Verbatim Bluetooth 32-Key Numeric Keypad and Calculator Guide

Verbatim Bluetooth 32-Key Numeric Keypad and Calculator Guide

Introduction

The Macally BTCALKEY, a Bluetooth numeric keypad with a calculator, allows professionals to efficiently enter long sequences of numbers in spreadsheets, accounting programs, and calculator applications and increase their productivity. Easily toggle between bluetooth numeric keypad mode and calculator mode at the tap of a button. Calculator mode allows you to do the number crunching and send the result to your Bluetooth-powered computer or mobile device. The programmable tax keys allow you to add or subtract your local tax. Thanks to its slim and wireless design, you can keep your desk clean and store it anywhere without cable clutter. You can put it easily in a bag and take it with you when on the road. Before you begin using this product, be sure to read this user’s guide in its entirety.

Package Contents

• BTCALKEY
• 2 “AAA” batteries
• User’s Guide

System Requirements / Technical Support

• Any Mac or PC with a Bluetooth host
• Mac OS X v10.6 to Mac OS X v10.12 and above
• Windows 7/8/10
• iPhone/iPad and Android mobile device

Technical Support
Please E-mail us at techsupport@macally.com, or call us at 1-909-230-6888 Monday to Friday, 8:30 AM to 5:30 PM, Pacific Standard Time FAQ & help – https://help.macally.com/help Manual and driver download – https://us.macally.com/pages/drivers-and-downloads

Macally Product Information

This manual is furnished under license and may be used or copied only per the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of Macally Peripherals.

The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Macally Peripherals. Macally Peripherals assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. Macally is a trademark of the Mace Group, Inc. All other product names, trademarks, and registered trademarks in this document are the property of their respective holder. Copyright® 2020 by Macally Peripherals

FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warranty

Macally peripherals warrant that this product will be free from defects in title, materials, and manufacturing workmanship for one year from the date of purchase. If the product is found to be defective then, as your sole remedy and as the manufacturer’s only obligation, Macally will repair or replace the product. This warranty shall not apply to products that have been subject to abuse, misuse, abnormal electrical or environmental conditions, or any condition other than what can be considered as normal use.

Warranty Disclaimers
Macally Peripherals makes no other warranties, express, implied, or otherwise, regarding the BTMLUXKEY, and specifically disclaims any warranty for merchantability or fitness for a particular purpose. The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may not apply to you. This warranty provides you with specific legal rights. There may be other rights that you have that vary from state to state.

Limitation of Liability
The liability of Macally Peripherals arising from this warranty and sale shall be limited to a refund of the purchase price. In no event shall Macally Peripherals be liable for costs of procurement of substitute products or services, or for any lost profits, or any consequential, incidental, direct or indirect damages, however, caused and on any theory of liability, arising from this warranty and sale. These limitations shall apply notwithstanding any failure of the essential purpose of any limited remedy. V1.1.

Hardware Basics

• Key print color spec
• White print: Calculator keys
• Blue print: Bluetooth keypad
• Common keys: all numbers, operators, Backspace and Mode switch
• TAX keys
• Mode switch key: Toggle between BT keypad and Calculator Pairing light LED(blue)
• Pair key: In BT mode, press it for 3-5 seconds until the LED flashes blue to start the pairing process
• Calculator keys explained
• CA/ON: clear all entries, memory, and GT; wake up the
• Calculator after sleeping
• CE/C: clear entry
• R/CM: clear memory, recall memory
• M+: add to current memory
• M-: subtract from current memory
• Send: send the number displayed on Calculator screen to the BT-connected computer or device
• GT: total key %: operator, divided by 100
• Backspace: delete the last digit on the right +/-: reverse the positive or negative sign on the displayed number
• /: operator, division
• *: operator, multiplying
• +Tax: add the sales tax to the displayed number and display the total
• -Tax: subtract the sales tax from the displayed number and display the total

Pairing the keypad with Mac

1. Make sure the keypad is turned on, press and hold down the blue Pair key for 3-5 seconds to set the keypad into pairing mode (flashing blue LED). Bring the keypad within the 1ft range to your Mac.
   
2. Click on the Bluetooth icon located in the upper right corner of your Mac’s menu bar. Make sure Bluetooth is “ON” then select “Open Bluetooth Preferences” from the drop-down menu.
   
3. From the Bluetooth screen, wait for the Macally Bluetooth Keypad to show up then click on “Pair” or “Connect” to add it. NOTE: It may take up to a minute for the device to show up on the screen.
   
4. Once pairing is completed the Bluetooth keypad will show “Connected”. If you are having issues connecting, try turning Bluetooth off then turn on and try re-pairing the keypad again.

Pairing the keypad with a Windows PC

1. Make sure the keypad is turned on, press and hold down the blue Pair key for 3-5 seconds to set the keypad into pairing mode (flashing blue LED). Bring the keypad within the 1ft range to your Windows PC.
2. Open your Windows Bluetooth settings and click on “Add a device”.
   
3. From the Bluetooth screen, wait for the Macally Bluetooth Keypad to show up then double click on it to add it. NOTE: It may take up to a minute for the device to show up on the screen.
   
4. After a short period, Windows will show the following screen indicating that the keypad is now paired with the computer. Please note that the driver installation may take a few minutes. Windows will notify you when the keypad is ready to use.

Please note that if you are using a different Windows OS version, your screen may differ from the above diagrams.

Pairing the keypad with iPad and iPhone

1. To connect the Bluetooth keypad to your iPad or iPhone, bring them together within 1ft range.
2. Then turn on the keypad, press and hold down the blue Pair key for 3-5 seconds, The pairing light flashes blue to indicate the keypad is in pairing mode.
3. In your iPad or iPhone, go to Settings, select Bluetooth, under OTHER DEVICES, find and tap on the Macally keypad to connect.
4. Once the keypad appears as “Connected” in Bluetooth, you are ready to use it.

Pairing the keypad with Android device

1. To connect the Bluetooth keypad to your Android device, bring them together within a 1ft range.
2. Then turn on the keypad, press and hold down the blue Pair key for 3-5 seconds, The pairing light flashes blue to indicate the keypad is in pairing mode.
3. In your Android device, go to Settings, select Connected devices, make sure Bluetooth is on, tap to open Bluetooth, tap on Pair new devices, and tap to select the discovered Macally keypad to pair.
4. Once the keypad appears Connected in the list, you are ready to use it.

Using the Calculator

1. Please read the Hardware Basics section on page 3 to understand the function of all the calculator keys.
2. Setting up your local sales tax rate. Press the mode switch key to Calculator mode, then press keys in sequence, CA/ON, Set, +Tax key, (your local tax rate, for example, enter 7.75 for tax rate 7.75%), lastly press +Tax key to save the setting and complete. Example: if you enter a number, for example, 10, then press the +Tax key, the screen will display 10.775 by adding the tax, if you press the -Tax key again, the screen will display 10 by subtracting the tax.
3. Sending the number from the Calculator to a computer or device. You may send the current number on the calculator display to a currently paired and connected computer or device. Just open the application such as Excel sheet etc on the computer or device in entering mode, then press the “Send” key to transfer a number from the calculator to the opened application on your computer or device.
4. CA/ON key: clear all number display and memory/operation, GT memory. CA/ON can turn on the calculator from sleep mode, but couldn’t turn off the calculator.
5. CE/C key: cancel the current display or entry if the error is made.
6. R/CM key: CM-clear memory, RM-recall memory, or get the result of memory operation.
7. Example of M+ operation: Item 1 is $100 at a 10% discount: type 100*.9 = 90 M+ (Memory = 90) Item 2 is $200 at a 30% discount: type 200*.7 = 140 M+ (Memory = 230) Item 3 is $150 at a 20% discount: type 150*.8 = 120 M+ (Memory = 350) How much did I spend altogether? Press R/CM to display total additions of 350! Press R/CM again to clear memory.
8. GT key: The total key displays the sum of each “=” key operation, adding the result(number) every time the “=” key is pressed; pressing the GT key again clears the GT memory. Example: type 10 + 10 = 20, 20 + 20 = 40, 30 + 30 = 60 Now press the GT key, and the screen displays 120 as total.

REFERENCE LINK

https://www.verbatim.com/