Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual featured img

Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual

Views: 60
Table of contents show

Bell Howell logo

Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual

Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual prduct imgPowering BH20TWS On/Off

Slide the power switch to the Bluetooth position Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual fig 1 For Aux connectivity or to play music from your MicroSD card, slide the power switch to the MP3 position. To power the speaker off, simply slide the power switch to the center OFF position.

Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual fig 4

NOTE:
The speaker will automatically power off after eight minutes if the Bluetooth connection is not paired with a device.

Connecting BH20TWS via Bluetooth

Within 10 seconds of powering on, press and hold the button Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual fig 2 for 4 seconds, until a blue/red LED flashes rapidly. This indicates that it is powered on and searching for a Bluetooth source to pair with. Go into your phone/tablet’s Bluetooth settings and enable Bluetooth. Next, enter the Bluetooth device list and select BH20TWS.

After selecting, wait a few seconds for the pairing to complete. Once the pairing is successful, you will hear an audible tone from the speaker and a blue LED will stay solidly lit. NOTE: An additional battery icon may appear next to the Bluetooth icon at the top right of your phone/tablet’s screen, indicating the speaker’s battery level. This is compatible only with certain devices.

Linking another BH20TWS for True

Wireless Sound The BH20TWS includes True Wireless Stereo (TWS) technology. This enables you to link two speakers to emit a true left/right stereo sound. Slide the power button to Bluetooth mode on both speakers. Press and hold the Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual fig 2

buttons simultaneously for 6 seconds until an audible tone is heard from both speakers and a blue/green LED flashes rapidly. This indicates that it is powered on and searching for another BH20TWS to link to.

Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual fig 3

They will each sound separately to indicate that the linking mode has been initiated. An additional audible tone will follow within 20 seconds from both speakers, indicating that they have successfully linked together. A green LED will stay solidly lit to show both speakers are linked. When linked, they work together as a true left and right stereo speaker; splitting the audio signal to the correct channels.

NOTE:

When TWS is enabled, you only need to Bluetooth pair to one speaker. On one speaker, press and hold the Bell Howell BH20TWS True Wireless Stereo Bluetooth User Manual fig 2 button for 4 seconds. A blue/red LED will flash rapidly to indicate that it is powered on and searching for a Bluetooth source to pair with. Go into your phone/tablet’s Bluetooth settings and enable Bluetooth. Next, enter the Bluetooth device list and select BH20TWS. After selecting, wait a few seconds for the pairing to complete. Once the pairing is successful, you will hear and audible tone from the speaker, and a blue/green LED will stay solidly lit. This will connect your phone/tablet with the master speaker which will wirelessly broadcast the right audio signal to the slave speaker. NOTE: TWS is only available in Bluetooth mode.

Charging your BH20TWS
Simply plug the included USB cord into the USB port at the base of the speaker. Once plugged in, the LED will illuminate RED. It will turn off once the internal battery is fully charged.

Specifications

  • Bluetooth Version: 3.0
  • Built-in Lithium-lon Battery: 3.7V, 400mAh
  • Charging Voltage: 5V
  • Speaker: 40mm 40 3W
  • Frequency: 60Hz-18KHz
  • Distortion: <0.5%
  • Effective Distance: 10M

REFERENCE LINK

https://www.bellhowellcameras.com/bluetooth-speakers-cat/bh20tws

Tags: , , ,

Leave a Reply