MPOW BH510A True Wireless Earbuds User Manual
PACKING LIST
DIAGRAM
POWER ON
- Mode 1: The earphones automatically turn on(with white LED light flashing) and start pairing when you open the charging case.
- Mode 2: In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MB of both earbuds for 2 seconds to power on (with the white LED light flashing).
POWER OFF
- Mode 1: Put the earphones back in the charging case and close the case to turn them off.
- Mode 1: If the earphones are not in the charging case, just press and hold the MFB of both earbuds for 5 seconds to power them off. (Mode 2 cannot be conducted during music playing or calling.)
PAIRING
- Open the charging case, they will automatically enter the pairing mode in which the LED light flashes white twice per second, and then select “Mpow MDots” Note: The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone, please disconnect Bluetooth on the paired smartphone.
MUSIC
INCOMING CALL
MUSIC & INCOMING CALL & Siri
Volume Up / Down Volume +:
Press and hold the MB button of the Right earbud to turn up the volume increasingly. Volume -: Press and hold the MB button of the Left earbud to turn on the volume decreasingly.
Next / Previous Track
Next Track: Triple-tap the MB of the Right earbud. Previous Track: Triple-tap the MFB of the Left earbud.
Play / Pause
Double-tap the MB of either earbud.
Answer
Tap the MFB of either earbud once.
Mute
When you are having a phone call, you can tap the earbud once to mute or unmute the earbud’s microphone.
Hang up
Double-tap the MB of either earbud.
Reject
Press and hold the FB of either earbud for 1 second.
Activate Siri
When in standby and music mode, firstly tap the MFB of either earbud once, and then instantly press and hold the earbud for 1 second.
RESET
- Take out both earbuds from the charging case.
- Turn off both earbuds by keeping pressing them for 5 seconds.
- Press and hold both earbuds for 10 seconds to clear the paired information
- The LED will flash red and white alternately 3 times.
- Reset successfully.
- Put both earbuds into the charging case to re-enter into pairing mode.
CHARGING
Do not put the earbuds in the charging case when the earbuds are wet.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical& Electronic Equipment) This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
REFERENCE LINK
