.

Complete One Step Baby Food Maker


How to Use

Clean all parts before first use


  1. To remove water tank, press the release button and lift the water tank up.
  2. Remove water tank cap and fill the water tank.
  3. After filling, place water tank back onto base. Push down firmly until water tank clicks into place.
  4. Place blade in bowl by dropping the blade on the driveshaft.
  5. Add chopped ingredients to the bowl. Refer to recipe guide for measurements.
  6. Choose the desired settings. See back page for control panel details

CAUTION: Always make sure driveshaft and driveshaft gasket are properly inserted into bowl before steaming or blending. Use of the machine without the driveshaft and gasket will result in water damage to the base.

Cooking & Controls

team + Blend – Automatically blend after steaming
Press repeatedly until desired cooking time is selected. Each press adds 5 minutes to the steam time. Max time is 30 minutes. Press(Q)to begin the steam+ blend cycle. Once the steam cycle is complete, the blend cycle will run for 30 seconds and the machine will shut off. For a smoother consistency, press and hold @to blend more. Make sure bowl lid is locked onto bowl. Do not remove lid when blade is moving.

Steam Only
If you would like to steam without the automatic blend cycle, press 9 repeatedly until desired steam time is selected.
Press(Q)to begin steam cycle. Machine will beep 3 times and shut off when steam cycle is complete. Make Blend sure Only bowl lid is locked onto bowl. Press and hold @ O until desired consistency is achieved. Do not remove lid when blade is moving.

Filling the Food Pouch



  • Always unplug the appliance before cleaning.
  •  Clean the appliance, food pouches, and easy fill funnels before and after use.
  •  Bowl, Blade and Bowl Lid are top shelf dishwasher safe and can also be hand washed with warm, soapy water. Never use abrasive pads to clean machine parts.
  •  Stainless steel heating plate can be scrubbed with abrasive pad to remove mineral scaling.
  •  Never put the Driveshaft in the dishwasher.
  •  Base and Driveshaft should be wiped with damp cloth only.
  •  We recommend regular cleaning of the Steam Tank to prevent damage to the machine from mineral deposits.
  • The frequency of cleaning will depend on the type of water you are using and how much mineral deposit build up forms. Always unplug before cleaning.
  • Never use a chemical descaler in the machine.
  • Any other servicing should be performed by an authorized service representative.


Cleaning the Food Pouch

  • The food pouch and easy-fill funnel are top rack, dishwasher safe.
  •  Thoroughly rinse out the food pouch with soap and water.
  •  Do not use harsh abrasives to clean the food pouch or easy-fill funnel.
  • Allow parts to dry before storing away.


Removing and Replacing the Driveshaft

Remove driveshaft from bowl before cleaning in dishwasher. See illustration. To remove Driveshaft, turn Knob on bottom of bowl counter-clockwise and pull out. Wipe drive shaft with damp cloth. Never put driveshaft in
dishwasher. Do not misplace Driveshaft Gasket while cleaning. To replace the Driveshaft after cleaning, insert into hole in bottom of bowl and turn clockwise 0 to lock in place*.







Leave a Reply