Wyndham Collection Bathroom Alcove Tubs Design Photos User Guide
Installation Notes
Professional installation by a licensed plumber required. Adhere to all local building and plumbing codes. Be sure that the oor is structurally sound and able to support the full weight of a tub with water and an occupant. Verify that the bottom of the apron is at the same height as the oor covering. 100%Silicone sealant is recommended.Support the bottom of the tub only by the feet or base of the tub. Do not use the rim as a supporting area.
Post-Installation
To clean without scratching use a moist soft cloth and a mild liquid detergent. Do not use abrasive cleaners, scraping tools, or any item that could damage or dull the acrylic surface.
ALCOVE TUB INSTALLATION
TOOLS and ITEMS REQUIRED 
Tape measure 
Pencil
Silicone sealant 
Gloves
Ruler 
Spirit Level 
Protective EyewearPREPARATION
- Construct a plumb stud pocket. Refer to the specification sheet. (figure 1)
Install rough plumbing. (figure 2)
Place the drain into the bathtub. Apply silicone to the drain. (figure 3)
- Apply mortar to the floor surface.(figure 4)
- Lift the tub into position. Make sure to align the drain with the pipe.(figure 5)
- Level all sides of the bathtub. Apply 100% silicone sealant around the bath along the finished.(figure 6)
Install rough plumbing. (figure 2)
Place the drain into the bathtub. Apply silicone to the drain. (figure 3)
DOWNLOAD PDF
Wyndham Collection Bathroom Alcove Tubs Design Photos User Guide
