BOSCH Smart Home Eyes Outdoor Camera User Manual
Product description
The Eyes outdoor camera is a camera that is connected via Wi-Fi and controlled via smartphone app. It records relevant occurrences and notifies you via your smartphone. With the integrated LED front light and the LED spotlights, the camera combines reliable property surveillance with ambient outdoor lighting.
Safety instructions
The device is not a toy! Do not allow children to play with it. Never leave the packaging material lying around unattended. Plastic film and small parts may pose a danger to children. Do not open up the device. It does not contain any parts to be maintained by the user. If a fault occurs, have the device checked by a specialist. We accept no liability for material damage or personal injury which is caused by improper use or by not observing the safety instructions. In these cases, any guarantee claim becomes void! We accept no liability for consequential damage.
Product overview
| Item Name Status | ||
| 1 | Camera housing | – |
| 2 | Front light | Can be used as a motion light (automatical- ly comes on when movement is detected) |
| 3 | Motion detector | 180° movement capture |
| 4 | Speaker cove | Protects the speaker and microphone underneath |
| 5 | Lens | Covers a viewing angle of 120° horizontal- ly; can be adjusted by hand to guarantee an optimal viewing angle |
| 6 | LED spotlights (top/ bottom) | Top and bottom LED spotlight, can be used for mood lighting |
| 7 | Reset button opening | Resets the camera to factory settings, removes it from the network, erases all recordings |
| 8 | Terminal block | Connection for live conductor, neutral conductor and earth conductor |
| 9 | Opening for cable entry | Ensure that the 230 V power cable is fed through this hole |
| 10 | Locking screw | Allows you to fasten the camera to the wall bracket in a stable manner |
| 11 | Drill holes | Drill holes for fastening the camera to the wall bracket with screws |
Mounting instructions
- Mounting must be carried out following the applicable requirements. Not observing the requirements may lead to damage to property and/or injury, even as far as danger to life.
- The camera requires a power supply of 230 volts alternating current via a three-core cable (live, neutral, earth).
- When connecting the device terminals, ensure that permitted wires and wire cross-sections are used.
- The camera must be mounted on the wall at a height of 2.0 to 2.5 m above the floor
- The camera must be affixed with the lens pointing downwards.
- The power circuit to which the device and the load are connected must be secured with a circuit breaker in accordance with EN60898-1 (trigger characteristics B or C, max. 16 A rated current, min. 6 kA breaking capacity, energy limitation class 3).
- Installation guidelines in accordance with VDE 0100 or HD384 or IEC 60364 must
be observed. The circuit breaker must be easily accessible for the user and labelled as a disconnector for the device.
Maintenance & cleaning
The device does not require maintenance. Leave any repairs to a specialist. Clean the device with a soft, clean, dry and lint-free cloth. When cleaning, do not use any cleaning agents containing solvents.
Technical data
| Device type designation | SVO-1601-220 |
| Resolution | 1920 x 1080 (1080p) |
| Horizontal capture range | 120° |
| Vertical capture range | 79° |
| Wi-Fi | IEEE 802.11 b/g/n, 2.4 GHz |
| Wi-Fi range | < 80 m |
| Max. transmitting power | 20 dBm |
| Power supply | 230 V~/50 Hz |
| Power consumption | max. 15 W |
| Power consumption of front light | max.: 7 W |
| Power consumption of top/bottom light | 1 W each |
| Ambient temperature | –20 °C … +50 °C |
| Software class | Class A |
| Housing dimensions (W × H × D) | 210 mm x 70 mm x 115 mm |
| Weight | 750 g |
Open source software
This Bosch Smart Home product uses open-source software. The licence information about the open-source software used depends on the software version of your device or your smartphone app. New software versions become available for your product at regular intervals. You can find information about the current software version and the opensource software used in the respective settings area in the smartphone app. You can also find information about the licences and the source code of the open-source software at: www.bosch-smarthome.com/open-source-software
REFERENCE LINK
