Boat Soundbar speaker system AAVANTE BAR 3100D User Manual

Boat Soundbar speaker system AAVANTE BAR 3100D User Manual

Discover a new era of immersive, cinematic audio experience at home with boAt AAVANTE BAR 310 Soundbar that comes with Do/lDbiygi Dtaigl Pit.lau Wlsith a powerful 260W total audio output, the sleek and slim along with the versatile subwoofer brings every aspect of your entertainment be it music, shows or volume and true clarity it deserves. The thumping drivers deliver clarity on mid and high ranges, an the rumbling lows. The 5.1 channel surround sound system provides a balanced sound and deep b even video games, so that you can experience cinematic sound that revolves around you. Stay plug of connectivity options, including the Bluetooth V5.0 wireless technology. Dolby Digital/ Digital: Pities equipped with Dol/b Dyig Ditigalit Paltuleschnology for an enthralling, breath-taking a experience. Dolby/Digital Plfuesatures greatly improved sound, more channels, less compression, and experience as compared to standard-definition audio formats. At higher bit rates it is virtually indist Bring your home to life with boAt AAVANTE BAR 3100D.

OVERVIEW

1. Multifunction control knob
2. (Power/Active lnput Selection/Volume)
3. Left(AUX)
4. Right(AUX)
5. HDMI (ARC)
6. OPTICAL
7. Surround Left
8. Surround Right
9. Center
10. Front Left
11. Front Right
12. AC IN
13. USB

SPECIFICATIONS

Remote Control – Control/Functions

1. Standby Mode for Power On/Off
2. Connect to or disconnect from the pairing device (Long press for more than 2 seconds)
3. Reset the Channel volume levels to factory default and sw to Music mode (Long press for more than 2 seconds)
4. Increase Treble Intensity
5. Increase master volume
6. Previous Program (Works under only USB & BT modes)
7. Decrease master volume
8. Decrease Subwoofer Channel’s volume
9. Subwoofer Channel’s volume
10. Music EQ Effect
11. News EQ Effect
12. Decrease Centre Channel’s volume
13. Decrease Surround Channel’s volume
14. Mute / Unmute
15. Input Mode (AUX/USB/HDMI (ARC)/OPT/BT)
16. Turn on/off LED Display (Works under only power on sta16. Increase Treble Intensity
17. Next Program (Works under only USB and BT modes)
18. Increase Subwoofer Channel’s volume
19. Movie EQ Effect
20. Sports EQ Effect
21. Increase Centre Channel’s volume
22. Increase Surround Channel’s volume
23. Play/Pause (Works under only USB and BT modes

Remote Control Battery Replacement

Please insert the batteries as indicated below

A: Remove the battery compartment cover

B: Insert 2 AAA batteries according to the markings inside compartment

C: Close the compartment.

Positioning the Sound Bar

Place on a flat Surface
Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally
with the TV screen. Allow some space between the speaker and the wall. Don’t place inside a cabinet
or an a walled shelf. Follow this guidance for best sound output and good airflow around the sound bar

Mount on the wall

WARNING: If you don’t feel confident to correctly and securely wall-mount the sound bar, Seek the assistance of an experienced person or professional.
Install the speaker on a vertical, fast, reinforced area of wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum performance, allow at least 25mm/1’’distance between the sound bar and the TV

OPERATION INSTRUCTIONS

1. Plug in the power cord and the display will light up (Standby mode)
2. Switch on the soundbar by using power button on soundbar or by using STANDBY button on remote. After switching on, the default input mode will appear on display
3. Input mode can be changed by using the INPUT button on remote
4. Toturn off, press and hold he Power button for 2 seconds or unplug from wall outlet

Note: For Dolby Digital/Digital Plus audio, you can play the movies or videos that contain Dolby Digital/Digital Plus technology under Optical or HDMI (ARC) mode. Go to the Sound or Speakers menu of the TV/Computer and select External Speakers or Audio System. Refer to the TV’s sound settings / computer’s audio control panel to select the audio system. The soundbar LED will display ‘    ‘ while the videos with Dolby Digital/Digital Plus technology gets played. If you use set top box or any other media device such as Blu ray other than TV then the LED won’t display ‘ ’, though the Dolby audio will be played regardless of that.

Playing Audio via BT Connection

1. Turn on sound bar and then short-press the Input button to switch to BT mode and the LED will show
2. Activate the pairing function on your phone or other compatible device and select“Aavante Bar 3100D”
3. When successfully paired, you will hear a tone and the LED Display will stay on
4. The remote control includes BT mode playback control

Notes:

• If your pairing device gets switched off or gets manually disconnected, the sound bar will automatically enter pairing mode
• Successful connection will be re-established with the already paired device(s) once you re-enter wireless range (10m). To connect to other devices, repeat the above pairing steps.
• There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if no device is paired, so switch off if not in use

AUX mode

• Connect the sound bar to your PC, tablet, smartphone, TV, or other device using the included audio cable. Short-press the Input button to switch to audio input mode with the LED Display lit up (AU)
• In this mode, playback can only be controlled on your connected device

Note: For some computers, you may need to access the audio control panel to manually set the audio control panel to manually set the sound bar

Playing Audio via USB Port

The sound bar automatically switches to USB input mode with the LED display ( ) when a USB flash drive is inserted (this mode isn’t selectable on the sound bar or remote control unless a USB flash drive is connected).

1. Ensure that your USB flash drive contains MP3 or WMA audio files (other file types not supported)
2. Connect the USB flash drive to the USB port on the sound bar (or your own USB extension cable connected to the USB port); music will automatically play
3. The remote control includes USB input mode playback controls

Optical Mode

Use this operating mode to play music from the optical digital input for example from a TV on your soundbar.
The TV must have an optical digital output. Use an optical cable to make the connection. Proceed as follows:

• Connect the optical cable to the optical digital output of your TV.
• Then connect the optical cable to the optical digital input of your soundbar.
• Switch the TV set and sound bar on. Set the connected TV to “PCM Stereo” or “Stereo 2.0”(For any doubt or Start playing on the TV.
• Press “INPUT” button on the sound bar or on the remote controller to select the OPTICAL mode to open optical digital input of your sound bar. Once switched to Optical mode, the LED display will show . Movie or music that you selected will be played on through sound bar and TV.
• You can use the volume buttons to adjust the volume to your requirements.
• If you wish, you can change the audio settings using the relevant buttons on the remote control.

HDMI Mode

1. The Soundbar supports HDMI with Audio Return Channel(ARC). lf your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable
2. Using an HDMI compatible cable, connect the HDMI TV(ARC) connector on the soundbar to the HDMI ARC connector on the TV. The HDMI ARC connector on the TV might be labelled differently. For details, see the TV user manual. Once switched to HDMI Mode, the LED will display ‘ ’.

Important Safety Instructions

Caution:
To reduce the risk of electric shock, do not dismantle the AAVANTE Bar 3100D and do not expose the apparatus to rain or moisture.

RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)

This symbol alerts you about the presence of uninsutated dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute an electric shock to a person or persons.
Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.

Important Notes

• Before turning on the power for the first time, make sure the power adaptor is properly connected.
• This sound bar is specially developed for LED/LCD/Plasma & Smart TV’s: It should r be used in combination with CRT TV’s (Cathode Ray Tube TV’s) in order to avoid image interferences. – Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.
• Operate the soundbar only as instructed in this manual and this instruction manual should be retained for future reference.
• If connected to a TV via Bluetooth there may be a sound lag between the TV and the device. To solve this, the best option is to connect the TV and Soundbar using an aux/ optical/ HDMI output.
• The Soundbar may not be compatible with all Bluetooth capable TV’s. In this case, please use an aux/ optical/ HDMI output to connect the Tv and Soundbar to one another.

Please ensure that the boAt AAVANTE Bar 3100D is not exposed to the following:

• Dropping or splashing water or placed in a humid atmosphere such as a bathroom.
• places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiate too much heat.
• Blocking ventilation or in a dusty area.
• Areas where there is constant vibration.
• Humid or moist places.
• Do not place the sound bar near candles or other naked flames.