Bonsen S3102 16 Cross-Cut Paper Shredder Sheets User Manual
CONTACT US!
Please give us a chance to make it right and do better! Contact our friendly customer service department for help firstly. Replacements for missing or damaged parts will be shipped.
BEFORE YOU START
- Please read all instructions carefully.
- Retain instructions for future reference.
- Read through each step carefully and follow the proper order.
- Please place this machine on a flat and stable surface, please be careful not to tip over the machine.
- In case the machine breaks down and cannot be used appropriately. Dangerous, please do not disassembly, modify or repair the machine in any way on your own.
- To avoid electric shock or accidental injury.
- When emptying the waste bin, moving, or not using the machine for a certain period of time, please unplug and disconnect the power
- To avoid fire accident or electric shock.
- Please do not splash water in this machine.
- To avoid fire accident or electric shock.
- Please do not use this machine near a heating machine or a cooling machine, or in a place with high temperature, high humidity, and heavy dust.
- To avoid fire accident or electric shock. Please do not put adhesive tape, carbon paper, fabric, plastic film, etc. into the Machine for crushing.
- To avoid failures of the machine.
- Please do not damage or process the power cables, or do not place heavy objects on the cables.
- To avoid fire accident or electric shock.
- If abnormal conditions such as smoke or odor occurred, please disconnect the power and stop using it immediately.
- To avoid fire accident or electric shock.
- Please do not use if the shredder or the power cable is damaged or defective.
- To avoid fire accident or electric shock.
IMPORTANT SAFETY INTRODUCTIONS
- This is the safety alert symbol. It is used to alert you to potential injury hazards. Obey all safety messages that follow this symbol to avoid possible injury and death.
- Thank you for buying this product, we would like to express our heartfelt thanks and best wishes to you for your support again! The functions of this product are suitable for personal and group office use, and we believe that the appearance, shredding ability and confidentiality of this product will provide you with a smooth shredding experience.
- Please kindly let children and pets keep away from the machine.
- There are sharp blades inside the machine so as to avoid injury.
- Please kindly let your hands keep away from the sharp blades and the entry of paper shredder.
- There are sharp blades inside the machine so as to avoid injury. ( Please kindly let your hair keeps away from the entry of paper shredder.
- If your hair is accidentally sucked in, please kindly try to press the “Reverse” button and get rid of the danger.
- Please kindly let your clothing or some small items keep away from the entry of paper shredder like tie, necklace, sleeves, jewelry, etc.
- If something is accidentally sucked in, please kindly try to press the “Reverse” button and get rid of the danger.
- Please do not spray flammable gas on the machine.
- To avoid fire accident.
- Please kindly don’t touch the sharp edges to avoid injury.
- This equipment is not intended for use by children. Avoid touching the media feed So opening with the hands, clothing or hair. Unplug this equipment when not in use for an extended period of time, hazardous moving part is in this equipment, keep body parts away from moving parts.
- It cannot be over 16 sheets in one time for the quantity of shredding.
KNOW YOUR SHREDDER
PRODUCT SPECIFICATIONS
CONTROL PANEL
OPERATING INSTRUCTIONS
- Press (POWER) ON to activate (blue).
- Feed paper straight into paper entry and release.
Press (REVERSE) ) to reverse (blue), Pull out the jammed paper. (Releasing your finger the light will be OFF and stop “Reverse”)
Press (REVERSE) ) to reverse (blue), Pull out the jammed paper. (Releasing your finger the light will be OFF and stop “Reverse”)
- Press (w) to forward (blue), and stay for 3-5 seconds. Repeat the action around 2-3 times if get a very serious jam.(Releasing your finger the light will be OFF and stop”Forward”)
- When finished shredding set to OFF (© ).
Shred CD (Hold the edge of CD, place the CD within the marked area, feed straight into paper entry and release.
Overheat (overheat indicator is in red, need to wait for cooling down) Cool down around 20 minutes
Overload (overload indicator is in red with flashing, need to take out excess papers).
Clean the confetti (Waste bin full indicator is in red with flashing, the machine stops working, pulls out the waste bin, and cleans the confetti to put the waste bin in place, the machine can continue to use).
PRODUCT MAINTENANCE
- All shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding, and could ultimately stop running. To avoid these problems, we recommend you oil your shredder once a month.
- Due to the precision and sharpness of the blades of the shredder, please keep foreign objects like clothes corner, tie, hair, etc. away from shredder openings to avoid damage in daily use.
- When the waste bin is full, please empty it in time to avoid affecting the normal operation of the machine.
- Do not put broken fabric, plastic (except for credit card) , hard metal, etc. into the shredder.
- In order to prolong the service life of the shredder, it is advisable that the amount of shredded paper should be lower than the maximum amount of shredded paper specified in the manual.
- While clean the face of machine, please kindly plug out first or make the shredder under OFF status and then wipe it with a soft cloth with detergent or soft soapy water. Please kindly don’t let the detergent or soapy water goes through the shredder inside and don’t use bleach, gasoline or thin liquid to wash the shredder. Please don’t allow sharp objects to scratch the casing, which may affect the effect of shredder vision or will damage the shredder.
TROUBLE SHOOTING
If the above answers cannot solve your problems, please kindly contact with us customer service team via email support01@bonsenglobal.com.
LIMITED WARRANTY
This product implements free maintenance for product failures due to non-human factors within 12 months. We stand by our product and offer a 30-day money-back guarantee. During this time, you could return them without any paying extra fee if there is a manufacturing defect in it. Please rest assured that the returns are free and easy if there is a manufacturing defect. Otherwise, it would be the customer’s responsibility to cover the shipping fee. Products on sale are also returnable. If the product isn’t meeting your expectations, please email within 30-days of receipt. We will help you to either return or exchange your product. Your original form of payment will be refunded in full once the full return is complete. After 30-days orders may be subject to a 20% restocking fee and all shipping and handling charges will be the responsibility of the customer. Additional return details are listed below. After 60-days the purchase from BONSEN is non-refundable.
Recycle of the Shredder
Please make sure to send waste electronic products and packaging materials to special collection points, so as to avoid uncontrolled and unnecessary waste disposal and help material recycling. The packaging materials have been selected for their environmental friendiness and ease of disposal and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.
DOWNLOAD PDF LINK
