MPOW BH474A Soundhot B6 Home Theater 2.0 Soundbar User Manual

MPOW BH474A Soundhot B6 Home Theater 2.0 Soundbar User Manual

Packing List

1.  Mpow Sound hot B6
2. owner supply cord set
3.  3.5mm audio cable
4. 3.5mm to 2-male RCA cable
5.  Optical-fiber cable
6. Remote control
7. Wall mount accessories
8. Thank-you card

Diagram

1. Power button
2.  Volume- I Previous track
3.  Mode switch button
4.  Volume+ / Next track
5. optical-fiber input port
6. Aux-In audio port
7.  Power port

Note: Please connect it to power before using

EQ Switch:
Simultaneously press and hold both 11+” and “M” buttons for 2 seconds

Remote Control

Click OnceClick Once

1. News mode (Voice Mode)
2.  Movie mode
3.  Music mode
4. Reconnection mode
5. Pairing mode

Wall Mounting Wall

 Mark the location on the wall
Choose the mounting height and mark A1; Mark A2. on the right of A 1 on the same horizontal line;To the distance between the 2 spots should be 729mm exactly.

 Drill the holes
Drill the holes in the marked position.

 Install the speaker
Insert the wall plugs in the holes; Tighten the screws into the holes through the foam pads; Hang the speaker on the screws.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

REFERENCE LINK

https://www.mpow.com/