BOSE 700UC Wireless Headphones User Manual

BOSE 700UC Wireless Headphones User Manual

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Only use attachments/accessories specified by the manufacturer.
8. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CONTENTS

Confirm that the following parts are included:

NOTE: If any part of the product is damaged, do not use it. Contact your authorized Bose dealer or Bose customer service.

HOW TO WEAR

ADJUST THE HEADPHONES

1. With the outer earcup facing toward you, firmly grip the side of the headband.
   
2. With your other hand, grip the earcup. Move the earcup up or down to adjust the position.
   
3. Repeat steps 1-2 for the other earcup.

BUTTON ORIENTATION

The inner scrims (cloth covers) of the headphone earcups are marked with an L (left earcup) and R (right earcup). There are two buttons on the right earcup and one on the left earcup. Match the right earcup with your right ear and the left earcup with your left ear. Place the headphones on your head with the buttons facing behind you.

VOICE ASSISTANT OPTIONS

You can program the headphones to quickly and easily access Google Assistant or Amazon Alexa, or voice control capabilities on your mobile device.

SET UP YOUR VOICE ASSISTANT
To set up your Voice Assistant, use the Bose Music app. You can access this option from the Settings menu.

CONNECT THE AUDIO CABLE

Use the audio cable to connect a non-wireless device or if the headphone battery is depleted.

1. Insert the cable into the 2.5 mm jack on the right earcup.
   
2. Insert the other end of the cable into the 3.5 mm jack on your device.

CARE AND MAINTENANCE

STORE THE HEADPHONES
The earcups rotate for easy, convenient storage.

1. Adjust the earcups so that the headband is at its smallest size.
2. Rotate both earcups inward so they lay flat.
   
3. Place the headphones flat into the case.
   

TROUBLESHOOTING

If you experience problems with the headphones or Bose USB Link try these solutions first:

• Charge the battery.
• Power on the headphones.
• Check the status lights.
• Make sure your mobile device supports Bluetooth connections.
• Make sure the USB Link is securely connected to your computer.
• Download the Bose Music app and run available software updates.
• Move your headphones closer to the device or the USB Link and away from any interference or obstructions.
• Increase the volume on the headphones, mobile device, music, or meeting app.
• Make sure the meeting app and operating system on your computer are up to date.
• Restart your computer, or sign out of the meeting app and sign back in.
• Check for available USB Link firmware updates.

TRY THESE SOLUTIONS FIRST

If you experience problems with the headphones or Bose USB Link try these solutions first:

• Charge the battery.
• Power on the headphones.
• Check the status lights.
• Make sure your mobile device supports Bluetooth connections.
• Make sure the USB Link is securely connected to your computer.
• Download the Bose Music app and run available software updates.
• Move your headphones closer to the device or the USB Link and away from any interference or obstructions.
• Increase the volume on the headphones, mobile device, music, or meeting app.
• Make sure the meeting app and operating system on your computer are up to date.
• Connect another mobile device.
• Restart your computer, or sign out of the meeting app and sign back in.
• Remove the USB Link from the USB port on your computer, and then reinsert it.
• Check for available USB Link firmware updates.

OTHER SOLUTIONS
If you could not resolve your issue, see the table below to identify symptoms and solutions to common problems. If you are unable to resolve your issue, contact Bose customer service.

REBOOT THE HEADPHONES

If the headphones are unresponsive, you can reboot them. Rebooting the headphones doesn’t clear settings or connected devices. NOTE: Do not connect the USB cable to the headphones until instructed to do so.

1. Disconnect all cables from the headphones.
2. Connect one end of the USB cable to a USB-A wall charger or computer that is powered on.
3. Press and hold the Power/Bluetooth button while connecting the small end of the USB cable to the USB-C port on the right earcup.
4. Release the Power/Bluetooth button after 2 seconds.

REFERENCE LINK

https://www.bose.com/en_us/products/headphones/noise_cancelling_headphones/noise-cancelling-headphones-700-conferencing.html#v=noise_cancelling_headphones_700_conferencing_black

DOWNLOAD PDF

BOSE 700UC Wireless Headphones User Manual