You are currently viewing MPOW BH427A H12 IPO ANC Wireless Headphones User Manual

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual

MPOW-logo

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual prduct img

Package List

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 1

Diagram

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 2

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 3

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 4

Power ON/OFF

  1. Power on: Press and hold the MFB for 2 seconds, with blue light flashing for 1 second until you hear the voice “Power on”.
  2. Power off: Press and hold the MFB for 5 seconds, with the red light flashing until you hear the voice “Power off”.

How to Pair

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 5

  1. Press and hold the MB for 5 seconds to enter the paring mode, with red and blue flashing alternately and the voice “pairing” heard.
  2. Turn on the Bluetooth function on the phone, search “MPOW H12 IPO” and click to connect. The voice “connected” will be heard after the successful connection.

Volume Control/Music Control

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 6

Play/ Pause/Answer a Call/ Hang up a Call/ Reject a Call

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 7

Clear Pairing Record

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 8With your headphones powered on, keep pressing the MB and the volume + simultaneously for 5s, the blue LED light stays on for 2s and then the red and blue lights flash alternately, which means the pairing record has been cleared and the headphones re-enter into pairing mode.

ANC ON

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 9

Charge the Headphones

MPOW BH427A H12 IPO ANC Wireless Headphones User Manual fig 10

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

REFERENCE LINK

Leave a Reply