Table of contents
show
Boltune ANC Wireless Stereo Headphones User Guide
Product Diagram
- ANC Button
- Microphone
- 3.5mm Audio Port
- Working Indicator
- Power Button
- Volume – / Previous Track (long press)
- Volume + / Next Track (long press)
- Micro USB Charging Port
- Charging Indicator
Note:
- A voice prompt will be heard when the battery is low.
- Switch the ANC Button to activate / deactivate the noise cancellation function. Its indicator will turn on / off accordingly.
Package Contents
- 1 x Boltune Wireless ANC Headphones (BT-BH010)
- 1 x USB Charging Cable
- 1 × 3.5mm Audio Cable
- 1 x Travel Pouch
- 1 x User Guide
How to Use
- Charging
- Connect the charging port with any USB charging adapter or active computer USB port.
- Charging will start automatically with the LED indicator turning red.
- The headphones are fully charged when the LED indicator turns off.
- Pairing
- Make sure the headphones and your Bluetooth® device are next to each other (within 3 feet / 1 meter).
- Press and hold the Power Button for 5 seconds to bring the headphones into pairing mode with the LED indicator flashing blue and red.
- Activate Bluetooth® on your phone and search for nearby Bluetooth® connections.
- Find “Boltune BT-BH010” in the search results. Tap on the name to connect. Once connected, the LED indicator will flash blue once every 3 seconds.
Note:
- The Bluetooth® headphones can remember previously paired devices. If you have previously paired the headphones with a device, simply turn on your device and the headphones, they will connect automatically without going into pairing mode.
- In case the headphones fail to pair with your Bluetooth device, clear the pairing history by pressing and holding the Volume + and Volume – Buttons simultaneously for 7 seconds until you hear a beep tone and the LED indicator flashes red and blue alternately to start pairing again.
Control Functions
REFRENCE LINK
