Table of contents
show
Bestten DS06M Super Slim Digital Led Dimmer Switch User Manual
Functional Specifications
- Status Indicator
- Indicator lights red: OFF status
- Indicator lights white: ON status
- Quickly Press: Within 0.5s
- Press and Hold: Over 0.5s
- Continuous Quickly Press: Each interval of Continuous Quickly Press should within 1s
- Maximum Brightness Button Setting the maximum brightness There are six maximum brightness levels, Quickly pressing the maximum brightness button once can change the maximum brightness level.
- Minimum Brightness Button Setting the minimum brightness: There are six minimum brightness levels, Quickly pressing the minimum brightness button once can change the minimum brightness level.
- Power Button
- Quickly press once to turn ON/OFF.
- Quickly press the power button six times to set the ideal minimum brightness.
- Quickly press the power button eight times to set the ideal maximum brightness.
INSTALLATION
- Remove the screws installed on the existing wall plate and switch, and carefully pull out the switch from the wall box.
- 3 Identify and mark each wire attached to the switch.
- Identify the type of wiring in the wall box, 3-way, or single pole.
Single Pole
- Line (Hot)
- Neutral
- Ground
- Load
3-Way
- Line or Load (See note below)
- Neutral
- Ground
- Traveler 1
- Traveler 2
Typical wiring application
- 4a Single-Pole Connection style 1
- Connect the green wire on the dimmer to the ground wire in the wall box, and secure the connection with a wire nut.
- Connect the black wire on the dimmer to the wire labeled line, and secure the connection with a wire nut.
- Connect the red wire on the dimmer to the wire labeled load, and secure the connection with a wire nut.
IMPORTANT
Please follow the wiring diagrams very carefully. This dimmer will not work in a circuit where a 4-way switch is used.
WE HIGHLY RECOMMEND EMPLOYING THE SERVICES OF A TICKETED ELECTRICIAN
- Traveler 1: There are 2 traveler wires that must be identified individually and they go between the wall box with the line and the wall box with the load.
- You must identify each traveler wire independently and ensure that it is the same wire in each box. Mark one as Traveler 1 in each wall box.
- Traveler 2: Of the 2 traveler wires that go between the wall box with the line and the wall box with the load, you must identify the second traveler wire and mark it Traveler 2 in each wall box.
- The LINE: This is the wire that has power coming in from the electrical panel.
- The LOAD: This is the wire that goes from one switch to the lights.
4b-1 3-Way (3-Way Switch)
Connection style 2
Location
- Connect the green wire on the dimmer to the ground wire in the wall box, and secure the connection with a wire nut.
- Connect the black power wire on the dimmer to the wire labeled line or load, and secure the connection with a wire nut.
- Connect the brown wire on the dimmer to the Traveler 2 wire, and secure the connection with a wire nut.
- Connect the red wire on the dimmer to the Traveler 1 wire, and secure the connection with a wire nut.
Location 2
- Twist all 3 wires together and secure the connection with a wire nut. Connect the other end of the Jumper wire to the Common Terminal on the 3-way switch.
- Connect the wire labeled Traveler 2 to the terminal screw 1 or 2 on the 3-way switch.
4b-2 3-Way (Single Pole Switch)
Connection style 3
Location 1
- Connect the green wire on the dimmer to the ground wire in the wall box, and secure the connection with a wire nut.
- Connect the black power wire on the dimmer to the wire labeled line or load, and secure the connection with a wire nut.
- Connect the brown wire on the dimmer to the Traveler 2 wire on the 3-way switch, and secure the connection with a wire nut.
- Connect the red wire on the dimmer to the Traveler 1 wire on the 3-way switch, and secure the connection with a wire nut.
Location 2
- Twist all 3 wires together and secure the connection with a wire nut. Connect the other end of the Jumper wire to terminal Screw 1 on the Single Pole Switch.
- Connect the Traveler 2 wire to terminal Screw 2 on the Single Pole Switch.
Installing dimmer
- Carefully position all wires inside the junction box, leaving enough space to insert the dimmer.
SPECIFICATION
- Model No: USP-DS06M
- Rated Voltage: 120V
- Rated Frequency: 60Hz
- Rated Wattage: 600W
- Load Range Incandescent: 15W-600W LED/CFL:3W-200W
- Dimming Method: Phase-cut
- Working Environment Temperature: 0°C-40°C Humidity: 10%R.H.-90%R.H.
- Model Size: 105 mmx44 mmx31mm (L*W×H)
TROUBLESHOOTING
FAQS
How do I choose a dimmer switch for LED lights?
A rule of thumb commonly used to calculate a load for LED dimmers is to divide the stated maximum load by 10.
How do LED dimmer switches work?
All phase-cutting dimmers work by switching the AC mains supply to the LED lamp on and off twice in every mains cycle.
What dimmer switch do I need?
Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
What is dimmer level?
The light output changes directly with the dimmer level in a linear dimming curve.
What is the principle of LED dimmer?
There are three main dimming principles of LED dimmers. The three dimming principles are bandwidth control dimming, constant current power supply control and grouping control.
What is automatic dimmer?
An auto-dimming system adjusts the brightness of lights based on surrounding conditions.
How does line voltage dimming work?
The dimmer is a device that sends a low-voltage signal (between 0 and 10 volts) to the LED driver, which controls the brightness of the LED fixture.
DOWNLOAD PDF
0e9c2d8a8ffe80b694376aafb8c7cfa4ad771f9bc57c778c1f7746741ec233e9